[Elecraft] K2 - parts missing ? Extra parts ?

[Francis Belliveau]

Note that you should also measure from pin 2 to 3, etc. and ensure that
there is no connection.  just in case the part is wired the other way.

Fran
----- Original Message -----
> Not necessarily.  It could be a substitute from a different supplier.
> The "471" could mean it is the correct value.  Use an ohmmeter and
> check from pin 1 to 2, 3 to 4, 5 to 6, etc.  They should all read 470
> ohms (+/- tolerance).  If so, it is the correct part.