[Elecraft] K2/KPA100 lockup

[Ken Wagner]

Hi Ken:
Does it do this even with the KPA-100 completely disconnected from the K2?
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~
At 04:38 PM 6/13/03, you wrote:

>Hi all.
>
>I finished the KPA100 and it has checked out fine up until
>page 46 of the manual.
>
>I am using it with K2 #769.
>
>At the top right of the page, I says to Use the mode switch
>to select CW mode etc.
>
>Well, I press the mode switch and the K2 went to L (lower
>SSB) and has been (the K2) locked up
>
>ever since.
>
>None of the switches function. The only thing that works, is
>the power control, which displays .1 to 15 w, as it should.
>
>The display is stuck on 7.1000 L.
>
>The 'Elecraft' display on start up works okay.
>
>If I hold a button on turn-on, it DOES NOT show the version.
>
>
>
>Any assistance? Ideas?
>
>
>
>73
>
>Ken WB2ART
>
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>   text/plain (text body -- kept)
>   text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>_______________________________________________
>Elecraft mailing list: Elecraft@mailman.qth.net
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com