[Elecraft] Re: Elecraft digest, Vol 4 #191 - 66 msgs

[giuliano]

Julian,

i sumarize here same measures:

-RX/TX band coverage is  about 250 KHz. (14000 -14250 Khz and 7000-7250 Khz)
This coverage is possible adding a 68 pF ( NP0 cap.)  parallel to C2, so
the total cap. is 168 pF.
With this mod i have this frequency drift:
after 5 minuts warm-up: initial measurement ,
after 1/2 hour:  -130 Hz
after 1 hour: -260 Hz

I have only a 2 band filter board (40/20 m) so i have made measures only for
these  band.

Coverage on TX is, for all 250 KHz:  4-6 Watts

The mod. isn't yet Elcraft approved because Wayne, in this moment, is very
busy with others new projects and  suggest me to make more tests with others
HAM; so I am serching for betatester.
Wayne tell me that can test the mod. on the Elecraft laboratory later on
July or August.

73
Giuliano I0CG

"Julian, G4ILO" wrote:


> I wondered about that, too. What band coverage does a K1 have? It doesn't
> appear to be listed in the data sheet.
>
> What's the "official" Elecraft view on this mod? I can't find any info or
> links to it on the Elecraft site. A K1/SSB would be what I hoped the
FT-817
> would be, but I'd really prefer to see a fully Elecraft approved version
of
> this mod.
>
> 73,
> --
> Julian, G4ILO. (RSGB, ARRL, G-QRP, K2 #392)
> G4ILO's Shack: http://www.qsl.net/g4ilo
>
> "Martin AC6RM" <elecraft@ac6rm.net> wrote:
>
> Say, does anyone have any data on the frequency stability of the K1?  With
> I0CG's mod, I was thinking it'd make a cool dedicated data radio ...
> 73, Martin AC6RM k2/100 #3021
>
>