[Elecraft] K2 internal speaker dead

[David A. Belsley]

Harry:
  Tune in a signal you can hear with your earphones, remove the earphones, 
then check for audio at the speaker plug P5 on the RF board.  If there is 
no audio there, start tracing backwards in the circuit.  The problem spot 
should be easy to find.  Since you're getting audio to the earphones, it is 
likely that the turn-off switch in the earphone jack is not closing when 
you remove the earphone plug.  (Recall also that there will be no audio to 
the speaker while your earphones are plugged in.)

best wishes,

dave belsley, w1euy

--On Thursday, June 19, 2003 10:07 AM -0400 DK2GZ@aol.com wrote:

> Hello
>
> since today I can only use headphones on the K2.
>
> The internal speaker doesnt work anymore.
>
> Also when i put he headphones into the external speaker
> jack, I dont hear the AF.
>
> I checke the AF cable inside the K2, but all o,k,
>
>
> 73 de Harry, DK2GZ
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com



----------------------------------
David A. Belsley
Professor of Economics