[Elecraft] K1 - No output on 20M

[John Huffman]

My K1 has been perking along just fine until now.  But, now I have =
no/low output on 20m.  Here's the details:

K1 - 1302, 2 band (40M and 20M)
40M all is well, receiving and transmitting.
20M receives OK but transmit power is 0.1W, raising to 0.2W after a few =
seconds.  Test is into a dummy load.

I checked the 22 MHz crystal and can hear it on my other receiver (K2).  =


I repeaked the band filters for 20M.

I have OUT set at 2.5W and "b2" set for 14.

It has worked fine since last August up until now.

Any suggestions are most welcome!

73 de NA8M
John


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---