2003-June Archives by Thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jun 1 00:12:01 2003
Ending: Mon Jun 30 23:22:01 2003
Messages: 1283

• [Elecraft] Looking Forward to the 60 Mtr Board   [email protected]
  • [Elecraft] Looking Forward to the 60 Mtr Board   David Pratt
• [Elecraft] K2/100: PA Oscillation Problem: !!! FIXED !!!   [email protected]
• [Elecraft] RTC Hash on 160 Meters   [email protected]
  • [Elecraft] RTC Hash on 160 Meters   Lyle Johnson
  • [Elecraft] RTC Hash on 160 Meters   Vic Rosenthal
• [Elecraft] Summer FOX Hunt begins 6/1/03   Doc K0EVZ
• [Elecraft] FOX Posting--Lloyd K3ESE and Jim N0UR   Doc K0EVZ
• [Elecraft] Cheap PCB Holder & Pliers/Cutters   Clark L. Stewart
  • [Elecraft] Cheap PCB Holder & Pliers/Cutters   Joe P
• [Elecraft] Ultimate tuning knob?   [email protected]
  • [Elecraft] Ultimate tuning knob?   Leland Berman
  • [Elecraft] Ultimate tuning knob?   Jack Brindle
    • [Elecraft] Ultimate tuning knob?   WQ8Q
  • [Elecraft] Ultimate tuning knob?   Steve Muncy
    • [Elecraft] Ultimate tuning knob?   Michael Melland
• [Elecraft] D104 on the K2   Steve Jackson
  • [Elecraft] D104 on the K2   Tom, W6WW
• FW: [Elecraft] FOX Posting   Dan Barker
• [Elecraft] RE: cw puzzle   73 de M3MPH
• [Elecraft] Re: Begali vs Schurr   Ulrich H. Steinberg
• [Elecraft] Re: The Ultimate Iambic Paddle for us   Ulrich H. Steinberg
• [Elecraft] Desk mic for K2?   Tom, W6WW
• [Elecraft] KI6WX Crystal Filter Bandwidth Mod ?   Tom, W6WW
• [Elecraft] Questions before I begin KSB2   Parker Buckley
  • [Elecraft] Questions before I begin KSB2   Harry Yingst
  • [Elecraft] Questions before I begin KSB2   Bruce D. McLaughlin
• [Elecraft] K2 build: low sig strength on 40m   Andrew Moore
  • [Elecraft] K2 build: low sig strength on 40m   Bob Tellefsen
  • [Elecraft] K2 build: low sig strength on 40m   Harry Yingst
• [Elecraft] Soldering temperature   Tom, W6WW
  • [Elecraft] Soldering temperature   Bob Nielsen
• [Elecraft] K2 build: low sig strength on 40m (more)   Andrew Moore
• [Elecraft] (no subject)   Jeff McLeman
• [Elecraft] K2Z?   Kenneth E. Harker
• [Elecraft] K2 Front panel assembly problem   Joe P
• [Elecraft] RE:CW puzzle... From circa 1950   COLIN WHITMORE
• [Elecraft] KAT100-1 and KDSP2 conflict   Bozidar Benc
  • [Elecraft] KAT100-1 and KDSP2 conflict   Lyle Johnson
    • [Elecraft] KAT100-1 and KDSP2 conflict   Bozidar Benc
• [Elecraft] SB200 amp/soft key   Mike
• [Elecraft] kat2 question   Gary Lee
• [Elecraft] IRC Elecraft channel   n3drk
  • [Elecraft] IRC Elecraft channel   Guy Olinger, K2AV
    • [Elecraft] IRC Elecraft channel   Hank Kohl K8DD
      • [Elecraft] IRC Elecraft channel   Guy Olinger, K2AV
• [Elecraft] Sunday net   L. D. Ingram
  • [Elecraft] Sunday net   Pieter Meiring
    • [Elecraft] Sunday net   Richard Lim
• [Elecraft] 17 mhz net   Donald Nesbitt
• [Elecraft] Net   Richard Lim
• [Elecraft] Sunday Net   n3drk
  • [Elecraft] Sunday Net   f9oj
• [Elecraft] Net   Larry Anderson, W6LAR
• [Elecraft] Use of external keyer with K2   James R. Kauten, MD, W4TE
  • [Elecraft] Use of external keyer with K2   Thomas M. Beaudry
  • [Elecraft] Use of external keyer with K2   George, W5YR
  • [Elecraft] Use of external keyer with K2   Tom Hammond
• [Elecraft] C-199   pfb
  • [Elecraft] C-199   Edward Kenworthy
• [Elecraft] June 1 Net Report   Donald Nesbitt
  • [Elecraft] June 1 Net Report   Donald Nesbitt
• [Elecraft] MH 2 Mic Sale   Tim Ellam
• [Elecraft] FOX Lloyd K3ESE heard   Doc K0EVZ
• [Elecraft] FOX Lloyd K3ESE spot update   Doc K0EVZ
• [Elecraft] FOX Jim N0UR ~14.057   Doc K0EVZ
  • [Elecraft] FOX Jim N0UR ~14.057   R. Coakley
  • [Elecraft] FOX Jim N0UR ~14.057   George, W5YR
• [Elecraft] RE: CQ FOX, today!   Doc K0EVZ
• Fw: [Elecraft] IRC Elecraft channel   n3drk
• [Elecraft] Tim's attic antenna   Larry Anderson, W6LAR
• [Elecraft] Manuals for downloading   Bob McCulla
• [Elecraft] solar panels   n3drk
  • [Elecraft] solar panels   rich a.
• [Elecraft] K1 #1534 / K1-4 Comes Alive, very first QSO is approaching!   [email protected]
• [Elecraft] Ultimate tuning knob?   Julian (G4ILO)
  • [Elecraft] Ultimate tuning knob?   Eric Swartz WA6HHQ - Elecraft
    • [Elecraft] Ultimate tuning knob?   [email protected]
    • [Elecraft] Ultimate tuning knob?   Bozidar Benc
      • [Elecraft] Ultimate tuning knob?   [email protected]
• [Elecraft] Ultimate tuning knob?   73 de M3MPH
• [Elecraft] solar   John Veach
• [Elecraft] D-104 trivia   Steve Jackson
• [Elecraft] the Fox speaks [was FOX Posting]   Lloyd Lachow
  • [Elecraft] the Fox speaks [was FOX Posting]   George, W5YR
• [Elecraft] 40m low sig: is C4 supposed to short to L1 case?   Andrew Moore
  • [Elecraft] 40m low sig: is C4 supposed to short to L1 case?   Rich Lentz
  • [Elecraft] 40m low sig: is C4 supposed to short to L1 case?   Bob Tellefsen
    • [Elecraft] 40m low sig: problem solved   Andrew Moore
• [Elecraft] VCO voltages only in range on 80 & 40.....Others > 8.0V   [email protected]
• [Elecraft] Angle of attack - PIC Question - WAY off topic!   Dan Barker
  • [Elecraft] Angle of attack - PIC Question - WAY off topic!   John J. McDonough
  • [Elecraft] Angle of attack - PIC Question - WAY off topic!   Bob - AG5Q
    • [Elecraft] Angle of attack - PIC Question - WAY off topic!   Robert Parker
• [Elecraft] BALANCED OUTPUT ATU, from PALSTAR   Tom Hammond
• [Elecraft] Construction Order...   Dennis Ponsness WB0WAO
  • [Elecraft] Construction Order...   Edward Kenworthy
  • [Elecraft] Construction Order...   Phil Wheeler
  • [Elecraft] Construction Order...   Kevin Cozens
  • [Elecraft] Construction Order...   Pieter Meiring
• [Elecraft] SSB/CW synchronous tuning   Sverre Holm
• [Elecraft] Realign xtal filter for changed sidetone frequency?   Sverre Holm
  • [Elecraft] Realign xtal filter for changed sidetone frequency?   Vic Rosenthal
• [Elecraft] Realign xtal filter for changed sidetone frequency?   [email protected]
  • [Elecraft] Realign xtal filter for changed sidetone frequency?   Dave
    • [Elecraft] Realign xtal filter for changed sidetone frequency?   David A. Belsley
      • [Elecraft] Realign xtal filter for changed sidetone frequency?   Sverre Holm
    • [Elecraft] Realign xtal filter for changed sidetone frequency?   Vic Rosenthal
• [Elecraft] Orion & K2   [email protected]
  • [Elecraft] RE: Filter skirts (was "Orion & K2")   Brian Machesney
• [Elecraft] K1 SSB project Status: searching beta-tester   giuliano
• [Elecraft] Realign xtal filter for changed sidetone frequency?   [email protected]
• [Elecraft] PLL Ref Osc range question...   Trevor Jacobs
  • [Elecraft] PLL Ref Osc range question...   Eric Swartz WA6HHQ - Elecraft
    • [Elecraft] PLL Ref Osc range question...   Trevor Jacobs
  • [Elecraft] PLL Ref Osc range question...   Bob Tellefsen
• [Elecraft] K1 Frequency Stability:   Martin AC6RM
• [Elecraft] Power Supply Problem   [email protected]
• [Elecraft] KPA100 assembly question   Bob Nielsen
  • [Elecraft] Re: KPA100 assembly question   Wayne Burdick
    • [Elecraft] Re: KPA100 assembly question   Bob Nielsen
      • [Elecraft] Re: KPA100 assembly question   Eric Swartz WA6HHQ - Elecraft
      • [Elecraft] Re: KPA100 assembly question   Bob Nielsen
    • [Elecraft] Re: KPA100 assembly question   Bozidar Benc
      • [Elecraft] Re: KPA100 assembly question   Tom Hammond
• [Elecraft] Birdies   William Myers
  • [Elecraft] Birdies   Sverre Holm
    • [Elecraft] Birdies   Sverre Holm
• [Elecraft] K1 Frequency Stability   Julian (G4ILO)
  • [Elecraft] K1 Frequency Stability   Dave
• [Elecraft] Ultimate tuning knob?   Julian (G4ILO)
  • [Elecraft] Ultimate tuning knob?   Trevor Day
• [Elecraft] RSGB HF Convention - flash programme information.   g3pjt
• [Elecraft] Who stole the ionosphere?   Julian (G4ILO)
• [Elecraft] Ultimate tuning knob?   [email protected]
• [Elecraft] Ultimate tuning knob?   Julian (G4ILO)
• [Elecraft] Who stole the ionosphere?   Hank Kohl K8DD
• [Elecraft] Reciever Pre-Alignment   pfb
  • [Elecraft] Reciever Pre-Alignment   Bruce D. McLaughlin
• [Elecraft] Sidetone Mod 47 vs 82mH   Jeff Burns
• [Elecraft] WriteLog SSB TX initiation   Brian Machesney
• [Elecraft] kpa100 power transistor   John Cooper
  • [Elecraft] kpa100 power transistor   Tom Hammond
• [Elecraft] kpa100   John Cooper
  • [Elecraft] kpa100   Bob Nielsen
    • [Elecraft] kpa100   Lyle Johnson
• [Elecraft] keyers...   Indy
• [Elecraft] The K2 Noise blanker realy works! KDSP2?   Deni
  • [Elecraft] The K2 Noise blanker realy works! KDSP2?   Vic Rosenthal
    • [Elecraft] The K2 Noise blanker realy works! KDSP2?   Tom Hammond
• [Elecraft] Re: External Keyer w/K2   Tom Hammond
• [Elecraft] Receiver Pre-Alignment   pfb
• [Elecraft] K1 Frequency Stability   Dave
  • [Elecraft] K1 Frequency Stability   Martin AC6RM
• [Elecraft] US 60M on July 3!   Jack Brindle
• [Elecraft] test   k6xr
• [Elecraft] Hand Punch - Handy as a pocket in a shirt!   Tom Hammond
  • [Elecraft] Hand Punch - Handy as a pocket in a shirt!   Phil Wheeler
  • [Elecraft] Hand Punch - Handy as a pocket in a shirt!   Sandy W5TVW
  • [Elecraft] Hand Punch - Handy as a pocket in a shirt!   Rick Commo
    • [Elecraft] Hand Punch - Handy as a pocket in a shirt!   Tom Hammond
• [Elecraft] How to put an Elecraft K2 on 60 meters (updated)   Wayne Burdick
  • [Elecraft] How to put an Elecraft K2 on 60 meters (updated)   Phil Wheeler
  • [Elecraft] K7NUU Covers   Lyle Johnson
    • [Elecraft] Re: K7NUU Covers   Wayne Burdick
• [Elecraft] Elecraft Net   Roger Dallimore
• [Elecraft] Multicore solder   Terry Kniffen
  • [Elecraft] Multicore solder   Phil Wheeler
• [Elecraft] Birdies   William Myers
• [Elecraft] 14 Matched Crystals for K2   Daniel L Brinneman
  • [Elecraft] 14 Matched Crystals for K2   Phil Wheeler
  • [Elecraft] 14 Matched Crystals for K2   Kevin Cozens
    • [Elecraft] 14 Matched Crystals for K2   Tom, W6WW
      • [Elecraft] 14 Matched Crystals for K2   Ron D'Eau Claire
      • [Elecraft] 14 Matched Crystals for K2   Phil Wheeler
      • [Elecraft] 14 Matched Crystals for K2   Bob Nielsen
      • [Elecraft] 14 Matched Crystals for K2   Tom, W6WW
• [Elecraft] KAF2   Kevin Rock
  • [Elecraft] KAF2   Phil Wheeler
  • [Elecraft] KAF2   Parker Buckley
    • [Elecraft] KAF2   Kevin Rock
• [Elecraft] Question - Signal Oscillator   Tom Mc
• [Elecraft] I'm happy as can be!   [email protected]
• [Elecraft] PC software used with K2: updated info needed for manuals   Wayne Burdick
• [Elecraft] kpa100   Martin AC6RM
• [Elecraft] FS: K1 40/20   Mark Perrin
• [Elecraft] Soldering station: WLC100 vs. WTCPT   [email protected]
• [Elecraft] k2 3269 all grown up   John Cooper
  • [Elecraft] k2 3269 all grown up   Thomas M. Beaudry
• [Elecraft] ARS Sprint   Doc K0EVZ
  • [Elecraft] ARS Sprint   Steve
• [Elecraft] Transverter IF's   Harry Yingst
• [Elecraft] Same here.   David Walker
• [Elecraft] 14 Matched Crystals for K2   Daniel L Brinneman
• [Elecraft] kpa100 - wait for the fan?   Sam Smith
  • [Elecraft] kpa100 - wait for the fan?   Ron D'Eau Claire
• [Elecraft] Re: Who stole the ionosphere?   Steve Banks
  • [Elecraft] Re: Who stole the ionosphere?   TL
  • [Elecraft] Re: Who stole the ionosphere?   Stuart Rohre
    • [Elecraft] Re: Who stole the ionosphere?   Kevin Rock
      • [Elecraft] Re: Who stole the ionosphere?   Thom LaCosta
      • [Elecraft] Re: Who stole the ionosphere?   Parker Buckley
    • [Elecraft] Re: Who stole the ionosphere?   George, W5YR
      • [Elecraft] Elecraft K-1 vs Icom 703   Northrop Nninem
• [Elecraft] K2/100 mod questions   N2TK, Tony
  • [Elecraft] KAT2 and KPA100 co-exist?   Andrew Moore
    • [Elecraft] KAT2 and KPA100 co-exist?   Jack Shrawder
    • [Elecraft] KAT2 and KPA100 co-exist?   Bruce D. McLaughlin
• [Elecraft] K2 #3538 finished !   Trevor Jacobs
• [Elecraft] Re: External Keyer w/K2   [email protected]
• [Elecraft] The K2 Noise blanker realy works!   Max Moon
  • [Elecraft] The K2 Noise blanker realy works!   Kevin Rock
• [Elecraft] buttons don't work   Andy Bullington
• [Elecraft] KAT100 "real" power rating   KS7J Shack
  • [Elecraft] KAT100 "real" power rating   Vic Rosenthal
• [Elecraft] Realign xtal filter for changed sidetone frequency?   [email protected]
• [Elecraft] Re: Elecraft digest, Vol 4 #191 - 66 msgs   giuliano
• [Elecraft] KAT100 "real" power rating   [email protected]
  • [Elecraft] KAT100 "real" power rating   Bob Lewis (AA4PB)
• [Elecraft] SSB Filter Question   Francis Belliveau
• [Elecraft] Portable battery options   [email protected]
  • [Elecraft] Portable battery options   Joe P
    • [Elecraft] Portable battery options   Harry Yingst
      • [Elecraft] Working around missing parts (was Portable battery options)   Joe P
  • [Elecraft] Portable battery options   Dave
    • [Elecraft] Portable battery options   Phil Wheeler
• [Elecraft] Spectrogram   Joseph Wiedeman
  • [Elecraft] Spectrogram   David A. Belsley
    • [Elecraft] Spectrogram   Roy Vickers
    • [Elecraft] Spectrogram   Edward Kenworthy
  • [Elecraft] Spectrogram   Kenneth E. Harker
  • [Elecraft] Spectrogram   Bruce D. McLaughlin
• [Elecraft] CW Elecraft net ?   Kevin Rock
  • [Elecraft] CW Elecraft net ?   Daniel Reynolds
    • [Elecraft] CW Elecraft net ?   Kevin Rock
• [PMX:##] RE: [Elecraft] KAT2 and KPA100 co-exist?   Wallace, Andy
• [Elecraft] Portable battery options   Mike
• [Elecraft] Re: Elecraft digest   [email protected]
• [Elecraft] NB option   pfb
  • [Elecraft] NB option   Harry Yingst
• [Elecraft] a Brag... K6III 1st place in QRP Sparton Sprint   Jerry Bliss
• [Elecraft] DXpedition pack   [email protected]
  • [Elecraft] DXpedition pack   Hank Kohl K8DD
    • [Elecraft] DXpedition pack   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] DXpedition pack   Phil Wheeler
• [Elecraft] a Brag... K6III 1st place in QRP Sparton Sprint   Jerry Bliss
  • [Elecraft] a Brag... K6III 1st place in QRP Sparton Sprint   Bob Tellefsen
• [Elecraft] spectrogram   Joseph Wiedeman
• [Elecraft] a Brag... K6III 1st place in QRP Sparton Sprint   Jerry Bliss
  • [Elecraft] a Brag... K6III 1st place in QRP Sparton Sprint   Steve
• [Elecraft] Solved Problem Noise Blanker - K2 Ser# 3479   pfb
• [Elecraft] Carolina Windom   [email protected]
  • [Elecraft] Carolina Windom   k6xr
• [Elecraft] N2CQ QRP Contest Calendar June 5-30, 2003   Ken Newman
• [Elecraft] Soldering station: WLC100 vs. WTCPT   Leonard, David
• [Elecraft] case for k2   n3drk
  • [Elecraft] case for k2   Lee Buller
• [Elecraft] 3544 has arrived!   Keith Hamilton
• [Elecraft] Ultimate tuning knob?   Julian (G4ILO)
  • [Elecraft] Ultimate tuning knob?   Eric Swartz WA6HHQ - Elecraft
    • [Elecraft] Ultimate tuning knob?   Bozidar Benc
      • [Elecraft] Ultimate tuning knob?   Robert Parker
      • [Elecraft] Ultimate tuning knob?   Bozidar Benc
      • [Elecraft] Ultimate tuning knob?   Trevor Day
      • [Elecraft] Ultimate tuning knob?   Bozidar Benc
• [Elecraft] Re: K1 Frequency Stability   giuliano
• [Elecraft] KDSP2 Makes K2 a New Radio!   Douglas Westover
• [Elecraft] Temperature   Michael Harris
• [Elecraft] Elecraft CW regional net   Kevin Rock
  • [Elecraft] Elecraft CW regional net   Tom Hammond
    • [Elecraft] Elecraft CW regional net   Mychael Morohovich AA3WF
      • [Elecraft] Elecraft CW regional net   [email protected]
    • [Elecraft] Elecraft CW regional net   Mychael Morohovich AA3WF
  • [Elecraft] Elecraft CW regional net   Vic Rosenthal
    • [Elecraft] Elecraft CW regional net   Kevin Rock
• [Elecraft] kpa100 swr   John Cooper
• [Elecraft] How do I?   Sandy W5TVW
  • [Elecraft] How do I?   David A. Belsley
  • [Elecraft] How do I?   Bob Nielsen
• [Elecraft] Clip RP and IC leads?   Tom, W6WW
  • [Elecraft] Clip RP and IC leads?   Lyle Johnson
  • [Elecraft] Clip RP and IC leads?   Ron D'Eau Claire
• [Elecraft] Random K2 building hints for those starting out   Tom, W6WW
  • [Elecraft] Random K2 building hints for those starting out   Bob - AG5Q
    • [Elecraft] Random K2 building hints for those starting out   f9oj
      • [Elecraft] Random K2 building hints for those starting out   Ron D'Eau Claire
    • [Elecraft] Random K2 building hints for those starting out   Harry Yingst
      • [Elecraft] Random K2 building hints for those starting out   Tom, W6WW
      • [Elecraft] Random K2 building hints for those starting out   Harry Yingst
      • [Elecraft] Random K2 building hints for those starting out   Ron D'Eau Claire
  • [Elecraft] Random K2 building hints for those starting out   Fernando Quinones
    • [Elecraft] Random K2 building hints for those starting out   Ron D'Eau Claire
    • [Elecraft] Random K2 building hints for those starting out   Lawrence Makoski
      • [Elecraft] Random K2 building hints for those starting out   Fernando Quinones
• [Elecraft] tried to go live for the first time   John Cooper
• [Elecraft] KPA100 errata   [email protected]
  • [Elecraft] KPA100 errata   Bob Nielsen
• [Elecraft] Random K2 building hints for those starting out   Joe P
• [Elecraft] A funny thing happened while debugging a friends K2...   Bruce Thompson
• [Elecraft] tried to go live for the first time   Julian (G4ILO)
• [Elecraft] Antenna for K1/K1-4+KAT1   [email protected]
  • [Elecraft] Antenna for K1/K1-4+KAT1   Bob Tellefsen
    • [Elecraft] Antenna for K1/K1-4+KAT1   Vic Rosenthal
  • [Elecraft] Antenna for K1/K1-4+KAT1   Dave
  • [Elecraft] Antenna for K1/K1-4+KAT1   Stuart Rohre
  • [Elecraft] Antenna for K1/K1-4+KAT1   Lawrence Makoski
• FW: [Elecraft] Random K2 building hints for those starting out   Dan Barker
• FW: [Elecraft] Antenna for K1/K1-4+KAT1   Dan Barker
• FW: [Elecraft] Ultimate tuning knob?   Dan Barker
  • [Elecraft] Ultimate tuning knob?   Bozidar Benc
• [Elecraft] Windom Antennas   Roy Vickers
  • [Elecraft] Windom Antennas   Bob Coakley
    • [Elecraft] Windom Antennas   Weymouth Walker
  • [Elecraft] Windom Antennas   Phil Wheeler
  • [Elecraft] Windom Antennas   Ron D'Eau Claire
    • [Elecraft] Windom Antennas   Phil Wheeler
      • [Elecraft] Windom Antennas   Stuart Rohre
      • [Elecraft] Windom Antennas   Ron D'Eau Claire
      • [Elecraft] Windom Antennas   Bob Lewis (AA4PB)
    • [Elecraft] Windom Antennas   Stuart Rohre
  • [Elecraft] Windom Antennas low cost way to make your own as well as IDEZ antenna   Stuart Rohre
• Subject: RE: [Elecraft] Clip relay leads? In praise of toenail clippe   Dave Jewell
• [Elecraft] Windom Antennas   Guy Olinger, K2AV
  • [Elecraft] Windom Antennas   Bob Lewis (AA4PB)
    • [Elecraft] Windom Antennas   Harry Yingst
    • [Elecraft] Windom Antennas - verticals   Harry Yingst
• [Elecraft] Windom Project   Roy Vickers
  • [Elecraft] Windom Project   Stuart Rohre
    • [Elecraft] Windom Project   Roy Vickers
• [Elecraft] K2 Alignment & Test Part II   Crescent Lake
  • [Elecraft] K2 Alignment & Test Part II   Harry Yingst
  • [Elecraft] K2 Alignment & Test Part II   N2TK, Tony
• [Elecraft] K2 mod questions   N2TK, Tony
  • [Elecraft] K2 mod questions   Sverre Holm
• [Elecraft] Ultimate tuning knob?   Bozidar Benc
• [Elecraft] K2 Alignment & Test Part II   RCStimson
  • [Elecraft] K2 Alignment & Test Part II   Tom, W6WW
• [Elecraft] Windom Project   [email protected]
• [Elecraft] Windom Antennas   [email protected]
• [Elecraft] Windom Antennas   Kurt Cramer
  • [Elecraft] Windom Antennas   Phil Wheeler
• [Elecraft] Windom Antennas   Guy Olinger, K2AV
  • [Elecraft] Windom Antennas   George, W5YR
    • [Elecraft] Windom Antennas   David A. Belsley
      • [Elecraft] Windom Antennas   George, W5YR
      • [Elecraft] Windom Antennas   David A. Belsley
    • [Elecraft] Windom Antennas   Lawrence Makoski
    • [Elecraft] Windom Antennas   Guy Olinger, K2AV
• [Elecraft] Random K2 building hints for those starting out   Doug Netherton
• [Elecraft] Windom Antennas   [email protected]
• [Elecraft] bout cb guys   John Cooper
  • [Elecraft] bout cb guys   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] bout cb guys   W2AGN
  • [Elecraft] bout cb guys   David Pratt
  • [Elecraft] bout cb guys   Douglas Westover
• [Elecraft] Windom Antennas   Dave Hottell
• [Elecraft] kpa100 and handkey   John Cooper
  • [Elecraft] kpa100 and handkey   Ron D'Eau Claire
• [Elecraft] Whew! 1st alignment 100%   Jason Hissong
  • [Elecraft] Whew! 1st alignment 100%   Harry Yingst
• [Elecraft] Elecraft Northwest CW Net report   Kevin Rock
• [Elecraft] Elecraft CW Net   Kevin Rock
  • [Elecraft] Elecraft CW Net   Bob Nielsen
• [Elecraft] 2.5 kHz Mod for the KSB2 (link) - Mouser Part #'s   Harry Yingst
  • [Elecraft] 2.5 kHz Mod for the KSB2 (link) - Mouser Part #'s   Dave-KK7SS
    • [Elecraft] 2.5 kHz Mod for the KSB2 (link) - Mouser Part #'s   Harry Yingst
• [Elecraft] How to ring up 10 db worth of miscellaneous losses in a vertical installation.   Guy Olinger, K2AV
• [Elecraft] hot key!   John Cooper
  • [Elecraft] hot key!   Jack Brindle
  • [Elecraft] hot key!   [email protected]
• Fw: [Elecraft] Elecraft Northwest CW Net report   n3drk
• [Elecraft] Hot Key   Rick Dettinger
• [Elecraft] audio mod part help   Indy
  • [Elecraft] audio mod part help   Bob Nielsen
  • [Elecraft] audio mod part help   Sverre Holm
• [Elecraft] 5 MHz band for K2.   Charles Greene
• [Elecraft] ELECRAFT NET: Reminder for Sunday @2000z 17m   Stephen King
  • [Elecraft] ELECRAFT NET: Reminder for Sunday @2000z 17m   Kevin Rock
    • [Elecraft] ELECRAFT NET: Reminder for Sunday @2000z 17m   Daniel Reynolds
      • [Elecraft] ELECRAFT NET: Reminder for Sunday @2000z 17m   Bozidar Benc
• [Elecraft] bout cb guys   [email protected]
• FW: [Elecraft] Ultimate tuning knob?   Julian (G4ILO)
• [Elecraft] Clip RP and IC leads?   Tom, W6WW
• [Elecraft] Windoms - end of thread   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K2 akignment and test, part II   Robert J Greenwalt Jr
  • [Elecraft] K2 akignment and test, part II   Thomas M. Beaudry
    • [Elecraft] K2 akignment and test, part II   Thomas M. Beaudry
• [Elecraft] Kat2 C55?   Martin
• [Elecraft] Telelectronics S54 Scope   Jason Hissong
  • [Elecraft] Telelectronics S54 Scope   David A. Belsley
• [Elecraft] Problem with KLF1-4 Upgrade   Philip Westover
• [Elecraft] I'm too old to remember   Carter W. Craigie
  • [Elecraft] I'm too old to remember   Don Wilhelm
• [Elecraft] Traffic handling, emergency operations, and other defunct modes...   Mychael Morohovich AA3WF
• [Elecraft] Signal generator for K2 alignment & test?   Tom, W6WW
  • [Elecraft] Signal generator for K2 alignment & test?   Sherman Banks
  • [Elecraft] Signal generator for K2 alignment & test?   Bob Tellefsen
• [Elecraft] Re: Who stole the ionosphere?   John
• [Elecraft] 80m propogation   ZL1TW
  • [Elecraft] 80m propogation   Bob Tellefsen
• [Elecraft] tuning problem in K2   [email protected]
  • [Elecraft] tuning problem in K2   Don Wilhelm
• [Elecraft] soldering   [email protected]
  • [Elecraft] soldering   David A. Belsley
  • [Elecraft] soldering   Ron D'Eau Claire
• [Elecraft] Real-Time Clock   pfb
  • [Elecraft] Real-Time Clock   Lyle Johnson
• [Elecraft] #3544 moving along   Keith Hamilton
• [Elecraft] K2 alignment & test, part II, peaking the coils   Tom, W6WW
• [Elecraft] KG4DNI: K1 status problem on 20m: KFL1-4   Daniel L Brinneman
• [Elecraft] K2 conversion kit for 5 Mhz   Charles Greene
• [Elecraft] ksb2 alc query   John Petters G3YPZ
• [Elecraft] working K2   R. Coakley
• [Elecraft] NJQRP Homebrewer Sprint - Awards & Results   Ken Newman
• [Elecraft] K2 alignment & test, part II, peaking the coils   Tom, W6WW
• [Elecraft] Yet another question...   Jason Hissong
  • [Elecraft] Yet another question...   Don Brown
  • [Elecraft] Yet another question...   Bob - AG5Q
• [Elecraft] N3FJP FD Software interface   James C. Hall, MD
• [Elecraft] Low Pass Filters (17m)   David Walker
• [Elecraft] Green and white wire in KSB2 Option   Harry Yingst
  • [Elecraft] KNB2 great job!   Wolf-Ruediger Juergens
• [Elecraft] WTB: pre-built KAT100 (myK2/100 is coming home :-)   [email protected]
• [Elecraft] KAT100 tuner builder found - thanks for replies   [email protected]
• [Elecraft] N3FJP FD Software interface   Julian (G4ILO)
• [Elecraft] RE: Signal generator for K2 alignment & test?   John R. Lonigro
  • [Elecraft] RE: Signal generator for K2 alignment & test?   David A. Belsley
• [Elecraft] KG4DNI: K1 status problem on 20m: KFL1-4   Wallace, Andy
• [Elecraft] end of thread   Ron Chambers
  • [Elecraft] end of thread   [email protected]
• [Elecraft] Earthlink ISP problems with email lists   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] Earthlink ISP problems with email lists   Jack Brindle
    • [Elecraft] Earthlink ISP problems with email lists   Timothy A. Raymer
• [Elecraft] Improve your CW on GTN   Carter, William
  • [Elecraft] Improve your CW on GTN   Thomas M. Beaudry
• [Elecraft] Solder Stations for sale   Meier, Peter H.
  • [Elecraft] What K2 power out at 16 amps?   Andrew Moore
    • [Elecraft] What K2 power out at 16 amps?   Ron D'Eau Claire
• [Elecraft] K-2 S/N 3492 RF Board P1   Pat Shaughnessy
  • [Elecraft] K-2 S/N 3492 RF Board P1   Don Brown
  • [Elecraft] K-2 S/N 3492 RF Board P1   Bob - AG5Q
  • [Elecraft] K-2 S/N 3492 RF Board P1   Vic Rosenthal
• [Elecraft] Improve your CW on GTN   Carter, William
• [Elecraft] K-2 S/N 3492 RF Board P1   Pat Shaughnessy
• [Elecraft] Ser#3479   pfb
• [Elecraft] K-2 S/N 3492 RF Board P1   Pat Shaughnessy
• [Elecraft] KAT100   pfb
  • [Elecraft] KAT100   Ken Wagner
    • [Elecraft] KAT100   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K-2 Panels   Pat Shaughnessy
  • [Elecraft] K-2 Panels   Tom, W6WW
    • [Elecraft] K-1 vs Icom IC-703 -- More tests   Northrop Nninem
    • [Elecraft] K-2 Panels   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] ELECRAFT NET: Thanks!   Stephen King
• [Elecraft] Optical Emcoder problem   Keith Hamilton
• [Elecraft] K2 Mods before building KPA-100   George Winship
  • [Elecraft] K2 Mods before building KPA-100   Ron D'Eau Claire
• [Elecraft] Yet another question...thx   Jason Hissong
• [Elecraft] Re: KG4DNI: K1 status problem on 20m: KFL1-4 !!!FIXED!!!   Daniel L Brinneman
• [Elecraft] Optical Encoder problem found   Keith Hamilton
• [Elecraft] What is "good quality coax"   [email protected]
  • [Elecraft] What is "good quality coax"   Leo Starrenburg PA5LS
    • [Elecraft] What is "good quality coax"   Haines Brown
      • [Elecraft] What is "good quality coax"   Leo Starrenburg PA5LS
      • [Elecraft] What is "good quality coax"   Haines Brown
      • [Elecraft] What is "good quality coax"   Stuart Rohre
  • [Elecraft] What is "good quality coax"   Edward Kenworthy
    • [Elecraft] What is "good quality coax"   N2TK, Tony
  • [Elecraft] What is "good quality coax"   Don Wilhelm
  • [Elecraft] What is "good quality coax"   Stuart Rohre
    • [Elecraft] Coax Test Question   Francis Belliveau
      • [Elecraft] Coax Test Question   N2TK, Tony
      • [Elecraft] Coax Test Question   George, W5YR
  • [Elecraft] Re: "good quality coax," important? depends   Indy
  • [Elecraft] Re: "good quality coax," important? depends   Indy
  • [Elecraft] Re: "good quality coax," important? depends   Indy
  • [Elecraft] Re: "good quality coax," important? depends   Indy
• [Elecraft] What is "good quality coax"   Fletcher, Paul
• [Elecraft] Announcement: K2Net v 0.4   Julian (G4ILO)
• [Elecraft] Power Supply   Mark Baugh
  • [Elecraft] Power Supply   Mike Bowles
  • [Elecraft] Power Supply   Jack Brindle
    • [Elecraft] Power Supply   Ron D'Eau Claire
• [Elecraft] FOR SALE: Bench Power Supply   Elliott Lawrence
• [Elecraft] s meter led not working   Keith Hamilton
  • [Elecraft] s meter led not working   Harry Yingst
• [Elecraft] OT K2 Trivia - another new product ?   Vic Winton
  • [Elecraft] OT K2 Trivia - another new product ?   Buddy Brannan
    • [Elecraft] OT K2 Trivia - another new product ?   Phil Wheeler
      • [Elecraft] OT K2 Trivia - another new product ?   Buddy Brannan
      • [Elecraft] OT K2 Trivia - END OF THREAD   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] OT K2 Trivia - another new product ?   Tom Hammond
    • [Elecraft] OT K2 Trivia - another new product ?   Dave-KK7SS
    • [Elecraft] Ya' see - another reason the K2/100 is on its way home!   [email protected]
• [Elecraft] F.S. Elecraft K1-4 QRP transceiver   Joe W2KJ
• [Elecraft] OT K2 Trivia - another new product ?   [email protected]
  • [Elecraft] OT K2 Trivia - another new product ?   Harry Yingst
  • [Elecraft] OT K2 Trivia - another new product ?   Vic Rosenthal
• [Elecraft] OT K2 Trivia - another new product ?   [email protected]
  • [Elecraft] OT K2 Trivia - another new product ?   Jack Brindle
• [Elecraft] FS K2   Dan A. Kolean
• [Elecraft] For Sale K2   Dan A. Kolean
• [Elecraft] OT K2 Trivia - another new product ?   [email protected]
• [Elecraft] K2 SOLD   Dan A. Kolean
• [Elecraft] OT K2 Trivia - another new product ?   Jeff Stai WK6I
  • [Elecraft] OT K2 Trivia - another new product ?   Kevin Rock
    • [Elecraft] OT K2 Trivia - another new product ?   Thom LaCosta
      • [Elecraft] OT K2 Trivia - another new product ?   Randy Moore
• [Elecraft] Any NEW Screen Saver for K2???   Rick Tilton
• [Elecraft] KDSP2 problem   N2TK, Tony
  • [Elecraft] KDSP2 problem   Lyle Johnson
• [Elecraft] Almost as much fun as building it myself   George Winship
• [Elecraft] k2 and Icom sm-6 mic   james conrad
• [Elecraft] K2 Alignment Sequence:   Martin AC6RM
  • [Elecraft] K2 Alignment Sequence:   Dave
  • [Elecraft] K2 Alignment Sequence:   Kevin Cozens
  • [Elecraft] K2 Alignment Sequence:   Don Wilhelm
    • [Elecraft] K2 Alignment Sequence:   John R. Lonigro
    • [Elecraft] K2 Alignment Sequence:   Joe P
      • [Elecraft] K2 Alignment Sequence:   Don Wilhelm
      • [Elecraft] K2 Alignment Sequence:   Tom Hammond
• [Elecraft] k2 and Icom sm-6 mic   Eddy Avila
• [Elecraft] Design reasons for X7-X11 case soldering   Jason Hissong
  • [Elecraft] Design reasons for X7-X11 case soldering   George, W5YR
    • [Elecraft] Design reasons for X7-X11 case soldering   Harry Yingst
      • [Elecraft] Design reasons for X7-X11 case soldering   Stuart Rohre
      • [Elecraft] Design reasons for X7-X11 case soldering   Tom, W6WW
      • [Elecraft] Design reasons for X7-X11 case soldering   Harry Yingst
      • [Elecraft] Design reasons for X7-X11 case soldering   Tom, W6WW
      • [Elecraft] Design reasons for X7-X11 case soldering   Stuart Rohre
      • [Elecraft] Design reasons for X7-X11 case soldering   Ken Wagner
      • [Elecraft] Design reasons for X7-X11 case soldering   Fernando Quinones
      • [Elecraft] Design reasons for X7-X11 case soldering   Ken Wagner
      • [Elecraft] Design reasons for X7-X11 case soldering   Stuart Rohre
  • [Elecraft] Design reasons for X7-X11 case soldering   N2TK, Tony
    • [Elecraft] Design reasons for X7-X11 case soldering   Tom Hammond
• [Elecraft] WB6TMY/6M now mobile on 40 Meters   W B Reese
• [Elecraft] Coax Test Question   [email protected]
• [Elecraft] Woo Hoo! K2 3490 is on the air.   Joe P
• [Elecraft] What is "good quality coax"   Martin
• [Elecraft] What is "good quality coax"   Martin
• [Elecraft] Good quality coax   [email protected]
  • [Elecraft] Good quality coax   Ron D'Eau Claire
• [Elecraft] Elecraft Power point presentation   ZL1TW
• [Elecraft] DSP user update?   [email protected]
  • [Elecraft] DSP user update?   Bozidar Benc
• [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
  • [Elecraft] K2 and the KPA100 Power Fluxuates?   Tom Hammond
    • [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Tom Hammond
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Michael Harris
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Ron D'Eau Claire
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
      • [Elecraft] K2 and the KPA100 Power Fluxuates?   Dale Boresz
• [Elecraft] Off Topic - Ham Radio Oulets in Schenectady NY   [email protected]
  • [Elecraft] Off Topic - Ham Radio Oulets in NYC   Val
    • [Elecraft] Off Topic - Ham Radio Oulets in NYC   Andrey Stoev
    • [Elecraft] Off Topic - Ham Radio Oulets in NYC   rich a.
      • [Elecraft] Off Topic - Ham Radio Oulets in NYC   rich a.
• [Elecraft] OT K2 Trivia   Ira Saber
• [Elecraft] K1 Unsoldered Connectors   Jack Zielke
  • [Elecraft] K1 Unsoldered Connectors   la1pha
• [Elecraft] french K1 builders   Eric Charikane
• [Elecraft] Building experience   Earla Loomis
• [Elecraft] K2/100 & Kat100 in a box/pouch   James C. Hall, MD
• [Elecraft] Noise Generator and KSB2   Dan Copeland
• [Elecraft] Ser#3479   pfb
  • [Elecraft] Ser#3479   Hank Kohl K8DD
    • [Elecraft] Ser#3479   k4zm
• [Elecraft] K2 Pictures needed ASAP Please   Daniel L Brinneman
• [Elecraft] K2 Alignment Sequence:   [email protected]
• [Elecraft] K2 and the KPA100 Power Fluxuates?   Harry Yingst
  • [Elecraft] K2/100 Power Fluctuatations   Brian Machesney
• [Elecraft] k2 case screws   Gary Lee
  • [Elecraft] k2 case screws   Bob Nielsen
• [Elecraft] sidetone is lost   John Veach
  • [Elecraft] sidetone is lost   k4zm
  • [Elecraft] sidetone is lost   k4zm
• [Elecraft] K2 S/N 3527 Up and running   Baker
• [Elecraft] K2 #3555 Arrived Tuesday!   Dennis Ponsness
• [Elecraft] RE: K2 PLL reference oscillator test failure (Resolution summary)   Harlan Braude
• [Elecraft] VOX wierdness   Deinhardt, Toby
  • [Elecraft] VOX wierdness   la1pha
• [Elecraft] Spam   Dan Barker
  • [Elecraft] Spam   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K2 Alignment Sequence:   Gil Stacy
  • [Elecraft] K2 Alignment Sequence:   David A. Belsley
• [Elecraft] N2CQ QRP Contest Calendar June 12-30, 2003   Ken Newman
• [Elecraft] QSK - did something change?   g3pjt
  • [Elecraft] QSK - did something change?   Sam Binkley
  • [Elecraft] QSK - did something change?   Philip L Carter
  • [Elecraft] QSK - did something change?   David A. Belsley
• [Elecraft] QSK - did something change?   Julian (G4ILO)
• [Elecraft] question on Heil hand mics for K2   Curt Kolovson
  • [Elecraft] question on Heil hand mics for K2   Harry Yingst
  • [Elecraft] question on Heil hand mics for K2   Francis Belliveau
    • [Elecraft] question on Heil hand mics for K2   Brendan Minish
      • [Elecraft] question on Heil hand mics for K2   Bill NY9H
      • [Elecraft] keying circuit differences between K1 and K2   Andrew Moore
      • [Elecraft] keying circuit differences between K1 and K2   k4zm
      • [Elecraft] keying circuit differences between K1 and K2   Andrew Moore
• [Elecraft] BFO Test Results Range Question   Harlan Braude
• [Elecraft] Responses I received re DSP module   [email protected]
• [Elecraft] Elecraft award rules relaxed a bit   Jerry Bliss
• [Elecraft] kpa100 reciever   John Cooper
• [Elecraft] kpa100 reciever   Andrey Stoev
• [Elecraft] QSK - did something change?   Don Rasmussen
• [Elecraft] KDSP2 Anomolies   [email protected]
  • [Elecraft] KDSP2 Anomolies   Lyle Johnson
• [Elecraft] Upcoming Vacation and my K2   Jason Hissong
  • [Elecraft] Upcoming Vacation and my K2   Doug Faunt N6TQS +1-510-655-8604
    • [Elecraft] Upcoming Vacation and my K2   rich a.
    • [Elecraft] Upcoming Vacation and my K2   Haines Brown
      • [Elecraft] Upcoming Vacation and my K2   rich a.
      • [Elecraft] Upcoming Vacation and my K2   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] Upcoming Vacation and my K2   Tom Hammond
      • [Elecraft] Upcoming Vacation and my K2   Stuart Rohre
  • [Elecraft] Upcoming Vacation and my K2   Jack Brindle
  • [Elecraft] Upcoming Vacation and my K2   Robert Parker
  • [Elecraft] Upcoming Vacation and my K2   Francis Belliveau
  • [Elecraft] Upcoming Vacation and my K2   [email protected]
    • [Elecraft] Upcoming Vacation and my K2   Buddy Brannan
      • [Elecraft] Upcoming Vacation and my K2   Haines Brown
  • [Elecraft] Upcoming Vacation and my K2   [email protected]
• [Elecraft] Upcoming Vacation and my K2   Deinhardt, Toby
  • [Elecraft] Upcoming Vacation and my K2   Haines Brown
    • [Elecraft] Proposed new Visa TV ad featuring the Elecraft K-1   Northrop Nninem
    • [Elecraft] Upcoming Vacation and my K2   rich a.
    • [Elecraft] Upcoming Vacation and my K2   Fernando Quinones
      • [Elecraft] Upcoming Vacation and my K2   Jason Hissong
      • [Elecraft] Upcoming Vacation and my K2   Eric Swartz WA6HHQ - Elecraft
    • [Elecraft] Upcoming Vacation and my K2   Paul Ermisch
      • [Elecraft] Upcoming Vacation and my K2   Dave
  • [Elecraft] Upcoming Vacation and my K2   Bob Nielsen
  • [Elecraft] telescoping poles   Stuart Rohre
• [Elecraft] KeyJack problems?....   Wayne K9DI
  • [Elecraft] KeyJack problems?....   Charles Bland
  • [Elecraft] KeyJack problems?....   Francis Belliveau
• [Elecraft] VOX wierdness   Deinhardt, Toby
• [Elecraft] Good quality coax   [email protected]
  • [Elecraft] Good quality coax   George, W5YR
• [Elecraft] ELECRAFT NET: Test Suggestion 2200z on 20m   Stephen King
• [Elecraft] W2 ham stores, sorry O-T   Steve Jackson
• [Elecraft] sidetone   John Veach
• [Elecraft] Re: Elecraft digest, Vol 4 #201 - 42 msgs   [email protected]
• [Elecraft] K2 and the KPA100 Power Fluxuates - Follow up   Harry Yingst
  • [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Michael Harris
    • [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Harry Yingst
• [Elecraft] Proposed new Visa TV ad featuring the Elecraft K-1   Wallace, Andy
• [Elecraft] Re: Elecraft digest, Vol 4 #201 - 42 msgs   [email protected]
• [Elecraft] IC pins at control socket U6   [email protected]
• [Elecraft] Control board P4 connector   [email protected]
  • [Elecraft] Control board P4 connector   John R. Lonigro
• [Elecraft] Upcoming Vacation and my K2   [email protected]
• [Elecraft] S&S Engineering/ ARK 40 series   Roy Crosier
• [Elecraft] KDSP2 versus KNB2   Michael van Hauten
  • [Elecraft] KDSP2 versus KNB2   Lyle Johnson
  • [Elecraft] KDSP2 versus KNB2   Phil Wheeler
• [Elecraft] Ext. Speaker   Mark Baugh
  • [Elecraft] Ext. Speaker   Brendan Minish
    • [Elecraft] Ext. Speaker   Bill NY9H
      • [Elecraft] Ext. Speaker   k6xr
      • [Elecraft] Ext. Speaker   Dave-KK7SS
      • [Elecraft] Ext. Speaker   Brendan Minish
  • [Elecraft] Ext. Speaker   Bob Tellefsen
    • [Elecraft] Ext. Speaker   Jack Brindle
• [Elecraft] FT100 Knob Arrives   [email protected]
  • [Elecraft] FT100 Knob Arrives   David Pratt
    • [Elecraft] FT100 Knob Arrives   Stuart Rohre
• [Elecraft] FT100 Knob Arrives   Eddy Avila
  • [Elecraft] FT100 Knob Arrives   Donald Wilhelm
    • [Elecraft] K2 sn3552 just arrived - question about rev 2 firmware   Edward Kenworthy
      • [Elecraft] K2 sn3552 just arrived - question about rev 2 firmware   Bob Nielsen
      • [Elecraft] K2 sn3552 just arrived - question about rev 2 firmware   Edward Kenworthy
  • [Elecraft] FT100 Knob Arrives   Randy Moore
• [Elecraft] Control board Q1, Q2 collector   [email protected]
  • [Elecraft] Control board Q1, Q2 collector   Harry Yingst
    • [Elecraft] Control board Q1, Q2 collector   Dale Boresz
  • [Elecraft] Control board Q1, Q2 collector   David A. Belsley
• [Elecraft] K2/KPA100 lockup   Ken Kaplan
  • [Elecraft] K2/KPA100 lockup   Ken Wagner
• [Elecraft] K2 and K2/100 Pictures needed   Daniel L Brinneman
• [Elecraft] Elecraft awards.   Mike
• [Elecraft] ELECRAFT NET   Kevin Rock
• [Elecraft] Ham-Com/ARRL Nation Convention - June 20-22   [email protected]
  • [Elecraft] Ham-Com/ARRL Nation Convention - June 20-22   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] Ham-Com/ARRL Nation Convention - June 20-22   Don Brown
• [Elecraft] re: picture of FT100 knob on K2   Ken Hopper N9VV
• [Elecraft] 60 meter options with K2   [email protected]
  • [Elecraft] 60 meter options with K2   David Pratt
• [Elecraft] woodpecker   John Veach
  • [Elecraft] woodpecker   Dave
  • [Elecraft] woodpecker   Jack Brindle
  • [Elecraft] woodpecker   Bruce D. McLaughlin
• [Elecraft] CW Zero-Beat Indicator   Dan Copeland
  • [Elecraft] CW Zero-Beat Indicator   David Pratt
    • [Elecraft] CW Zero-Beat Indicator   Sverre Holm
  • [Elecraft] K2 - parts missing ? Extra parts ?   Edward Kenworthy
    • [Elecraft] K2 - parts missing ? Extra parts ?   Bob Nielsen
      • [Elecraft] K2 - parts missing ? Extra parts ?   Francis Belliveau
      • [Elecraft] K2 - parts missing ? Extra parts ?   Edward Kenworthy
• [Elecraft] KDSP@ Anomalies   [email protected]
• [Elecraft] KPA 100 assembly question   N2TK, Tony
• [Elecraft] ELECRAFT NET: TEST SUNDAY 2200z on 14330   Stephen King
• [Elecraft] K1 on 160M   Steven Connors
  • [Elecraft] K1 on 160M   Dave
• [Elecraft] K2 akignment and test, part II - solved!   Robert J Greenwalt Jr
  • [Elecraft] K2 akignment and test, part II - solved!   Tom, W6WW
    • [Elecraft] K2 akignment and test, part II - solved!   Bob Nielsen
      • [Elecraft] K2 akignment and test, part II - solved!   Lawrence Makoski
      • [Elecraft] K2 akignment and test, part II - solved!   Tom Hammond
• [Elecraft] Is my K2 XMIT Current High?   Brian Wruble
  • [Elecraft] Is my K2 XMIT Current High?   Bob - AG5Q
  • [Elecraft] Is my K2 XMIT Current High?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] 5V & 8V?   Tom, W6WW
• [Elecraft] FT100 knobs (again)   Trevor Day
• [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Tom, W6WW
  • [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Harry Yingst
    • [Elecraft] CAL FIL / BFO setup with sound card?   Andrew Moore
      • [Elecraft] CAL FIL / BFO setup with sound card?   Tom Hammond
      • [Elecraft] CAL FIL / BFO setup with sound card?   Vic Rosenthal
    • [Elecraft] K2 fan turns on high with CW QSO 22 watts   Andrew Moore
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Wayne Burdick
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Andrew Moore
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Ken Wagner
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Harry Yingst
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Wayne Burdick
      • [Elecraft] K2 fan turns on high with CW QSO 22 watts   Michael Harris
      • [Elecraft] Re: K2 fan turns on high with CW QSO 22 watts   Wayne Burdick
  • [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Tom, W6WW
• [Elecraft] info 232 ON 160M Calibration   Brian Wruble
  • [Elecraft] info 232 ON 160M Calibration   Don Brown
• [Elecraft] ksb2 problem   [email protected]
• [Elecraft] Down East Microwave Transverter and pre amp for sale   Glenn Maclean
• [Elecraft] solar panels   n3drk
  • [Elecraft] solar panels   [email protected]
• [Elecraft] Elecraft net   Kevin Rock
• [Elecraft] K2 damage   Kevin Rock
  • [Elecraft] K2 damage   Phil Wheeler
  • [Elecraft] K2 damage   Peter Zenker
• [Elecraft] mic up/dn/func on K2   Stephen Pearce
  • [Elecraft] mic up/dn/func on K2   Sverre Holm
• [Elecraft] K2 Low Sensitivity on some bands   Chris
  • [Elecraft] K2 Low Sensitivity on some bands   Dave
  • [Elecraft] K2 Low Sensitivity on some bands   Bruce D. McLaughlin
    • [Elecraft] K2 Low Sensitivity on some bands   Buddy Brannan
• [Elecraft] 100 K1's logged - FINALLY!   Jerry Bliss
• [Elecraft] found -- CAL FIL / BFO setup with sound card?   Andrew Moore
• [Elecraft] Where to find ?   Lawrence Makoski
  • [Elecraft] Where to find ?   Bruce D. McLaughlin
• [Elecraft] QSL Cards   Thomas Brereton
  • [Elecraft] Re: QSL Cards   Randy Moore
• [Elecraft] Where to find ?   Clark L. Stewart
• [Elecraft] Some reassurance needed please.   Kenworthy, Edward (EDS)
  • [Elecraft] Some reassurance needed please.   John R. Lonigro
  • [Elecraft] Some reassurance needed please.   Bob - AG5Q
    • [Elecraft] Some reassurance needed please.   Ron D'Eau Claire
• [Elecraft] Remote Operation of a K2   Trevor Day
• [Elecraft] Some reassurance needed please.   Wallace, Andy
• [Elecraft] Ring Solders   Keisuke Shimizu
• [Elecraft] FT100 knobs (again)   Neill Taylor
  • [Elecraft] FT100 knobs (again)   Trevor Day
• [Elecraft] test post   Steve
• [Elecraft] re: picture of FT100 knob on K2   Andrey Stoev
• [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Eddy Avila
  • [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] solar panels   [email protected]
  • [Elecraft] solar panels   Don Brown
• [Elecraft] Some reassurance needed please.   Tom Hammond
• [Elecraft] K2 Low Battery Warning   Dave Sergeant
• [Elecraft] Voltage Readout   K8RS - RCStimson
  • [Elecraft] Voltage Readout   Ron D'Eau Claire
  • [Elecraft] Voltage Readout   John R. Lonigro
• [Elecraft] LCD diffuser and LCD protective backing   [email protected]
• [Elecraft] HamCom TX booth help?   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] HamCom TX booth help?   Bud Rogers
• [Elecraft] K2 and the KPA100 Power Fluctuation - Another Follow up   james conrad
• [Elecraft] New Elecraft books page - "The Complete DX'er"   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KPA100 internal shielding improved, manual updated   Wayne Burdick
  • [Elecraft] KPA100 internal shielding improved, manual updated   Dale Boresz
    • [Elecraft] Re: KPA100 internal shielding improved, manual updated   Wayne Burdick
• [Elecraft] KAT2 manual suggestion (R6)   Joe P
• [Elecraft] Resistor Pack Question....   Dennis Ponsness
  • [Elecraft] Resistor Pack Question....   Bob - AG5Q
• [Elecraft] K2 - KIO2 connected under power - now it is dead   Andreas KU7T
  • [Elecraft] K2 - KIO2 connected under power - now it is dead   Charles Bland
  • [Elecraft] K2 - KIO2 connected under power - now it is dead   Andreas KU7T
    • [Elecraft] K2 - KIO2 connected under power - now it is dead   Dale Boresz
• [Elecraft] eagerly awaiting in depth information on the transverters   Deinhardt, Toby
• [Elecraft] Re: Elecraft digest, Vol 4 #205 - 42 msgs   Dave Jewell
• [Elecraft] Re: Elecraft digest, Vol 4 #205 - 42 msgs   Dave Jewell
  • [Elecraft] Re: Elecraft digest, Vol 4 #205 - 42 msgs   Gregg R. Lengling
  • [Elecraft] Re: Elecraft digest, Vol 4 #205 - 42 msgs   Harry Yingst
• [Elecraft] A couple more questions (toroids and soldering)   Kenworthy, Edward (EDS)
  • [Elecraft] A couple more questions (toroids and soldering)   Mychael Morohovich AA3WF
    • [Elecraft] A couple more questions (toroids and soldering)   Timothy A. Raymer
  • [Elecraft] A couple more questions (toroids and soldering)   Harry Yingst
    • [Elecraft] A couple more questions (toroids and soldering)   John R. Lonigro
• [Elecraft] K2 - KIO2 connected under power - now it is dead   Dale Boresz
• [Elecraft] RE: KPA 100 assembly question   N2TK, Tony
• [Elecraft] (no subject)   Roy Vickers
• [Elecraft] CC Number   Roy Vickers
  • [Elecraft] CC Number   Philip L Carter
• [Elecraft] KAT2 manual suggestion (R6)   Wallace, Andy
• [Elecraft] CC Number   [email protected]
• [Elecraft] A couple more questions (toroids and soldering)   Tom Hammond
  • [Elecraft] A couple more questions (toroids and soldering)-answers   Stuart Rohre
• [Elecraft] A couple more questions (toroids and soldering)   Kenworthy, Edward (EDS)
• [Elecraft] K1 on 10 meters   Steven Connors
• [Elecraft] OT: Sloper Dipole Question   Charles Bland
  • [Elecraft] OT: Sloper Dipole Question   Northrop Nninem
  • [Elecraft] OT: Sloper Dipole Question   Vic Rosenthal
  • [Elecraft] OT: Sloper Dipole Question   Stuart Rohre
    • [Elecraft] Mineral spirits OK for cleaning boards?   Dave Hottell
      • [Elecraft] Mineral spirits OK for cleaning boards?   Don Brown
      • [Elecraft] Mineral spirits OK for cleaning boards?   Ron D'Eau Claire
      • [Elecraft] Mineral spirits OK for cleaning boards?   kevin schuchmann
      • [Elecraft] Mineral spirits OK for cleaning boards?   Timothy A. Raymer
      • [Elecraft] Mineral spirits OK for cleaning boards?   Lawrence Makoski
• [Elecraft] Diode voltage drop [Was: Re: Elecraft digest, Vol 4 #206 - 27 msgs]   Neill Taylor
  • [Elecraft] Re: Diode voltage drop   Indy
• [Elecraft] W1AWB and K2#3457 on the air...finally!   Andy Bullington
• [Elecraft] K2/100 -RS232 problem   N2TK, Tony
  • [Elecraft] K2/100 -RS232 problem   Philip L Carter
    • [Elecraft] K2/100 -RS232 problem   N2TK, Tony
• [Elecraft] Trip to WI   Trevor Jacobs
• [Elecraft] K2/100 -RS232 problem   Fletcher, Paul
• [Elecraft] Supply voltage and diode drops....   Dave Jewell
  • [Elecraft] Supply voltage and diode drops....   Don Brown
• FW: [Elecraft] K2/100 -RS232 problem   N2TK, Tony
  • FW: [Elecraft] K2/100 -RS232 problem   Eric Swartz WA6HHQ - Elecraft
    • FW: [Elecraft] K2/100 -RS232 problem   N2TK, Tony
• [Elecraft] OT: Sloper Dipole Question   [email protected]
  • [Elecraft] OT: Sloper Dipole Question   Vic Rosenthal
    • [Elecraft] OT: Sloper Dipole Question   Karl
      • [Elecraft] OT: Sloper Dipole Question   Vic Rosenthal
• [Elecraft] K2/100 -RS232 problem   Fletcher, Paul
• [Elecraft] OT: Sloper Dipole Question   Guy Olinger, K2AV
• [Elecraft] RE: Supply voltage and diode drops....   Morrow, Michael A.
• [Elecraft] For Sale - K2 HF Transceiver with options   Harry Yingst
• [Elecraft] OT: Sloper Dipole Question   [email protected]
• [Elecraft] The internal K2 voltmeter and the diode voltage drop   Stuart Rohre
• [Elecraft] OT: Sloper Dipole Question   BlandRanch
  • [Elecraft] OT: Sloper Dipole Question   Ron D'Eau Claire
  • [Elecraft] OT: Sloper Dipole Question   Trevor Day
    • [Elecraft] OT: Sloper Dipole Question   David A. Belsley
  • [Elecraft] OT: Sloper Dipole Question   Francis Belliveau
    • [Elecraft] OT: Sloper Dipole Question   Northrop Nninem
• [Elecraft] Ten-Tec Orion   [email protected]
  • [Elecraft] Ten-Tec Orion   John Buck
  • [Elecraft] Ten-Tec Orion & 2m transverter   John Petters G3YPZ
    • [Elecraft] Re: 2m transverter comparisons   Wayne Burdick
      • [Elecraft] Re: 2m transverter comparisons   John Petters G3YPZ
• [Elecraft] new KPA-100 manual ?   George Winship
  • [Elecraft] new KPA-100 manual ?   Phil Wheeler
• [Elecraft] OT: Sloper Dipole Question   [email protected]
• [Elecraft] Cleaning Boards NOT   Stuart Rohre
  • [Elecraft] Mineral spirits OK for cleaning boards?   Dave Hottell
    • [Elecraft] Mineral spirits OK for cleaning boards?   Don Brown
    • [Elecraft] Mineral spirits OK for cleaning boards?   Tom Hammond
      • [Elecraft] Mineral spirits OK for cleaning boards?   Dave Hottell
      • [Elecraft] Mineral spirits OK for cleaning boards?   Ron D'Eau Claire
      • [Elecraft] Mineral spirits OK for cleaning boards?   Tom Hammond
      • [Elecraft] Mineral spirits OK for cleaning boards?   Harry Yingst
      • SV: [Elecraft] Mineral spirits OK for cleaning boards?   rolf heidenborg
    • [Elecraft] Mineral spirits OK for cleaning boards?   Stuart Rohre
• [Elecraft] OT: Sloper Dipole Question   Len Koppl
  • [Elecraft] OT: Sloper Dipole Question   Stuart Rohre
• [Elecraft] Good News and Bad   K8RS - RCStimson
  • [Elecraft] Good News and Bad   Vic Rosenthal
• [Elecraft] #2029 back home and running!!   [email protected]
• [Elecraft] Keeping the battery charged   Charles Bland
  • [Elecraft] Keeping the battery charged   David Pratt
  • [Elecraft] Keeping the battery charged   Francis Belliveau
    • [Elecraft] Keeping the battery charged   George, W5YR
      • [Elecraft] Keeping the battery charged   Charles Bland
      • [Elecraft] Keeping the battery charged   Bob Nielsen
      • [Elecraft] Keeping the battery charged   Bob Lewis (AA4PB)
      • [Elecraft] K4WTF first harmonic has been detected...   [email protected]
      • [Elecraft] K4WTF first harmonic has been detected...   Bob Tellefsen
      • [Elecraft] K4WTF first harmonic has been detected...   Trevor Day
      • [Elecraft] Keeping the battery charged   Bob Lewis (AA4PB)
      • [Elecraft] Keeping the battery charged   Don Wilhelm
• [Elecraft] Remote Operation of a K2   Julian (G4ILO)
• [Elecraft] re: good news and bad   Andy Bullington
• [Elecraft] Sale on building supplies tools   Greg Beat
  • [Elecraft] Sale on building supplies tools   Tom Hammond
    • [Elecraft] Sale on building supplies tools   Bob Nielsen
• FW: [Elecraft] Mineral spirits OK for cleaning boards?   Dan Barker
  • FW: [Elecraft] Mineral spirits OK for cleaning boards?   Harry Yingst
• [Elecraft] 80 mtr FD antenna ideas?   Indy
  • [Elecraft] 80 mtr FD antenna ideas?   Lee Buller
    • [Elecraft] 80 mtr FD antenna ideas?   Stuart Rohre
  • [Elecraft] 80 mtr FD antenna ideas?   Stuart Rohre
• [Elecraft] 80 mtr FD antenna ideas?   [email protected]
• [Elecraft] K2 internal speaker dead   [email protected]
  • [Elecraft] K2 internal speaker dead   Gregg R. Lengling
  • [Elecraft] K2 internal speaker dead   Kenneth E. Harker
  • [Elecraft] K2 internal speaker dead   David A. Belsley
  • [Elecraft] K2 internal speaker dead   Don Wilhelm
• [Elecraft] Slightly OT-5 Mcs. Antenna requirements...   Rodenbarger, John A.
  • [Elecraft] Slightly OT-5 Mcs. Antenna requirements...   Daniel Reynolds
    • [Elecraft] Slightly OT-5 Mcs. Antenna requirements...   Thomas Beaudry
• [Elecraft] Fully assembled and tested KAT100 ATU to match a K2/100 needed!!   Daniel L Brinneman
• [Elecraft] palm radio paddle   n3drk
  • [Elecraft] palm radio paddle   Dave
  • [Elecraft] palm radio paddle   David A. Belsley
  • [Elecraft] palm radio paddle   Timothy A. Raymer
    • [Elecraft] palm radio paddle   Steve
  • [Elecraft] palm radio paddle   Daniel Reynolds
  • [Elecraft] palm radio paddle   Francis Belliveau
• [Elecraft] palm radio paddle   [email protected]
• [Elecraft] OT: cleaning air variable capacitors?   [email protected]
• [Elecraft] K1 and Palm Paddle   Rick Dettinger
  • [Elecraft] K1 and Palm Paddle   [email protected]
• [Elecraft] Slightly OT-5 Mcs. Antenna requirements...   Thomas Beaudry
• [Elecraft] getting bored... and NO THIS HAS NOTHING TO DO WITH ELECRAFT!!!!!!!!   Daniel L Brinneman
  • [Elecraft] getting bored... and NO THIS HAS NOTHING TO DO WITH ELECRAFT!!!!!!!!   Walter D. Amos
• [Elecraft] Diode voltage drop   Dave Jewell
• [Elecraft] Ten-Tec Orion   Dave Jewell
• [Elecraft] Ten-Tec Orion   Charles Greene
• [Elecraft] Suggestions needed   [email protected]
  • [Elecraft] Off Topic - Help with Healtkit   [email protected]
    • [Elecraft] Off Topic - Help with Healtkit   Bruce D. McLaughlin
  • [Elecraft] Suggestions needed   Bruce D. McLaughlin
• [Elecraft] Solvent Comparison Chart: Minearal Spirits   Stuart Rohre
• [Elecraft] Anticlimb device for towers   Gregg R. Lengling
  • [Elecraft] Anticlimb device for towers   Vic Rosenthal
• [Elecraft] HP48GX to KIO2   Jeff Burns
  • [Elecraft] HP48GX to KIO2   Philip L Carter
  • [Elecraft] HP48GX to KIO2   Rich Lentz
• [Elecraft] Mineral spirits OK for cleaning boards?   Gary L Surrency
• [Elecraft] PLL Reference Range...   Jason Hissong
  • [Elecraft] PLL Reference Range...   Ken Wagner
    • [Elecraft] PLL Reference Range...   Jason Hissong
      • [Elecraft] PLL Reference Range...   Lyle Johnson
      • [Elecraft] K2 Absolute max RX levels?   Brendan Minish
      • [Elecraft] TRANSVERTER QUESTION   David Schornak
      • [Elecraft] TRANSVERTER QUESTION   Robert Friess
      • [Elecraft] TRANSVERTER QUESTION   Harry Yingst
      • [Elecraft] TRANSVERTER QUESTION   Kenneth E. Harker
  • [Elecraft] PLL Reference Range...   Ken Wagner
    • [Elecraft] PLL Reference Range...   Jason Hissong
• [Elecraft] Wireless network configuration (RE: Elecraft digest, Vol 4 #208 - 68 msgs)   Kenworthy, Edward (EDS)
• [Elecraft] Flux cleaning solvents   Dave Sergeant
• [Elecraft] Mini-paddle magnets   Martin
• FW: [Elecraft] HP48GX to KIO2   Dan Barker
• [Elecraft] Re: Mini-paddle magnets   Martin
  • [Elecraft] Re: Mini-paddle magnets   John J. McDonough
    • [Elecraft] KPA100 shield kit tip   Philip L Carter
      • [Elecraft] Re: KPA100 shield kit tip   Wayne Burdick
      • [Elecraft] Re: KPA100 shield kit tip   Harry Yingst
      • [Elecraft] KPA100 shield kit tip   Tom Hammond
    • [Elecraft] Re: Mini-paddle magnets   Guy Olinger, K2AV
  • [Elecraft] Re: Mini-paddle magnets   Timothy A. Raymer
    • [Elecraft] Re: Mini-paddle magnets   Jessie Oberreuter
• [Elecraft] 80 m FD antenna   Indy
• [Elecraft] For Sale: K2 HF Transceiver with options (last chance before I post it on ebay)   Harry Yingst
• [Elecraft] HP48GX to KIO2   [email protected]
• [Elecraft] Off Topic Help with Heathkit   Allen Ward
• [Elecraft] Please help-K2 Suddenly Dead   Tom Mc
• [Elecraft] solvents   [email protected]
• [Elecraft] For Sale: K2 HF Transceiver with options (last chance before I...   Harry Yingst
• [Elecraft] Filter loss on SSB   Baker
• [Elecraft] Kids Day   Charles Bland
• [Elecraft] Re: KPA100 shield kit tip   Gary L Surrency
  • [Elecraft] Re: KPA100 shield kit tip   Harry Yingst
• [Elecraft] (Elecraft) Suggestions needed   Robert C. Abell
• [Elecraft] Dead K2 - Could it be the MCU??   Tom Mc
• [Elecraft] K2 #2172 is now a 3000+ but...   Kevin Cozens
• [Elecraft] SSB filter loss   Baker
• [Elecraft] Filter loss   Stewart Baker
  • [Elecraft] Filter loss   Don Wilhelm
  • [Elecraft] Filter loss   Tom Hammond
• [Elecraft] HELP! After MODS no output 15/17 meters   George Winship
• [Elecraft] Re:( Elecraft) suggestions needed   Robert C. Abell
• [Elecraft] DSP Unit Completed   Sherman Banks
• [Elecraft] OT: Sloper Dipole Question   Len Koppl
  • [Elecraft] OT: Sloper Dipole Question   Charles Bland
    • [Elecraft] OT: Sloper Dipole Question   Ron D'Eau Claire
    • [Elecraft] OT: Sloper Dipole Question   Stuart Rohre
      • [Elecraft] OT: Sloper Dipole Question   George, W5YR
      • [Elecraft] OT: Sloper Dipole Question   Hank Kohl K8DD
      • [Elecraft] OT: Sloper Dipole Question   Stuart Rohre
  • [Elecraft] OT: Sloper Dipole Question   Stuart Rohre
• [Elecraft] #3475 100% on Test and Alignment II   Jason Hissong
  • [Elecraft] #3475 100% on Test and Alignment II   Kevin Rock
  • [Elecraft] #3475 100% on Test and Alignment II   Dave
  • [Elecraft] #3475 100% on Test and Alignment II   John R. Lonigro
• [Elecraft] 4CX250's   [email protected]
• [Elecraft] re:HELP! After MODS no out put 15/17 meters. BEWARE!!!   George Winship
• [Elecraft] Relay life in KAT2?   Joe P
  • [Elecraft] Re: Relay life in KAT2?   Wayne Burdick
    • [Elecraft] Re: Relay life in KAT2?   Joe P
  • [Elecraft] Relay life in KAT2?   Stuart Rohre
• [Elecraft] Elecraft IRC   n3drk
• [Elecraft] If there are any questions, please email me by Saturday 0100Z.   n3drk
• [Elecraft] K2 XFIL Oddity   Joe P
  • [Elecraft] K2 XFIL Oddity   Vic Rosenthal
  • [Elecraft] K2 XFIL Oddity   John, KI6WX
• [Elecraft] Filter loss   Stewart Baker
• [Elecraft] K2 #3212 on the air and keyer auto-detect   Ed Milcarsky
• [Elecraft] KAT100 tuner- many thanks for all recvd messages   Daniel L Brinneman
• [Elecraft] K1 # 1605   C. GONDARD
• [Elecraft] KPA100 power bounces   Pete Meier
• [Elecraft] External headset and speaker for Field Day   Andreas KU7T
  • [Elecraft] External headset and speaker for Field Day   Rich Lentz
• [Elecraft] Reminder: tighten RF power transistors after 10 hrs.   [email protected]
  • [Elecraft] Reminder: tighten RF power transistors after 10 hrs.   Richard Lim
• [Elecraft] ELECRAFT NET: Elecraft ROUNDTABLE for Summer   Stephen King
• [Elecraft] Lyle - KDSP2   N2TK, Tony
• [Elecraft] RE: K1 # 1605   Morrow, Michael A.
• [Elecraft] K2 Low Battery Warning   Todd Fonstad
• [Elecraft] Smoke back in L1?   Jeff Burns
• [Elecraft] KPA-100 and Power Supply in EC2?   [email protected]
• [Elecraft] Filter loss   Stewart Baker
• [Elecraft] ptt problem   [email protected]
  • [Elecraft] ptt problem   Bob Nielsen
• [Elecraft] Elecraft net Notice   Kevin Rock
• [Elecraft] test   Kevin Rock
• [Elecraft] Elecraft net Notice   Kevin Rock
• [Elecraft] ptt problem   [email protected]
• [Elecraft] Murphy and his ugly head   Richard Lim
• [Elecraft] Lights for Astron VS-20-RM?   Tom, W6WW
• [Elecraft] K2 #3457 first impressions   Andy Bullington
  • [Elecraft] K2 #3457 first impressions   Joe P
• [Elecraft] Omni VI+ A/B Test Results   [email protected]
• [Elecraft] Front Pannel bord (R16, R15)???   [email protected]
  • [Elecraft] Front Pannel bord (R16, R15)???   Joe P
    • [Elecraft] Front Pannel bord (R16, R15)???   [email protected]
      • [Elecraft] Front Pannel bord (R16, R15)???   Bruce D. McLaughlin
  • [Elecraft] Front Pannel bord (R16, R15)???   David A. Belsley
• [Elecraft] Soldering temperature of KPA100, KAT100   Edward Ringel
  • [Elecraft] Soldering temperature of KPA100, KAT100   David A. Belsley
  • [Elecraft] Soldering temperature of KPA100, KAT100   Lyle Johnson
  • [Elecraft] Soldering temperature of KPA100, KAT100   Vic Rosenthal
  • [Elecraft] Soldering temperature of KPA100, KAT100   Tom Hammond
    • [Elecraft] Soldering temperature of KPA100, KAT100   Harry Yingst
  • [Elecraft] Soldering temperature of KPA100, KAT100   Bruce D. McLaughlin
• [Elecraft] Elecraft CW net   Kevin Rock
• [Elecraft] K2 #3475 Complete and first QSO   Jason Hissong
  • [Elecraft] K2 #3475 Complete and first QSO   Bruce D. McLaughlin
• [Elecraft] kpa100 question   R. Coakley
• [Elecraft] Correction   Kevin Rock
• [Elecraft] K2 on Irish national TV!   Brendan Minish
• [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   [email protected]
  • [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   Trevor Day
  • [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   John J. McDonough
  • [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   Vic Rosenthal
  • [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   Dave
• [Elecraft] Heil Boomset Adapter Info   Mark S. Adams, P.E.
  • [Elecraft] Heil Boomset Adapter Info   Kenneth E. Harker
• [Elecraft] K2/100 in XT2DX video   Kenneth E. Harker
• [Elecraft] Re: Omni VI+ A/B Test Results   Indy
• [Elecraft] Delaying audio   Indy
  • [Elecraft] Delaying audio   Harry Yingst
  • [Elecraft] Delaying audio   Trevor Day
    • [Elecraft] Delaying audio   Trevor Day
• [Elecraft] K2 on Irish national TV!   Brendan Minish
• [Elecraft] SSB Mods (long)   Stewart Baker
• [Elecraft] Re: Elecraft net   Robert C. Abell
• [Elecraft] Relay life in KAT2?   Wallace, Andy
  • [Elecraft] Relay life in KAT2?   Lyle Johnson
  • [Elecraft] ATU coverage of CW/SSB segments via ANT 1/2 switch (one antenna)   Wayne Burdick
• [Elecraft] Delaying audio   Larry Benko
• [Elecraft] RE: ATU coverage of CW/SSB segments via ANT 1/2 switch (one antenna)   Wallace, Andy
• [Elecraft] OT: International Lighthouse/ship Weekend 2003   Charles Mabbott
  • [Elecraft] Re: [fpqrp] OT: International Lighthouse/ship Weekend 2003   Mac Steinmeyer
• [Elecraft] Excellent presentation on low current drain transceiver design based on the K2 principles at Ham Com   Stuart Rohre
• [Elecraft] Why Does Antenna Feedline Have 2 Wires   John, KI6WX
  • [Elecraft] Why Does Antenna Feedline Have 2 Wires   David A. Belsley
• [Elecraft] The Complete DX'r   [email protected]
• [Elecraft] PS on The Complete DX'r   [email protected]
• FW: [Elecraft] K2 #3457 first impressions   Dan Barker
• [Elecraft] Why Does Antenna Feedline Have 2 Wires   David A. Belsley
• [Elecraft] K2 on Irish national TV!   [email protected]
• [Elecraft] KAT2 R6 question   Robert J Greenwalt Jr
  • [Elecraft] KAT2 R6 question   Joe P
• [Elecraft] PS on The Complete DX'r   Julian (G4ILO)
  • [Elecraft] PS on The Complete DX'r   Vic Rosenthal
    • [Elecraft] PS on The Complete DX'r   Harry Yingst
      • [Elecraft] PS on The Complete DX'r   Julian, G4ILO
      • [Elecraft] PS on The Complete DX'r   Julian (G4ILO)
    • [Elecraft] PS on The Complete DX'r   Bob Nielsen
• [Elecraft] RE: K2/100 in XT2DX Video   Lee
• [Elecraft] Yippee, M0KWV finally gets on air with K1-K1-4 #1534   [email protected]
• [Elecraft] FD Plans N9NE and K7RE   Brian Kassel
• [Elecraft] PS on The Complete DX'r   Ron D'Eau Claire
  • [Elecraft] PS on The Complete DX'r   Kenneth E. Harker
• [Elecraft] Audio delay, thank you!   Indy
• [Elecraft] Trace cutting tutorial   Gil Stacy
  • [Elecraft] Trace cutting tutorial   Ron D'Eau Claire
  • [Elecraft] Trace cutting tutorial   Bob Nielsen
• [Elecraft] Re: Topband: Omni VI+ A/B Test Results   [email protected]
• [Elecraft] OFF TOPIC magnetic loop antenna   David Schornak
  • [Elecraft] OFF TOPIC magnetic loop antenna   Dave
  • [Elecraft] OFF TOPIC magnetic loop antenna   Jeff Burns
• [Elecraft] PS on The Complete DX'r   Julian (G4ILO)
  • [Elecraft] PS on The Complete DX'r   Stuart Rohre
• [Elecraft] KDSP2 - strange problem   Douglas Westover
  • [Elecraft] KDSP2 - strange problem   Bob Nielsen
• [Elecraft] Omni VI+ A/B Test Results   Charles Greene
• [Elecraft] k2 3269   John Cooper
• [Elecraft] PS on The Complete DX'r   Guy Olinger, K2AV
  • [Elecraft] PS on The Complete DX'r   Ron D'Eau Claire
• [Elecraft] KPA100 troubleshooting question   R. Coakley
  • [Elecraft] KPA100 troubleshooting question   Bruce D. McLaughlin
• [Elecraft] Problem KAT100 vs. KAT2   Steve & Anne Ray
• [Elecraft] K2 Mojo: 500mW DX   Jason Hissong
• [Elecraft] Please refresh my memory :-)   [email protected]
  • [Elecraft] Missing encoder hardware   Edward Kenworthy
    • [Elecraft] Missing encoder hardware   Nate Lewis
      • [Elecraft] Missing encoder hardware   Edward Kenworthy
      • [Elecraft] Missing encoder hardware   Bruce D. McLaughlin
  • [Elecraft] Please refresh my memory :-)   Dave-KK7SS
• [Elecraft] FW: Re:_[Elecraft]_PS_on_The_Complete_DX'r   Julian, G4ILO
• [Elecraft] PS on The Complete DX'r   Julian (G4ILO)
• [Elecraft] Why does Antenna Feedline have 2 wires   Dave Jewell
  • [Elecraft] Why does Antenna Feedline have 2 wires   Bruce D. McLaughlin
• [Elecraft] PS on the Complete DX'r   Dave Jewell
• [Elecraft] Re: PS on The Complete DX'r   Peter Lutz AA6AV
• [Elecraft] Faraday Loop   Christopher L. Cowan
• [Elecraft] no more morse code test   John Cooper
  • [Elecraft] no more morse code test   David Pratt
• [Elecraft] morse to all who responded   John Cooper
• [Elecraft] Improving your cw (was the international treaty thing)   Buddy Brannan
  • [Elecraft] Improving your cw (was the international treaty thing)   Tom, W6WW
    • [Elecraft] Improving your cw (was the international treaty thing)   Ron D'Eau Claire
      • [Elecraft] Improving your cw (was the international treaty thing)   Tom, W6WW
    • [Elecraft] Improving your cw (was the international treaty thing)   Tom Hammond
      • [Elecraft] Improving your cw (was the international treaty thing)   Tom, W6WW
    • [Elecraft] Improving your cw (was the international treaty thing)   David A. Belsley
    • [Elecraft] Improving your cw (was the international treaty thing)   Buddy Brannan
      • [Elecraft] Improving your cw (was the international treaty thing)   Tom, W6WW
    • [Elecraft] Improving your cw (was the international treaty thing)   Joe P
      • [Elecraft] Improving your cw (was the international treaty thing)   Tom, W6WW
• [Elecraft] Bias resistor for KSB2 mic adaptor on front panel   [email protected]
  • [Elecraft] Bias resistor for KSB2 mic adaptor on front panel   Edward Kenworthy
• [Elecraft] Re: Spectrum Analyzer kits   Kevin Cozens
• [Elecraft] Out of the frying pan and into the....KPA100   Andy Bullington
  • [Elecraft] Out of the frying pan and into the....KPA100   Leo Starrenburg PA5LS
  • [Elecraft] Out of the frying pan and into the....KPA100   N2TK, Tony
  • [Elecraft] Out of the frying pan and into the....KPA100   Philip L Carter
  • [Elecraft] Out of the frying pan and into the....KPA100   Sherman Banks
  • [Elecraft] Out of the frying pan and into the....KPA100   Bruce D. McLaughlin
• [Elecraft] FT-1000D A/B Test Results   [email protected]
  • [Elecraft] FT-1000D A/B Test Results   WQ8Q
• [Elecraft] Bias resistor for KSB2 mic adaptor on front panel   Gary Hembree
  • [Elecraft] Bias resistor for KSB2 mic adaptor on front panel   Tom Hammond
• [Elecraft] Improving your cw (was the international treaty thing)   [email protected]
• [Elecraft] kat100   John Cooper
  • [Elecraft] kat100   Jim Campbell
• [Elecraft] K2 CW external interface   James C. Hall, MD
• [Elecraft] Hakko 808 Kit special for 166.74   Evan Cirelli
• [Elecraft] Any IRC users?   [email protected]
• [Elecraft] Great Little Radio   John
  • [Elecraft] Great Little Radio   Dave
• [Elecraft] Alignment and Test Part II - BFO Problem.....   Dennis Ponsness
  • [Elecraft] Alignment and Test Part II - BFO Problem.....   Bruce D. McLaughlin
• [Elecraft] Alignment and Test Part II - BFO Problem.....Never MInd!   Dennis Ponsness
• [Elecraft] Re: Improving your cw (was the international treaty thing)   Dave Sergeant
  • [Elecraft] Re: Improving your cw (was the international treaty thing)   Ron D'Eau Claire
    • [Elecraft] Re: Improving your cw (was the international treaty thing)   Tom Hammond
• FW: [Elecraft] K2 CW external interface   Dan Barker
• [Elecraft] KDSP2 - strange problem   [email protected]
  • [Elecraft] KDSP2 - strange problem & fix   Bill NY9H
• [Elecraft] fishing pole blanks   [email protected]
• [Elecraft] Re: Improving your cw (was the international treaty thing)   [email protected]
  • [Elecraft] Re: Improving your cw (was the international treaty thing)   Vic Rosenthal
    • [Elecraft] Re: Improving your cw (was the international treaty thing)   Charles Mabbott
      • [Elecraft] Re: Improving your cw (was the international treaty thing)   Doug Faunt N6TQS +1-510-655-8604
    • [Elecraft] Re: Improving your cw (was the international treaty thing)   Ron D'Eau Claire
    • [Elecraft] Re: Improving your cw (was the international treaty thing)   Thom LaCosta
• [Elecraft] more solder   John Veach
• [Elecraft] kat100 operational questions   John Cooper
• [Elecraft] BuddiTune - Concept Device   Daniel Reynolds
  • [Elecraft] BuddiTune - Concept Device   Bob Nielsen
• [Elecraft] IRC Success!   [email protected]
• [Elecraft] LEARC FD!!   Wayne K9DI
  • [Elecraft] LEARC FD!!   Milt Jensen
• [Elecraft] KDSP2 after the honeymoon   Dave
  • [Elecraft] KDSP2 after the honeymoon - F/W Upgrade   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] BuddiTune - Concept Device   Daniel Reynolds
• [Elecraft] SuperAntenna MP-2   Dave White
• [Elecraft] KDSP2 F/W Upgrade - clarification?   [email protected]
  • [Elecraft] KDSP2 F/W Upgrade - clarification?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] N2CQ QRP Contest Calendar - June 25-30   Ken Newman
• [Elecraft] RE: K2 CW external interface   James C. Hall, MD
• [Elecraft] ssb option   John Cooper
• [Elecraft] nevermind   John Cooper
• [Elecraft] by the way   John Cooper
  • [Elecraft] OT: Test Equipment Set FS   Michael Melland
• [Elecraft] Improving your CW   Robert Boerhorst
  • [Elecraft] Improving your CW   Bud Rogers
    • [Elecraft] Improving your CW   Lawrence Makoski
• [Elecraft] K1 - No output on 20M   John Huffman
• [Elecraft] Hakko 808 Kit special for 166.74   Gil Stacy
• [Elecraft] Trouble with 40 meter transmitter alignment   Edward Ringel
  • [Elecraft] MFJ259 as Generator for alignment   Don Wilhelm
  • [Elecraft] Trouble with 40 meter transmitter alignment   Bruce D. McLaughlin
• [Elecraft] Field Day   [email protected]
• [Elecraft] Where are we at re. 5 Mhz on the K2/100?   [email protected]
  • [Elecraft] Re: Where are we at re. 5 Mhz on the K2/100?   Wayne Burdick
• [Elecraft] OT: tracing signal corps J-5-A production runs?   [email protected]
• [Elecraft] K2 - QSK   N2TK, Tony
• [Elecraft] K2 #3555 Done and QRV!!   Dennis Ponsness
  • [Elecraft] K2 #3555 Done and QRV!!   Bruce D. McLaughlin
• [Elecraft] FS K-1 serial 108   Michael Tracy
  • [Elecraft] RE: FS K-1 serial 108   Michael Tracy
• [Elecraft] K2 Vox Delay   [email protected]
• [Elecraft] FT100 knob rubber ring   [email protected]
  • [Elecraft] FT100 knob rubber ring   Vic Rosenthal
• [Elecraft] FT100 knob rubber ring   Wim Dewilder
• [Elecraft] Re: k1 SSB project updating   giuliano
• [Elecraft] KPA100 current drain test   Gil Stacy
• [Elecraft] KAT100 no relays switching   Kenneth E. Harker
• [Elecraft] sidetone missing   [email protected]
• [Elecraft] #3479   pfb
  • [Elecraft] #3479   Don Wilhelm
• [Elecraft] FW: Problem with the ADSP2 for the 817   Bruce Thompson
• [Elecraft] FD Mojo   [email protected]
• [Elecraft] 3544 working?   Keith Hamilton
  • [Elecraft] 3544 working?   Ron D'Eau Claire
• [Elecraft] #3544 better now   Keith Hamilton
• [Elecraft] CW filters   Keith Hamilton
  • [Elecraft] CW filters   Don Wilhelm
• [Elecraft] Preliminary EDC100 screwdrive antenna controller review   Paul Ermisch
  • [Elecraft] Preliminary EDC100 (SDC100) screwdrive antenna controller review   Eric Swartz WA6HHQ - Elecraft
    • [Elecraft] Preliminary EDC100 (SDC100) screwdrive antenna controller review   Paul Ermisch
• [Elecraft] Elecraft's been holding out on us!   WQ8Q
• [Elecraft] Field Day Impressions and Questions   rick jones
• [Elecraft] KAT100 no relays switching   Kenneth E. Harker
• [Elecraft] Inivitation for Original QRP Contest   DL1RNN
• [Elecraft] poor probagation   [email protected]
• [Elecraft] FD Report   Richard Lim
• [Elecraft] FD Mojo & Results   [email protected]
• [Elecraft] psk31   John Cooper
  • [Elecraft] psk31   Ron D'Eau Claire
  • [Elecraft] psk31   Don Wilhelm
• [Elecraft] Short FD report on our K2/100 experiences   Tom Hammond
• [Elecraft] K2 FD w/DSP   W2AGN
• [Elecraft] K2 PLL reference oscillator range test   [email protected]
  • [Elecraft] K2 PLL reference oscillator range test   Bob Nielsen
  • [Elecraft] K2 PLL reference oscillator range test   John, KI6WX
  • [Elecraft] K2 PLL reference oscillator range test   Bruce D. McLaughlin
• [Elecraft] Re: K1 - No output on 20M   John Huffman
• [Elecraft] IC-746 PRO A/B Test Results   [email protected]
  • [Elecraft] IC-746 PRO A/B Test Results   Edward Kenworthy
    • [Elecraft] IC-746 PRO A/B Test Results   W2AGN
      • [Elecraft] IC-746 PRO A/B Test Results   Vic Rosenthal
      • [Elecraft] IC-746 PRO A/B Test Results   Pat Shaughnessy
      • [Elecraft] IC-746 PRO A/B Test Results (LONG)   Dale Boresz
  • [Elecraft] IC-746 PRO A/B Test Results   n3drk
• [Elecraft] Filter problems   Keith Hamilton
• [Elecraft] Filter problems PS   Keith Hamilton
• [Elecraft] IC-746 PRO A/B Test Results   [email protected]
• [Elecraft] Is there a way to adjust the scan pause time setting?   KS7J
• [Elecraft] PS on The Complete DX'r   Wallace, Andy
• [Elecraft] K1 #1534 Going Great   [email protected]
• [Elecraft] K2 impressions on Field Day   Andy Bullington
• [Elecraft] NEW! Elecraft @ Dallas "New Elecraft Bed"   WQ8Q
  • [Elecraft] Unsolicited Internal Battery Testimonial   Mychael Morohovich AA3WF
• [Elecraft] Dallas Picture - Let's try again`   WQ8Q
• [Elecraft] FD impressions from N7OS   Andreas KU7T
  • [Elecraft] FD impressions from W8HF   Steve
• [Elecraft] NEW! Elecraft @ Dallas "New Elecraft Bed"   Engr Guy
• [Elecraft] KAT100 - HELP!!   Rick Tilton
• [Elecraft] kat100   John Cooper
• [Elecraft] KBT3 - K2 fuel cell   Daniel Reynolds
• [Elecraft] K2 Internal battery battery replacement Europe?   Deni
  • [Elecraft] K2 Internal battery battery replacement Europe?   Leo Starrenburg PA5LS
  • [Elecraft] K2 Internal battery battery replacement Europe?   Dave
• [Elecraft] Fw: k2 af gain control   n3drk
  • [Elecraft] Fw: k2 af gain control   Ron D'Eau Claire
• [Elecraft] Propagation etc.   George Davis
• [Elecraft] FD with K2 #3475   Jason Hissong
• [Elecraft] IC-746 PRO A/B Test Results   [email protected]
• Fw: [Elecraft] psk31   Don Wilhelm
• [Elecraft] K2 audio output   Charles Greene
• [Elecraft] KAT100 no relays switching   Kenneth E. Harker

Last message date: Mon Jun 30 23:22:01 2003
Archived on: Mon Mar 22 18:16:43 2004

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...