[Elecraft] K2 akignment and test, part II - solved!

[Tom Hammond]

Larry's 'soft-peddlng' this video... it's an EXCELLENT example of using the 
'solder blob' method of tinning heat-strippable wires.

This should be a must-see video for all new builders, and probably many of 
us 'old pros' as well!

The actual video file is about 3.6MB in size, and I found it easier to 
first DOWNLOAD the entire file and then play it, rather than wait for each 
new 'chunk' to download 'as required'. 'Chunking' the video in real time 
makes the video much less fun to follow... that is unless you have 
high-speed access... then you're cheating.. heheh!

Thanks Larry, AND of course, to Scott at Emtech.

73,

Tom Hammond   N0SS

>As far as tinning toroid leads goes; Scott at Emtech has a great video on
>his Website that you can watch using Realplayer or Windows Media Player.  He
>shows how he does it and his method worked great for me when I built my ZM2
>ATU.
>
>Here's the url:
>http://emtech.steadynet.com/gallery.shtml
>
>Standard disclaimer - I'm not an owner, partner to or relative of Scott at
>Emtech.  Just a satisfied customer who found this little added bit of
>customer service to be a nice touch.
>
>73 de Larry W2LJ
>
>W2LJ@arrl.net