[Elecraft] re:HELP! After MODS no out put 15/17 meters. BEWARE!!!

[George Winship]

After doing all the mods to bring my K2 up to new standards, I had no
output on 15/17 meters. After Gary's prompt reply with suggestions,
which all checked out, I took the heat sink back off and reexamined
the board. Found a bridge across three pins on one of the relays. I
was careless when cocking my solder popper and shot some solder onto
the board causing the bridge.

Be aware of where you have yours pointed when cocking it. This little
incident cost me 2 hours of hunting.

73,

George, NC5G