[Elecraft] Solved Problem Noise Blanker - K2 Ser# 3479

[pfb]

To All,

Problem solved.  Receiver is as hot as ever.!!  And the NB works fine!!!

Here is the description of the problem:

On the solder side of the RF board.... I bent over capacitor C161 to keep it
low on the board as instructions indicate and I bent it in a direction that
"hide two leads of the female section of P1" that is attached to the main
board.  I never soldered the two leads hidden under the capacitor C161.  I
should have bent it the other direction.

Thanks to all that helped solve this.  Everyone that responed helped and
contributed in isolating this problem that took it a step at a time and I
appreciate it.

Paul
K8QT