[Elecraft] RE: ATU coverage of CW/SSB segments via ANT 1/2 switch (one antenna)

[Wallace, Andy]

> -----Original Message-----
> From: Wayne Burdick [mailto:n6kr@elecraft.com]
>=20
> "Wallace, Andy" wrote:
>=20
> > Now one thing I've thought about is using the KAT2 second ant
> > connector like this: use ANT1 for the CW portion of all bands,
> > and use the ANT2 jack for the SSB one.=20
> Andy,
>=20
> If you have only one antenna, you could use a "Y" cable from=20
> the antenna to *both* antenna jacks on the KAT2.=20

I thought of doing something similar - jumpering a wire on the=20
KAT2 board to short ANT1 to ANT2. I take it that wouldn't hurt
anything. Since it's my rig, and my long-term memory, I'll stick
a rubber boot over ANT2 afterwards... ;-)

Andy