2004-February Archives by Thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Feb 1 02:05:01 2004
Ending: Sun Feb 29 23:08:01 2004
Messages: 1062

• [Elecraft] KAT100 and K2 firmware upgrades   Andrew Catanzaro
  • [Elecraft] KAT100 and K2 firmware upgrades   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K2 initial testing, a follow up   [email protected]
  • [Elecraft] N4PY K2 Control Program Version 2.13 now available   Carl Moreschi
• [Elecraft] K2 Battery Shelf Life   Carter W. Craigie
  • [Elecraft] K2 Battery Shelf Life   Don Wilhelm
  • [Elecraft] K2 Battery Shelf Life   Mychael Morohovich
• [Elecraft] KX-1 Cap identification question   Brian Wruble
  • [Elecraft] KX-1 Cap identification question   Ron D'Eau Claire
• [Elecraft] part nos.   [email protected]
  • [Elecraft] part nos.   Rick Hampton
• [Elecraft] A to B question: Front panel board   Sverre Holm
• [Elecraft] re: KAT100 and K2 firmware upgrades   James Hammons
• [Elecraft] K1 no xmit   Brad Hedges
• [Elecraft] Control Board and KAT100 Mods   Lee Buller
• [Elecraft] Need help with Bargraph Current Test on K2   David Haas
• [Elecraft] K2 initial testing, follow up 2   [email protected]
• [Elecraft] KX1 current draw   Mike B
• [Elecraft] WTB - LATE SN K2   K3PZ - PAUL
• [Elecraft] Cleaning out those tiny little plated thru holes   James T. "Jim" Rogers
• [Elecraft] Need help with Bargraph Current Test on K2   James T. "Jim" Rogers
  • [Elecraft] Need help with Bargraph Current Test on K2   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K2 KAT2 and KBT2 and KIO2   Tom Arntzen LA1PHA
  • [Elecraft] K2 KAT2 and KBT2 and KIO2   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Elecraft CW Net Announcement   Kurt Cramer
• [Elecraft] Elecraft CW Net Report for February 1, 2004   Kevin Rock
• [Elecraft] DSP U2 tab soldering?   JAKidz
  • [Elecraft] DSP U2 tab soldering?   Lyle Johnson
• [Elecraft] Elecraft CW Net/2 February 2, 2004   Kevin Rock
• [Elecraft] ECN Experience   James C. Hall, MD
  • [Elecraft] ECN Experience   Tom Hammond
• [Elecraft] (no subject)   D.W. Harms PA2DW
  • [Elecraft] (no subject)   Don Wilhelm
    • [Elecraft] SSB and mixer   D.W. Harms PA2DW
• [Elecraft] Trade unassembled K1 for assembled KX1   NZ8J
  • [Elecraft] Trade unassembled K1 for assembled KX1   NZ8J
• [Elecraft] k2 no transmit power   David Schornak
  • [Elecraft] k2 no transmit power   Don Brown
  • [Elecraft] k2 no transmit power   Bob Tellefsen
  • [Elecraft] k2 no transmit power   Rick Dettinger
  • [Elecraft] k2 no transmit power   David Schornak
• [Elecraft] New Rig Runner 4010S   Rod N0RC
• [Elecraft] K2 #3927 on the air! Thanks to all!   Trent - KD7WUR
• [Elecraft] Custom Knob   Darrell Bellerive
  • [Elecraft] Custom Knob   David Schornak
    • [Elecraft] Custom Knob   Don Wilhelm
      • [Elecraft] Custom Knob   Lee Buller
      • [Elecraft] Custom Knob   Carl Strode
      • [Elecraft] Custom Knob   Jimmy Lee
• [Elecraft] K2 and 60m   Linden, Mike (BRC-Hes)
  • [Elecraft] Re: K2 and 60m   Wayne Burdick
• [Elecraft] PLL Reference Oscillator Range Test   Roger Marrotte
• [Elecraft] Custom Knob   James T. "Jim" Rogers
• [Elecraft] PLL Reference Oscillator Range Test   James T. "Jim" Rogers
• [Elecraft] K2 and 60m   James T. "Jim" Rogers
  • [Elecraft] K2 and 60m   Gregg Lengling
• [Elecraft] xg-1 question   John Cooper
  • [Elecraft] xg-1 question   Don Brown
• [Elecraft] KX1 Progress Report-WOOHOO-2   Rod Adams
• [Elecraft] Custom Knob   Tom Mc
  • [Elecraft] Custom Knob   Jerry Hancock
• [Elecraft] Just Got the KAT100 Done - Impressed!!!!   Lee Buller
• [Elecraft] DSP Mute Problem   Charles Bland
• [Elecraft] Just a note of interest   Jerry Ford
• [Elecraft] KAT100 and K2 firmware upgrades   COLIN WHITMORE
• [Elecraft] The KAT100 is Done - IMPRESSIVE!!!!   Lee Buller
• [Elecraft] building the K1   Steven J Baumrucker, MD
  • [Elecraft] building the K1   Larry - WA2DGD
• [Elecraft] building the K1   Steven J Baumrucker, MD
  • [Elecraft] building the K1   John R. Lonigro
• [Elecraft] New Top cover for K2 for sale   Don Wilhelm
• [Elecraft] K2 Custom Knob and Carrying Handle   [email protected]
• [Elecraft] K2 varactor diode installation?   Ted Holland
  • [Elecraft] K2 varactor diode installation?   Steve Lawrence
• [Elecraft] Kudos to Elecraft!   Sid Leben
• [Elecraft] Custom Knob   [email protected]
• [Elecraft] FS: K2 with almost every option   Peter Halpin
• [Elecraft] Re: Elecraft digest, Vol 4 #438 - 15 msgs   [email protected]
• [Elecraft] Diode testing   [email protected]
  • [Elecraft] Diode testing   Tom Arntzen LA1PHA
  • [Elecraft] Diode testing   Don Wilhelm
• [Elecraft] K2 Transmitter alignment   James T. "Jim" Rogers
  • [Elecraft] K2 Transmitter alignment   David Schornak
    • [Elecraft] K2 Transmitter alignment   Don Wilhelm
    • [Elecraft] Top cover   D.W. Harms PA2DW
  • [Elecraft] K2 Transmitter alignment   Don Wilhelm
• [Elecraft] Questions for KAT100 Gurus   Lee Buller
  • [Elecraft] Questions for KAT100 Gurus   Vic Rosenthal
  • [Elecraft] Re: [Questions for KAT100 Gurus   Wayne Burdick
• [Elecraft] kat2 questions again   John Cooper
  • [Elecraft] kat2 questions again   Lyle Johnson
  • [Elecraft] kat2 questions again   Don Wilhelm
• [Elecraft] re-diode testing   [email protected]
• [Elecraft] kat2 questions again   Engr Guy
• [Elecraft] thanks for all the replies!   John Cooper
• [Elecraft] need the old L33   John Cooper
• [Elecraft] K2 Question - control board   [email protected]
  • [Elecraft] K2 Question - control board   Henry Gardiner
    • [Elecraft] K2 Question - control board   Don Wilhelm
    • [Elecraft] K2 Question - control board   Don Brown
• [Elecraft] K2 QRV from V73 this weekend   Jeffrey Parker
• [Elecraft] K2 Question - control board   James T. "Jim" Rogers
• [Elecraft] diode fav brand   John Cooper
  • [Elecraft] diode fav brand   Bob-AG5Q
• [Elecraft] FS: K1   Steve Zumbrun
• [Elecraft] Relay noise in KAT 100   Dave White
• [Elecraft] RE: diode fav brand   ROD J MURRAY
• [Elecraft] OT - Soldering Crystal Cans   Bill Tippett
  • [Elecraft] OT - Soldering Crystal Cans   Stuart Rohre
  • [Elecraft] OT - Soldering Crystal Cans   Tom Hammond
    • [Elecraft] OT - Soldering Crystal Cans   Don Wilhelm
• [Elecraft] FS: K2 KAT2   Christopher Kovacs
• [Elecraft] 8v line resistance check solved   [email protected]
• [Elecraft] XG1 Builder Report   William M. Spaulding, Sr.
• [Elecraft] DMM Recommendations   Ryan Nedbalek
  • [Elecraft] DMM Recommendations   Don Brown
  • [Elecraft] DMM Recommendations   Joe - aa4nn
  • [Elecraft] DMM Recommendations   Ryan Nedbalek
    • [Elecraft] DMM Recommendations   Ron D'Eau Claire
      • [Elecraft] DMM Recommendations   Don Wilhelm
      • [Elecraft] DMM Recommendations   Vic Rosenthal
• [Elecraft] DMM Recommendations   DAVE HEALY
• [Elecraft] PLL Reference Oscillator Range Test Problems   Dennie Mildfeldt
• [Elecraft] N2CQ QRP Contest Calendar Feb 7-29, 2004   Ken Newman
• [Elecraft] PLL Reference Oscillator Range Test Problems   James T. "Jim" Rogers
• [Elecraft] XG1 Tests   Rod Adams
• [Elecraft] DMM Recommendations   Kevin Rock
  • [Elecraft] DMM Recommendations   Lee Buller
• [Elecraft] XG1 Tests-OOPS   Rod Adams
  • [Elecraft] XG1 Tests-OOPS   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K1 gone   Steve Zumbrun
• [Elecraft] Appalachian Trail Award Updates   Ron Polityka
• FW: [Elecraft] DMM Recommendations   Dan Barker
• [Elecraft] OT - Soldering Crystal Cans   Pawlak, Daniel
• [Elecraft] K2 QUESTIONS   Chris Page
• [Elecraft] help/ QSK 5   Ron Spencer
  • [Elecraft] help/ QSK 5   Tom Hammond
    • [Elecraft] help/ QSK 5   Lutz Kahlbau
  • [Elecraft] help/ QSK 5   Douglas Westover
  • [Elecraft] help/ QSK 5   Dale Boresz
• [Elecraft] K2 Battery Shelf Life   Carter W. Craigie
• [Elecraft] K2 QUESTIONS   Chris Page
• FW: [Elecraft] DMM Recommendations   Gil Stacy
• [Elecraft] FYBO plans   Bruce Grubbs
• [Elecraft] solder   [email protected]
  • [Elecraft] solder   Don Brown
  • [Elecraft] solder   Stuart Rohre
• [Elecraft] DMM Recommendations   Tom Mc
• [Elecraft] solder   Tom Mc
  • [Elecraft] solder   Ron D'Eau Claire
• [Elecraft] solder   [email protected]
• [Elecraft] RMA flux   john
• [Elecraft] KRC2 Question   Dave White
  • [Elecraft] KRC2 Question   Jack Brindle
• [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   Trevor Jacobs
  • [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   Don Wilhelm
    • [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   Trevor Jacobs
  • [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   A.K.Forrest
    • [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   Wolf-Ruediger Juergens
      • [Elecraft] K2 Filters - RTTY Mode PSK31...Problem...   Trevor Jacobs
• [Elecraft] Re: Elecraft digest, Vol 4 #441 - 24 msgs   [email protected]
• [Elecraft] K2 ALC Input for QRO Amp   [email protected]
• [Elecraft] kpa100 diode query   Simon Lewis
• [Elecraft] PLL ref Osclllator range test   Ken K7ZUM
• [Elecraft] V73GJ Marshall Islands   Larry - WA2DGD
  • [Elecraft] V73GJ Marshall Islands   Donald Nesbitt
  • [Elecraft] V73GJ Marshall Islands   Lawrence Makoski
  • [Elecraft] V73GJ Marshall Islands   Aron Brown
  • [Elecraft] V73GJ Marshall Islands   Lynn & Cherie Hammond
• [Elecraft] KX1 S Meter   George Davis
  • [Elecraft] KX1 S Meter   David Pratt
    • [Elecraft] KX1 S Meter   Lawrence Makoski
• [Elecraft] Kwajalein Atoll 21.050   Ken N4SO
  • [Elecraft] Kwajalein Atoll 21.050   Lawrence Makoski
• [Elecraft] PLL ref Osclllator range test   James T. "Jim" Rogers
• [Elecraft] PLL ref Osclllator range test   James T. "Jim" Rogers
• [Elecraft] 160m QRP WAS   Bob Tellefsen
  • [Elecraft] 160m QRP WAS   James C. Hall, MD
  • [Elecraft] Re: 160m QRP WAS   Wayne Burdick
• [Elecraft] HELP   scottie
• [Elecraft] Great Job to Elecraft   Clarke Cooper
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft Service   Donnie Garrett
• [Elecraft] RE: KX1 S-Meter   [email protected]
• [Elecraft] K2 no transmit, and no sidetone   [email protected]
• [Elecraft] K2 no transmit, and no sidetone   James T. "Jim" Rogers
• [Elecraft] FS:KPA100   Larry Naumann
• [Elecraft] RE:ELECRAFT KX1 S-Meter   James T. "Jim" Rogers
  • [Elecraft] RE:ELECRAFT KX1 S-Meter   Joe - aa4nn
    • [Elecraft] RE:ELECRAFT KX1 S-Meter   Larry - WA2DGD
  • [Elecraft] RE:ELECRAFT KX1 S-Meter   Guy Olinger, K2AV
• FW: [Elecraft] RE:ELECRAFT KX1 S-Meter   Dan Barker
• [Elecraft] A little more =-"ooomph"   Tom Mc
  • [Elecraft] A little more =-"ooomph"   Don Brown
  • [Elecraft] A little more =-"ooomph"   DAVE HEALY
  • [Elecraft] A little more =-"ooomph"   Rick Dettinger
  • [Elecraft] A little more =-"ooomph"   Sandy W5TVW
  • [Elecraft] A little more =-"ooomph"   Steve Lawrence
    • [Elecraft] A little more =-"ooomph"   Ron D'Eau Claire
      • [Elecraft] A little more =-"ooomph"   Sandy W5TVW
• [Elecraft] Re: 160m QRP WAS   Earl W Cunningham
• [Elecraft] which way   Cox SMTP east
  • [Elecraft] which way   Don Wilhelm
• [Elecraft] EI5EM's K2 No: 3894 all systems go !!!   Tony Breathnach
• [Elecraft] KX1 S Meter   David Pratt
• [Elecraft] which way   James T. "Jim" Rogers
• [Elecraft] Suggestions for a New Kit Builder   Glenn J. Ward
  • [Elecraft] Suggestions for a New Kit Builder   Don Brown
    • [Elecraft] Suggestions for a New Kit Builder   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] Suggestions for a New Kit Builder   Don Brown
  • [Elecraft] Suggestions for a New Kit Builder   Glenn J. Ward
• [Elecraft] My biggest ergonomic issue (K2 DSP)   Vic Rosenthal
  • [Elecraft] My biggest ergonomic issue (K2 DSP)   Lyle Johnson
    • [Elecraft] My biggest ergonomic issue (K2 DSP)   Vic Rosenthal
      • [Elecraft] My biggest ergonomic issue (K2 DSP)   Charles Bland
  • [Elecraft] My biggest ergonomic issue (K2 DSP)   Bob Tellefsen
  • [Elecraft] My biggest ergonomic issue (K2 DSP)   Darrell Bellerive
    • [Elecraft] My biggest ergonomic issue (K2 size)   Brad Hedges
    • [Elecraft] My biggest ergonomic issue (K2 DSP)   Jim Brown
• [Elecraft] Elecraft K2 SN 2275 - new keeper   Howard Oakley
• [Elecraft] Elecraft Net Report 1 February 8, 2004   Kevin Rock
• [Elecraft] Problem with PLL Reference Oscillator Range Test - RESOLVED   Dennie Mildfeldt
• [Elecraft] KX1 30 meter installation question   Aron Brown
• [Elecraft] Beacon Mode?   Jim Brown
• [Elecraft] Elecraft net errata   Kevin Rock
• [Elecraft] 30 meter board question   Aron Brown
• [Elecraft] KX1 - Icefishing + FYBO   Dennis Payton
• [Elecraft] Re: KX1 - Icefishing + FYBO   Dennis Payton
• [Elecraft] Elecraft Net Report /2 February 9, 2004   Kevin Rock
• [Elecraft] k2 audio power output   Ed Finn
  • [Elecraft] k2 audio power output   Tom Hammond
  • [Elecraft] k2 audio power output   Gregg Lengling
• [Elecraft] K1 and 160m   [email protected]
  • [Elecraft] K1 and 160m   Sandy W5TVW
    • [Elecraft] K2 Speaker Fuzzy   Bill Linn
      • [Elecraft] K2 Speaker Fuzzy   Vic Rosenthal
      • [Elecraft] K2 Speaker Fuzzy   Ron D'Eau Claire
      • [Elecraft] K2 Speaker Fuzzy   Bill Linn
      • [Elecraft] K2 Speaker Fuzzy   Tom Hammond
      • [Elecraft] K2 Speaker Fuzzy   Don Brown
    • [Elecraft] 160m K1 band option?   David Toepfer
    • [Elecraft] Extra Manual   Cox SMTP east
• [Elecraft] Temperature TPA reclalibration K2/100   David Howie
  • [Elecraft] Temperature TPA reclalibration K2/100   Don Wilhelm
  • [Elecraft] Temperature TPA reclalibration K2/100   Vic Rosenthal
• FW: [Elecraft] My biggest ergonomic issue (K2 DSP)   Dan Barker
• [Elecraft] Re: Another use for the Hakko 808   [email protected]
• [Elecraft] k2 no transmit power   Pawlak, Daniel
• [Elecraft] Reasons to Split a K2/100?   Bill Acito W1PA
  • [Elecraft] Reasons to Split a K2/100?   Brendan Minish
    • [Elecraft] Reasons to Split a K2/100?   Bill Acito W1PA
      • [Elecraft] Reasons to Split a K2/100?   David Schornak
  • [Elecraft] cw mode forces xmit !!!   Bill NY9H
• Fwd: Re: [Elecraft] Elecraft Net Report /2 February 9, 2004   Kevin Rock
• [Elecraft] Crazy thing happend using Spectrograph   Lee Buller
  • [Elecraft] Crazy thing happend using Spectrograph   k4zm
• [Elecraft] Stolen K2 ebay sale   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Email change/ K5XTX   John Rader
• [Elecraft] cw mode forces xmit !!!   Bill NY9H
• [Elecraft] K2 Unbuilt S/N 2693/3278 for sale   Robert
• [Elecraft] OT - Paddle Recommendations   Dave White
  • [Elecraft] OT - Paddle Recommendations   Sandy W5TVW
    • [Elecraft] OT - Paddle Recommendations   Jimmy Lee
  • [Elecraft] OT - Paddle Recommendations   Dan Presley
    • [Elecraft] OT - Where do you get rid of a 24GHz Mixer?   Timothy A. Raymer
  • [Elecraft] OT - Paddle Recommendations   Mike Harris
    • [Elecraft] OT - Paddle Recommendations   Brad Hedges
    • [Elecraft] OT - Paddle Recommendations   Sonny Smithson
  • [Elecraft] OT - Paddle Recommendations   Jim Brown
• [Elecraft] V73GJ Logs   Jeffrey Parker
• [Elecraft] Elecraft K2 Mini-Manual Now Available   Wayne Burdick
  • [Elecraft] Elecraft K2 Mini-Manual Now Available   Jim Brown
    • [Elecraft] Elecraft K2 Mini-Manual Now Available   Jack Brindle
  • [Elecraft] k2 presentation   David Schornak
• [Elecraft] KSB2 bandwidth - 1.9kHz - SOLVED !   Baker
• [Elecraft] KAT2 SPACER LOCKWASHER PLACEMENT   Ken Jones
• [Elecraft] Two K2s for split operation   Wolfgang A. Schwarz
• [Elecraft] Re: Elecraft K2 Mini-Manual Now Available   Dennis Ponsness
  • [Elecraft] Re: Elecraft K2 Mini-Manual Now Available   Wayne Burdick
• [Elecraft] Paddle Recommendations   Robert C. Abell
  • [Elecraft] Paddle Recommendations   Thomas Beaudry
• [Elecraft] Elecraft WAS #32 issued to N6WG   [email protected]
  • [Elecraft] Re: Elecraft WAS #32 issued to N6WG   Wayne Burdick
    • [Elecraft] reminder: T-shirt/Poster designs due by March 1st   Mike Rioux
• [Elecraft] reminder: T-shirt/Poster designs due by March 1st   Wayne Burdick
• [Elecraft] xtal filter soldering?   Ted Holland
• [Elecraft] KX1 Poor 30m sensitivity   Paul Barlow
  • [Elecraft] KX1 Poor 30m sensitivity   David Pratt
• [Elecraft] solar panel controller   n3drk
  • [Elecraft] solar panel controller   John Cooper
  • [Elecraft] solar panel controller   Don Brown
• [Elecraft] Paddle Recommendations   [email protected]
• [Elecraft] Help needed this weekend at Orlando Hamfest   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] SSB BFO Tuning   John Lucas
  • [Elecraft] SSB BFO Tuning   Ron D'Eau Claire
  • [Elecraft] SSB BFO Tuning   Don Wilhelm
• [Elecraft] 160M K1 band option   Rod Adams
  • [Elecraft] 160M K1 band option   Don Wilhelm
• [Elecraft] k2 audio power output   Ed Finn
• [Elecraft] K1 display alternatives?   Scott Richardson
  • [Elecraft] K1 display alternatives?   David Toepfer
  • [Elecraft] K1 display alternatives?   Rick Dettinger
  • [Elecraft] K1 display alternatives?   Trevor Jacobs
• [Elecraft] solar panel controller   Dave @ Interaccess.com
• FW: [Elecraft] Paddle Recommendations   Dan Barker
• [Elecraft] J.J. Leijssen/EHV/CFT/PHILIPS is out of the office.   [email protected]
• [Elecraft] OT - Paddle Recommendations   Dave White
• [Elecraft] Re: Re solar controller   Don Brown
• [Elecraft] Recommendations for K2 Software?   [email protected]
  • [Elecraft] Recommendations for K2 Software?   Larry - WA2DGD
  • [Elecraft] Recommendations for K2 Software?   Gregg Lengling
  • [Elecraft] Recommendations for K2 Software?   Donald Nesbitt
  • [Elecraft] Recommendations for K2 Software?   John Huffman
• [Elecraft] K2 S/N 3583 on the air   frederick muehlen
• [Elecraft] How and Why for matched crystals?   John Cooper
  • [Elecraft] How and Why for matched crystals?   Don Wilhelm
• [Elecraft] Reasons to Split a K2/100?   Bill Acito W1PA
  • [Elecraft] Reasons to Split a K2/100?   Don Wilhelm
• [Elecraft] K1 display alternatives?   Mike Morrow
• [Elecraft] K2 160m Option   James T. "Jim" Rogers
• [Elecraft] Reasons to Split a K2/100?   James T. "Jim" Rogers
• [Elecraft] DSP and MDS figures   Ron ZL1TW
  • [Elecraft] DSP and MDS figures   Vic Rosenthal
    • [Elecraft] DSP and MDS figures   Vic Rosenthal
• [Elecraft] crystal and transistor questions satisfied   John Cooper
• [Elecraft] Help... PLL Reference Osc. Range Test ...results way to wide.   [email protected]
  • [Elecraft] Help... PLL Reference Osc. Range Test ...results way to wide.   Don Wilhelm
  • [Elecraft] Help... PLL Reference Osc. Range Test ...results way to wide.   John, KI6WX
• [Elecraft] k2 maximum supply voltage?   Jerry Hancock
  • [Elecraft] k2 maximum supply voltage?   Lee Buller
  • [Elecraft] k2 maximum supply voltage?   Don Wilhelm
    • [Elecraft] k2 maximum supply voltage?   Jack Brindle
      • [Elecraft] k2 maximum supply voltage?   Don Wilhelm
    • [Elecraft] k2 maximum supply voltage?   Vic Rosenthal
• [Elecraft] N2CQ QRP Contest Calendar Feb 14-29 2004   Ken Newman
• [Elecraft] The 33rd Annual Greater Baltimore Hamboree and Computerfest   Lloyd Lachow
• [Elecraft] KAT100/KPA100   COLIN WHITMORE
• [Elecraft] Speaker dead   Kevin Rock
• [Elecraft] Found on Buddipole Group   Greg Storms
• [Elecraft] Found on Buddipole Group   James T. "Jim" Rogers
• [Elecraft] IRC Channel   n3drk
• FW: [Elecraft] Found on Buddipole Group   Dan Barker
• [Elecraft] resister pack testing question   John Cooper
  • [Elecraft] resister pack testing question   Bob-AG5Q
  • [Elecraft] resister pack testing question   Stuart Rohre
• [Elecraft] First QSO on K2 #4028   James T. "Jim" Rogers
• [Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?   James T. "Jim" Rogers
  • [Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?   Jay Rutherford
• [Elecraft] RE: K2 transmitting ALC Backwards!   DAVE HEALY
• [Elecraft] K1 display alternatives?   Scott Richardson
• [Elecraft] My turn !   Tom Bosscher
• [Elecraft] My turn !   Earl W Cunningham
• [Elecraft] SPOT   [email protected]
  • [Elecraft] SPOT   Dan Barker
• [Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?   James T. "Jim" Rogers
• [Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?   Earl W Cunningham
  • [Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?   Don Wilhelm
• [Elecraft] thanks for resistor pack answers   John Cooper
• [Elecraft] Version 2.04 firmware   Dave Olean
  • [Elecraft] Version 2.04 firmware   Jack Brindle
• [Elecraft] Use of flux.. and another rant on soldering   Tom Hammond
  • [Elecraft] Use of flux.. and another rant on soldering   Dale Boresz
• [Elecraft] K2: Frequency Shift Between Transmit and Receive   Linden, Mike (BRC-Hes)
  • [Elecraft] K2: Frequency Shift Between Transmit and Receive   Gregg Lengling
• [Elecraft] Use of flux.. and another rant on soldering   [email protected]
  • [Elecraft] Use of flux.. and another rant on soldering   Don Wilhelm
• [Elecraft] KX1 tuning clicks   Geoff Cottrell
  • [Elecraft] KX1 tuning clicks   Ken Kirkley
• [Elecraft] Spectrograph and Filter Alignments   Lee Buller
• [Elecraft] Thank you   Kevin Rock
• [Elecraft] K2 #2768 is moving house   Peter Halpin
• [Elecraft] Fw: keyer problem etc   Rich Haendel
• [Elecraft] My turn !   [email protected]
• [Elecraft] K2 Current differences   Rich Haendel
• [Elecraft] K2 Sidetone   NZ8J
  • [Elecraft] K2 Sidetone   Ron D'Eau Claire
  • [Elecraft] K2 Sidetone   NZ8J
  • [Elecraft] K2 Sidetone   Bob Tellefsen
• [Elecraft] RUN FOR THE BACON   Jerry Ford
• [Elecraft] Use of flux.. and another rant on soldering   Tom Hammond
• [Elecraft] K2 Sidetone   [email protected]
• [Elecraft] K2 no transmit power   Rich Haendel
  • [Elecraft] K2 no transmit power   Don Wilhelm
• [Elecraft] K2 no transmit power   James T. "Jim" Rogers
• [Elecraft] mic bias   Ed Finn
  • [Elecraft] mic bias   George, W5YR
  • [Elecraft] mic bias   Don Wilhelm
• [Elecraft] K2 QRV from V73 this weekend   Jeffrey Parker
• [Elecraft] mic bias   Earl W Cunningham
• [Elecraft] little bit of information before I buy   MC
  • [Elecraft] little bit of information before I buy   Ron D'Eau Claire
• [Elecraft] I/O problems   William M. Spaulding, Sr.
  • [Elecraft] I/O problems   David Pratt
    • [Elecraft] re: XG1   Blake M. Meinecke
  • [Elecraft] I/O problems   Jack Brindle
• [Elecraft] K2 XG1 50uV Calibration Query   Nigel
  • [Elecraft] K2 XG1 50uV Calibration Query   Don Wilhelm
• [Elecraft] Nevermind   William M. Spaulding, Sr.
• [Elecraft] Re: Ham Radio Stores!   [email protected]
• [Elecraft] Help for HP 410B   N2TK
  • [Elecraft] Help for HP 410B   Stuart Rohre
• [Elecraft] K2 S/N 4023 saga   Rich Haendel
  • [Elecraft] K2 S/N 4023 saga   Don Wilhelm
• [Elecraft] KXAT1 Question   [email protected]
• [Elecraft] XG1   Wolf-Ruediger Juergens
• [Elecraft] K2 S/N 4023   Rich Haendel
  • [Elecraft] K2 S/N 4023   Don Wilhelm
• [Elecraft] Use of flux.. and another rant on solder   COLIN WHITMORE
• [Elecraft] #3628 Smoke Test.   Kevin B. G. Luxford
• [Elecraft] K2 S/N 4023 saga   James T. "Jim" Rogers
• [Elecraft] K2 S/N 4023 saga   James T. "Jim" Rogers
• [Elecraft] KX1 Resistor mods   Aron Brown
• [Elecraft] FS: K2 #3061 and accessories   Gil Bishop
• [Elecraft] K2 Saga continues   Rich Haendel
  • [Elecraft] Re: K2 S/N 4023 Saga   Rich Haendel
• [Elecraft] Problem with 40-Meter Transmitter Alignment   Dennie Mildfeldt
• [Elecraft] Kwajalein Atoll K2 to Elecraft operation   Ken N4SO
• [Elecraft] K2 (3956) and KAT1000 loss of signal   Burl
  • [Elecraft] K2 (3956) and KAT1000 loss of signal   Lee Buller
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
  • [Elecraft] Elecraft CW Net Announcement   Bert Craig
    • [Elecraft] Elecraft CW Net Announcement   Tom Hammond
• [Elecraft] K2 S/n 4023 High current all bands   Rich Haendel
• [Elecraft] OT FS: Griffin Powermate   Dave White
• [Elecraft] K1 FS: all options   [email protected]
• [Elecraft] K2 #3061   Gil Bishop
• [Elecraft] KX1 antenna testing   Aron Brown
• [Elecraft] K2 Saga   Rich Haendel
• [Elecraft] Frequency Reference   Richard Lim
  • [Elecraft] Frequency Reference   Ron D'Eau Claire
• [Elecraft] The Time Is Drawing Near   Jerry Ford
• [Elecraft] Griffin Powermate is sold   Dave White
• [Elecraft] Elecraft Net Report /1 February 15, 2004   Kevin Rock
• [Elecraft] question on licensing - extra   MC
  • [Elecraft] question on licensing - extra   Brad Hedges
  • [Elecraft] question on licensing - extra   Don Wilhelm
• [Elecraft] KAF 2 For Sale   Dane Morris
• [Elecraft] question on licensing - extra   [email protected]
• [Elecraft] question on licensing - extra   [email protected]
  • [Elecraft] question on licensing - extra   k8wbl
    • [Elecraft] question on licensing - extra   Tom Bosscher
  • [Elecraft] question on licensing - extra   Don Wilhelm
• [Elecraft] Fw: electronic equipment   gardner.cl
• [Elecraft] Elecraft Net Report/2 for February 16, 2004   Kevin Rock
  • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Bert Craig
    • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Kevin Rock
      • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Mychael Morohovich
      • [Elecraft] Too Many ECN Net Control Stations?   Ron D'Eau Claire
      • [Elecraft] Re: Too Many ECN Net Control Stations?   Kevin Rock
    • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Tom Hammond
      • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Kevin Rock
      • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Kevin Rock
• [Elecraft] Elecraft Net Report/2 for February 16, 2004   James T. "Jim" Rogers
  • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Douglas Westover
    • [Elecraft] Elecraft Net Report/2 for February 16, 2004   Ron D'Eau Claire
• [Elecraft] Elecraft Net Report/2 for February 16, 2004   Kevin Rock
• [Elecraft] question on licensing - extra   [email protected]
• [Elecraft] Re: Elecraft Net   Robert C. Abell
  • [Elecraft] Re: Elecraft Net   Kevin Rock
• FW: [Elecraft] question on licensing - extra   Dan Barker
• [Elecraft] K2 sn4011 is on the air !!!   [email protected]
• FW: [Elecraft] question on licensing - extra   [email protected]
• [Elecraft] Elecraft Net Report/2 for February 16, 2004   Earl W Cunningham
  • [Elecraft] Elecraft Net Report/2 for February 16, 2004   John Mahon
• [Elecraft] S/N 4016 K2 started   Russ Tobolic
• FW: [Elecraft] S/N 4016 K2 started   Dan Barker
• [Elecraft] USB to Serial Adapter with K2   Bob
• [Elecraft] KPA 100 HELP !   Raymond Phillips
• [Elecraft] Re: Elecraft Net   Robert C. Abell
• [Elecraft] No FL2, 3 or 4 SSB Filters Above 40 Meters   Ken Jones
  • [Elecraft] No FL2, 3 or 4 SSB Filters Above 40 Meters   Don Wilhelm
• FW: [Elecraft] KPA 100 HELP !   Masleid, Michael A.
• [Elecraft] electrolytic caps question   John Cooper
  • [Elecraft] electrolytic caps question   Stuart Rohre
• [Elecraft] K2 Speaker switch?   Jack Brindle
  • [Elecraft] K2 Speaker switch?   Don Wilhelm
    • [Elecraft] K2 Speaker switch?   Jack Brindle
  • [Elecraft] K2 Speaker switch?   Rich Lentz
  • [Elecraft] K2 Speaker switch?   Don Brown
• [Elecraft] Elecraft Net Report/2 for February 16, 2004   Earl W Cunningham
• [Elecraft] KSB2/KDSP2 setup   John Rader
• [Elecraft] electrolytic cap answered   John Cooper
• [Elecraft] too much output power   Ken K7ZUM
• [Elecraft] Setting MM-DD-YY on KDSP2   DAVE HEALY
• [Elecraft] too much output power & a little more info   Ken K7ZUM
• [Elecraft] too much output power   James T. "Jim" Rogers
• [Elecraft] V73GJ logs for weekend of 2/14-16   Jeffrey Parker
• [Elecraft] Re: question on licensing - extra   Mike McCoy
• [Elecraft] too much output power   Fletcher, Paul
  • [Elecraft] K2AT Blues!   bill linn
    • [Elecraft] K2AT Blues!   bill linn
• [Elecraft] re; Elecraft Net Report/2 for February 16, 2004   Mike McCoy
  • [Elecraft] Stealth! (was: net report...)   Vic Rosenthal
    • [Elecraft] Stealth! (was: net report...)   Jim Brown
      • [Elecraft] Stealth!   Vic Rosenthal
      • [Elecraft] Stealth!   Stuart Rohre
      • [Elecraft] Stealth! (was: net report...)   Ron D'Eau Claire
      • [Elecraft] Stealth! (was: net report...)   Jim Brown
      • [Elecraft] Stealth! (was: net report...)   Ron D'Eau Claire
      • [Elecraft] Stealth! (was: net report...)   Jim Brown
      • [Elecraft] Stealth! (was: net report...)   Don Wilhelm
      • [Elecraft] Stealth! (was: net report...)   Ron D'Eau Claire
• [Elecraft] K2 #61 XA to B in a day -- possible errata and manual comments   Bill Acito W1PA
• [Elecraft] L1 in KAT2   Pawlak, Daniel
  • [Elecraft] L1 in KAT2   Tom Hammond
• [Elecraft] RE:USB to Serial Adapter with K2   gamy
• [Elecraft] For Sale: W6MMA PW-1 portable vertical   dlrwild1
• [Elecraft] Samlex PSU SEC 1223   g3pjt
• [Elecraft] Re: KPA 100 Help!   Earl W Cunningham
• [Elecraft] L1 in KAT2   Pawlak, Daniel
• [Elecraft] k2dsp operation   Karin Johnson
  • [Elecraft] k2dsp operation   Dale Boresz
• [Elecraft] 160RX Not Recognized by MCU   Dean Maples
  • [Elecraft] 160RX Not Recognized by MCU   Sverre Holm
    • [Elecraft] 160RX Not Recognized by MCU   Jack Brindle
      • [Elecraft] 160RX Not Recognized by MCU   Sverre Holm
      • [Elecraft] 160RX Not Recognized by MCU   Jack Brindle
• FW: [Elecraft] Stealth! (was: net report...)   Dan Barker
• [Elecraft] K2:"Raspy" audio   James T. "Jim" Rogers
  • [Elecraft] K2:"Raspy" audio   Darrell Bellerive
• [Elecraft] k2dsp operation   wa7gxd
  • [Elecraft] K2 Software by N4PY   John Huffman
    • [Elecraft] K2 Software by N4PY   Vic Rosenthal
• FW: [Elecraft] Stealth!   Ron D'Eau Claire
• [Elecraft] FS K2/100   Tim Jones
• [Elecraft] K2:"Raspy" audio   James T. "Jim" Rogers
  • [Elecraft] K2:"Raspy" audio   Tony Fegan VE3QF
    • [Elecraft] K2:"Raspy" audio   Stuart Rohre
      • [Elecraft] Fabricating a mu metal shield -- Caution!   Francis Belliveau
• [Elecraft] D104 on K2..works great   James T. "Jim" Rogers
  • [Elecraft] D104 on K2..works great   John MacKenzie
• [Elecraft] UPDATE - K2 and KAT100 loss of receive signal strength   Burl
• [Elecraft] K2 microphone question   mike nelson
• [Elecraft] fs   [email protected]
• [Elecraft] Re: D104 - K2 Interface   James T. "Jim" Rogers
• [Elecraft] Stealth Antennas   Rick Dettinger
  • [Elecraft] Stealth Antennas   Ron D'Eau Claire
  • [Elecraft] Stealth Antennas   Stuart Rohre
• [Elecraft] Re: CW contact on 14/02/04   Robert C. Abell
• [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   James T. "Jim" Rogers
  • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Tom Hammond
    • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   John Cooper
      • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Trevor Jacobs
  • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Bob Myers
    • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   George, W5YR
      • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Ron D'Eau Claire
    • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Bob Nielsen
      • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Douglas Westover
      • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Stuart Rohre
• [Elecraft] verticals   Simon Lewis
  • [Elecraft] verticals   Howard Oakley
  • [Elecraft] verticals   KXBill
• [Elecraft] K2 Tuning Problem   Mark S. Adams, P.E.
• [Elecraft] N4PY software   Vic Rosenthal
• [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Ken Hunter
  • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Tom Hammond
    • [Elecraft] RE:whats a D104? Young whipper-snappers! :-)   Ken Hunter
• [Elecraft] K160RX Not Recognized by MCU   Dean Maples
• FW: [Elecraft] K160RX Not Recognized by MCU   Dan Barker
• [Elecraft] FOX & KX1   Ken Kirkley
• [Elecraft] control board part   John Cooper
• [Elecraft] FS; K2 and K1   Mark Perrin
• [Elecraft] RE:Old element in D104   James T. "Jim" Rogers
• [Elecraft] KX1   MC
• [Elecraft] k2dsp operation,problem resolved   Karin Johnson
• [Elecraft] K2/100-Sold   Tim Jones
• [Elecraft] 160rx not recognized by MCU   John.s.Griffin
• [Elecraft] N4PY K2 program New features?   Greg Fischer
  • [Elecraft] N4PY K2 program New features?   Don Wilhelm
    • [Elecraft] N4PY K2 program New features?   Carl Moreschi
• [Elecraft] Email address for list.   Jeff Burns
• [Elecraft] Any spare KAF2 out there   Greg Fischer
• [Elecraft] K160RX Not Recognized by MCU   Dean Maples
• [Elecraft] USB to Serial Adapter with K2   Numasaki Kazumi
• [Elecraft] DSP on 12 meters   Tim O'Rourke
  • [Elecraft] DSP on 12 meters   Vic Rosenthal
    • [Elecraft] DSP on 12 meters   Hank Kohl K8DD
• [Elecraft] A K2 Story!   Roger Stein
• [Elecraft] LCR Meter   Donnie Garrett
  • [Elecraft] LCR Meter   Mychael Morohovich
  • [Elecraft] LCR Meter   [email protected]
  • [Elecraft] LCR Meter   Tom Hammond
    • [Elecraft] LCR Meter   David A. Belsley
  • [Elecraft] LCR Meter   Bob Tellefsen
• [Elecraft] LCR Meter Suggestion   Dean Maples
• [Elecraft] N2CQ QRP Contest Calendar Feb 20-29, 2004   Ken Newman
• [Elecraft] FS:PSK31 interface wired for K2   Gil Bishop
• [Elecraft] Wanted: KSB2 and KIO2   Paul Ermisch
• [Elecraft] N4PY K2 Software   Joe Roof
• [Elecraft] LCR Meter   Earl W Cunningham
• [Elecraft] N4PY K2 Software   [email protected]
  • [Elecraft] N4PY K2 Software   Tom Hammond
• [Elecraft] Re: [Elecraft ]LCR Meter   Lonnie Juli
• [Elecraft] N4PY K2 Software   [email protected]
  • [Elecraft] N4PY K2 Software   Hank Kohl K8DD
    • [Elecraft] N4PY K2 Software   Jack Brindle
    • [Elecraft] was N4PY K2 Software, now Dot/PTT   BlakeM
• [Elecraft] N4PY K2 Software   James T. "Jim" Rogers
  • [Elecraft] N4PY K2 Software   Carl Moreschi
• FW: [Elecraft] N4PY K2 Software   Greg Fischer
  • [Elecraft] QSK vs semi-QSK (was N4PY K2 Software)   Don Wilhelm
    • [Elecraft] QSK vs semi-QSK (was N4PY K2 Software)   Donald Nesbitt
• [Elecraft] Re: K2 S/N 4031 comes to life   Robert C. Abell
• [Elecraft] nifty mini-mnualfor k2   [email protected]
• [Elecraft] peak atlas LCR Model LCR40   Roger Vaughan
• [Elecraft] OT WinMorse 2 - Directly converts text to CW audio files   Nigel
  • [Elecraft] K2AtoBMDKT Question   BlandRanch
• [Elecraft] k2 presentation   James T. "Jim" Rogers
  • [Elecraft] k2 presentation   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Is there an all-in-one calibration guide for the K2?   Bill Acito W1PA
  • [Elecraft] Is there an all-in-one calibration guide for the K2?   Bill Acito W1PA
• [Elecraft] RE:anyone have a power point program on the k2 I have been asked to come to the   James T. "Jim" Rogers
• [Elecraft] Is there an all-in-one calibration guide for the K2?   James T. "Jim" Rogers
• [Elecraft] KPA100   Nicholas R. Pascoe
• [Elecraft] KPA 100   [email protected]
• [Elecraft] K2: No power out. Emitter of Q6 is .,283V vice .4V   James T. "Jim" Rogers
• [Elecraft] K2AtoBMDKT Question   James T. "Jim" Rogers
• [Elecraft] QSK vs semi-QSK (was N4PY K2 Software)   VR2BrettGraham
• [Elecraft] RE:K2 mod question   James T. "Jim" Rogers
• [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Wayne Burdick
  • [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Rafael García
    • [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Trevor Day
      • [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Rafael García
  • [Elecraft] Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Bill Coleman
    • [Elecraft] Re: Elecraft K2 Upgrade: Keying Bandwidth Mod and New Firmware   Wayne Burdick
• [Elecraft] DX-1?   William M. Spaulding, Sr.
• [Elecraft] K2 and EV-638?   Mark Baugh
• [Elecraft] k2 firmware upgrades   Simon Lewis
• [Elecraft] K2 and EV-638?   James T. "Jim" Rogers
• [Elecraft] Firmware upgrade (long awaited)   PhilipTheis
  • [Elecraft] K2 Firmware: Details on new transverter features   Wayne Burdick
• [Elecraft] Elecraft K2 Upgrade: Questions   [email protected]
  • [Elecraft] Elecraft K2 Upgrade: Questions   Mychael Morohovich
  • [Elecraft] Re: Elecraft K2 Upgrade: Questions   Wayne Burdick
    • [Elecraft] Re: Elecraft K2 Upgrade: Questions   Elliott Lawrence
      • [Elecraft] Re: Elecraft K2 Upgrade: Questions   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Ordering from the UK?   Frank Hunter
• [Elecraft] RE: K2 presentation   Rick Tilton
• [Elecraft] Ordering from the UK?   Frank Hunter
• [Elecraft] RE: New mod kit???   Eddy Avila
  • [Elecraft] K2 keying mod details and circuit theory   Wayne Burdick
    • [Elecraft] K2 keying mod details and circuit theory   W B Reese
      • [Elecraft] Re: K2 keying mod details and circuit theory   Wayne Burdick
      • [Elecraft] K2 keying mod details and circuit theory   Vic Rosenthal
      • [Elecraft] K2 keying mod details and circuit theory   Tom Hammond
      • [Elecraft] K2 keying mod details and circuit theory   [email protected]
      • [Elecraft] K2 keying mod details and circuit theory   Trevor Day
      • [Elecraft] K2 keying mod details and circuit theory   Tom Hammond
      • [Elecraft] CFO   Sverre Holm
      • [Elecraft] K2 keying mod details and circuit theory   Joe - aa4nn
      • [Elecraft] K2 keying mod details and circuit theory   Vic Rosenthal
      • [Elecraft] K2 keying mod details and circuit theory   Tom Arntzen LA1PHA
      • [Elecraft] K2 keying mod details and circuit theory   W B Reese
• [Elecraft] Finally did it!   Lawrence Makoski
• Fw: [Elecraft] k2 firmware upgrades   Freek Emck
• [Elecraft] A KX1 in Austria yet?   Gert OE3ZK
• [Elecraft] New Keying Bandwidth Mod manual available   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] New Keying Bandwidth Mod manual available   Wolf-Ruediger Juergens
    • [Elecraft] New Keying Bandwidth Mod manual available   Tom Hammond
    • [Elecraft] New Keying Bandwidth Mod manual available   Vic Rosenthal
      • [Elecraft] New Keying Bandwidth Mod manual available   Guy Olinger, K2AV
    • [Elecraft] New Keying Bandwidth Mod manual available   Sverre Holm
    • [Elecraft] Keying mods and new firmware apply equally to K2 and K2/100   Wayne Burdick
      • [Elecraft] Keying mods and new firmware apply equally to K2 and K2/100   Wolf-Ruediger Juergens
    • [Elecraft] New Keying Bandwidth Mod manual available   Don Wilhelm
      • [Elecraft] New Keying Bandwidth Mod manual available   Vic Rosenthal
      • [Elecraft] New Keying Bandwidth Mod manual available   Mychael Morohovich
      • [Elecraft] Another urban legend: clicks needed for readability   Guy Olinger, K2AV
      • [Elecraft] Another urban legend: clicks needed for readability   Vic Rosenthal
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
  • [Elecraft] Elecraft CW Net Announcement   Jack Brindle
    • [Elecraft] Elecraft Voice Net   Kevin Rock
• [Elecraft] Elecraft K2 Upgrade: Questions   Earl W Cunningham
• [Elecraft] K2 DSP   Lonnie Juli
• [Elecraft] New K2 Mods... what's missing?   Lonnie Juli
• FW: [Elecraft] Elecraft Voice Net   Dan Barker
  • FW: [Elecraft] Elecraft Voice Net   Kevin Rock
• [Elecraft] Firmware upgrade (long awaited)   wa7gxd
• [Elecraft] K2 DSP   wa7gxd
• FW: [Elecraft] Elecraft Voice Net   [email protected]
• [Elecraft] "Hung" Auxbus?   William M. Spaulding, Sr.
• FW: FW: [Elecraft] Elecraft Voice Net   Dan Barker
  • FW: FW: [Elecraft] Elecraft Voice Net   Kevin Rock
• [Elecraft] No transmit on ssb on my K2   John MacKenzie
  • [Elecraft] No transmit on ssb on my K2   Don Wilhelm
• [Elecraft] k2 firmware upgrades   Don Melcher
• [Elecraft] Test (ignore me please)   Buddy Brannan
• [Elecraft] Fw: "Hung" Auxbus? --- Addendum   William M. Spaulding, Sr.
  • [Elecraft] Fw: "Hung" Auxbus? --- Addendum   Don Wilhelm
    • [Elecraft] Fw: "Hung" Auxbus? --- Addendum   Bill Echols
      • [Elecraft] Fw: "Hung" Auxbus? --- Addendum   Don Wilhelm
• [Elecraft] CW contest - lots of QRM - an a VK!!!   James T. "Jim" Rogers
  • [Elecraft] CW contest - lots of QRM - an a VK!!!   D.W. Harms PA2DW
    • [Elecraft] CW contest - lots of QRM - an a VK!!!   DAVID C. OLEAN
  • [Elecraft] CW contest - lots of QRM - an a VK!!!   Bob Nielsen
• [Elecraft] No transmit on ssb on my K2   James T. "Jim" Rogers
  • [Elecraft] No transmit on ssb on my K2   John MacKenzie
    • [Elecraft] No transmit on SSB on my K2   John MacKenzie
      • [Elecraft] No transmit on SSB on my K2   Don Wilhelm
• [Elecraft] K60XV question   John Rader
  • [Elecraft] Re: K60XV question [amp keying]   Wayne Burdick
• [Elecraft] Elecraft SSb Net   Dave White
  • [Elecraft] Elecraft SSb Net   Richard Lim
• [Elecraft] K2 S/N 4023   Rich Haendel
• [Elecraft] KXAT1 alignment help, please?   Lloyd Lachow
• [Elecraft] test   [email protected]
• [Elecraft] FS Superantennas PW-1   Rod N0RC
• [Elecraft] More FS Kenwood HS-5 Comm Headphones   Rod N0RC
• [Elecraft] Updated "Elecraft-QRV" website now online   Dale Boresz
• [Elecraft] Even MORE FS: American Morse Port-Paddle   Rod N0RC
• [Elecraft] FS: K2/100 with All Options   Scott Prather
• [Elecraft] K2 #3930 No RF Out   James T. "Jim" Rogers
• [Elecraft] Elecraft CW Net Announcement   Don Wilhelm
  • [Elecraft] Elecraft CW Net Announcement   Bob Nielsen
  • [Elecraft] Elecraft CW Net Announcement   Mike Harris
• [Elecraft] BL1 Balun   Steve Muncy
• [Elecraft] ARRL DX Contest   John
• [Elecraft] Unexpected absence.   Don Wilhelm
• [Elecraft] L/C Meter   Donnie Garrett
  • [Elecraft] L/C Meter   Tom Hammond
  • [Elecraft] L/C Meter   Mario Lorenz
• [Elecraft] 1st Week with K-2   Luther B. Phillips
• [Elecraft] FS K2/100 # 2497   Kent
• [Elecraft] Reading my DMM   [email protected]
  • [Elecraft] Reading my DMM   Trevor Day
  • [Elecraft] Reading my DMM   Stuart Rohre
• [Elecraft] question on the KX1 bands   MC
• [Elecraft] Wanted   MC
• [Elecraft] ARRL CW for G3PJT   g3pjt
  • [Elecraft] ARRL CW for G3PJT   Wolf-Ruediger Juergens
• [Elecraft] who makes the K2 Rotary Encoder   Mike W
  • [Elecraft] who makes the K2 Rotary Encoder   Kenneth E. Harker
• [Elecraft] New Keying Bandwidth Mod manual available   Martin
  • [Elecraft] New Keying Bandwidth Mod manual available   Tom Hammond
  • [Elecraft] New Keying Bandwidth Mod manual available   Ron D'Eau Claire
• FW: [Elecraft] Fw: "Hung" Auxbus? --- Addendum   Dan Barker
• FW: [Elecraft] Fw: "Hung" Auxbus? --- Addendum   Dan Barker
• [Elecraft] Ordering from the UK?   Peter Howson
  • [Elecraft] Ordering from the UK?   Frank Hunter
    • [Elecraft] Ordering from the UK?   Neill Taylor
  • [Elecraft] Ordering from the UK?   Nicholas R. Pascoe
  • [Elecraft] Ordering from the UK?   Nicholas R. Pascoe
  • [Elecraft] Ordering from the UK?   Kevin Danks
• [Elecraft] Re: Elecraft SSB Net   Robert C. Abell
• [Elecraft] re: Unexpected absence.   Mike McCoy
• [Elecraft] re: Another urban legend: clicks needed for readability   Mike McCoy
  • [Elecraft] re: Another urban legend: clicks needed for readability   Guy Olinger, K2AV
    • [Elecraft] re: Another urban legend: clicks needed for readability   Ron D'Eau Claire
      • [Elecraft] re: Another urban legend: clicks needed for readability   Jim Brown
• [Elecraft] 1st Week with K-2   Dave @ Interaccess.com
• [Elecraft] Interesting info about key clicks...   Dale Boresz
  • [Elecraft] Re: Interesting info about key clicks...   Wayne Burdick
    • [Elecraft] Re: Interesting info about key clicks... [typo]   Wayne Burdick
• [Elecraft] Re: FS K2/100 with all options   Robert C. Abell
• [Elecraft] Testing once again   Wayne K9DI
• [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Wayne Burdick
  • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Ron D'Eau Claire
• [Elecraft] Another urban legend: clicks needed for readability   Earl W Cunningham
  • [Elecraft] Another urban legend: clicks needed for readability   Vic Rosenthal
  • [Elecraft] How "clean" is a clean signal?   Ron D'Eau Claire
    • [Elecraft] How "clean" is a clean signal?   Richard Phillips
    • [Elecraft] How "clean" is a clean signal?   Jim Brown
    • [Elecraft] How "clean" is a clean signal?   bill linn
      • [Elecraft] How "clean" is a clean signal?   Blake M. Meinecke
      • [Elecraft] How "clean" is a clean signal?   Sam Binkley
• [Elecraft] CW contest - lots of QRM - an a VK!!!   [email protected]
• [Elecraft] 2.2 kHz K2 SSB Modification   Linden, Mike (BRC-Hes)
  • [Elecraft] 2.2 kHz K2 SSB Modification   Donald Nesbitt
• [Elecraft] XG1: low level output   Rafael García
• [Elecraft] Voltage Reference   Donnie Garrett
  • [Elecraft] Voltage Reference   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] LCR Meter   bill linn
    • [Elecraft] LCR Meter   Bob Tellefsen
      • [Elecraft] LCR Meter   Dan KB6NU
      • [Elecraft] LCR Meter   Vic Rosenthal
      • [Elecraft] LCR Meter   Stuart Rohre
  • [Elecraft] Voltage Reference   Ken Wagner
  • [Elecraft] Voltage Reference   Tom Hammond
• [Elecraft] CW Contest   Steven J Baumrucker, MD
• [Elecraft] KX1 Technical Talk at Atlanticon   Wayne Burdick
• [Elecraft] K2 #4037   Freek Emck
• [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Mike Morrow
  • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Augie Hansen
  • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Guy Olinger, K2AV
    • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   KI7V
      • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Ron D'Eau Claire
      • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   David Pratt
      • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Mike S
  • [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   George, W5YR
• [Elecraft] Another urban legend: (OT)   Mike Morrow
  • [Elecraft] Another urban legend: (OT)   George, W5YR
    • [Elecraft] Another urban legend: (OT)   Ron D'Eau Claire
• [Elecraft] Test Equipement Specials Hakko and BK Precision Protek   Evan Cirelli
  • [Elecraft] Test Equipement Specials Hakko and BK Precision Protek   Jim Brown
    • [Elecraft] Test Equipement Specials Hakko and BK Precision Protek   Tom Hammond
• [Elecraft] 1st Week with K-2   Alan Priestley
• [Elecraft] For sale in Europe - K2/100   C31LJ - Peter
• [Elecraft] K24U Transceiver RS-232 Control Software 1.0.0 Beta   Jerry
• [Elecraft] K24U Transceiver RS-232 Control Software 1.0.0 Beta   Jerry
• [Elecraft] How "clean" is a clean signal?   Mike Morrow
• [Elecraft] KX-1 Q6 and Power Questions   Brian Wruble
  • [Elecraft] KX-1 Q6 and Power Questions   Ron D'Eau Claire
  • [Elecraft] KX-1 Q6 and Power Questions   k4zm
• [Elecraft] How "clean" is a clean signal?   David A. Belsley
  • [Elecraft] How "clean" is a clean signal?   Rich Lentz
    • [Elecraft] How "clean" is a clean signal?   George, W5YR
      • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Trevor Jacobs
      • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] How "clean" is a clean signal?   Ron D'Eau Claire
    • [Elecraft] How "clean" is a clean signal? [End of thread]   Eric Swartz WA6HHQ - Elecraft
      • [Elecraft] How "clean" is a clean signal? [End of thread]   Tom Arntzen LA1PHA
    • [Elecraft] How "clean" is a clean signal?   David A. Belsley
• [Elecraft] How "clean" is a clean signal?   [email protected]
• [Elecraft] WAS   Jack Hubbard
• [Elecraft] Elecraft CW net freq?   Gwen & Jim Long
• [Elecraft] N6IJ Open House after Radiofest   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] RFC11 toroid install ?   Ted Holland
  • [Elecraft] RFC11 toroid install ?   Henry Gardiner
• [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Wayne Burdick
  • [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Jay Rutherford
    • [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Wayne Burdick
      • [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Bob Myers
      • [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Bud Rogers
    • [Elecraft] Elecraft artwork on-line (.AI); T-shirt/poster contest extended   Bruce Grubbs
• [Elecraft] Keying Bandwidth Mod and New 2.04 Firmware   Phil
  • [Elecraft] Re: Keying Bandwidth Mod and New 2.04 Firmware   Wayne Burdick
  • [Elecraft] Bandwidth mod, revised manual etc   Kevin Danks
• [Elecraft] ARRL CW G3YMC QRP   Dave Sergeant
• [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   [email protected]
  • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Kevin B. G. Luxford
    • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   David Olean
• [Elecraft] Re: (Elecraft) 2.2 kHz. K2 SSB mod   Robert C. Abell
• [Elecraft] Ordering from the UK?   Peter Howson
• [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   James T. "Jim" Rogers
• FW: [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   Dan Barker
• [Elecraft] KAF 2   Dane Morris
• [Elecraft] Keying Bandwidth Mod and New 2.04 Firmware   Bill Tippett
• [Elecraft] copying CW QRQ   Indy
  • [Elecraft] copying CW QRQ   Jim Brown
• [Elecraft] Wanted: KIO2   Paul Ermisch
• [Elecraft] K2 Rotary Encoder - Who wants one?   Bob Innes
• [Elecraft] KX1 #447 Lives, K2 #2646 rocks in it's 1st CW contest   Steve Holton
• [Elecraft] Re: Elecraft digest, Vol 4 #458 - 103 msgs   [email protected]
  • [Elecraft] Re:   Mychael Morohovich
• [Elecraft] How "clean" is a clean signal?   Earl W Cunningham
  • [Elecraft] How "clean" is a clean signal?   George, W5YR
• [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Earl W Cunningham
  • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Trevor Jacobs
• [Elecraft] Wanted: 'bare bones' K2   Matthew Kastigar
• [Elecraft] Morse code for "@" (prosign 'AC') -- radio interview   [email protected]
• [Elecraft] XG1: low level output   Rafael García
• [Elecraft] KX-1 Did I blow my final?   Brian Wruble
  • [Elecraft] KX-1 Did I blow my final?   Brian Wruble
• [Elecraft] KX-1 414 survives builder's brain cramp.   Brian Wruble
• [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Earl W Cunningham
  • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Trevor Jacobs
• [Elecraft] Why QRPers should HATE clicky rigs.   Guy Olinger, K2AV
  • [Elecraft] Why QRPers should HATE clicky rigs.   Jim Brown
• [Elecraft] K2 Dial Reading Lower Than Actual Frequency by 70 Hz   Dean Maples
• [Elecraft] K2/100 Operation in Tanzania   Patrick Dal Porto
  • [Elecraft] K2/100 Operation in Tanzania   James C. Hall, MD
• [Elecraft] EQP - Elecraft QSO Party, 3/13   [email protected]
  • [Elecraft] EQP: no software, pros and cons   Wayne Burdick
    • [Elecraft] EQP: no software, pros and cons   Douglas Westover
• [Elecraft] EQP-2004   [email protected]
  • [Elecraft] EQP-2004   Jack Brindle
• [Elecraft] New Keying Bandwidth Mod manual available   Martin
  • [Elecraft] New Keying Bandwidth Mod manual available   Ron D'Eau Claire
• FW: [Elecraft] K2 Dial Reading Lower Than Actual Frequency by 70 Hz   Dan Barker
  • [Elecraft] K2 Dial Reading Lower Than Actual Frequency by 70 Hz   Tom Arntzen LA1PHA
• [Elecraft] K2 with DXLab bridge problem.   Arato Andras
• [Elecraft] K2 with DXLab bridge problem.   Arato Andras
• [Elecraft] KAF 2 Sold   Dane Morris
• [Elecraft] RE: 2.2Khz SSB Mod   Dave White
• [Elecraft] TRANSISTOR EQUIVALENTS   Chris Page
• [Elecraft] re: Elecraft posting   [email protected]
• [Elecraft] Zero-beating with the KX1   [email protected]
• [Elecraft] Self Contained KDSP2   Ben Dalfen
  • [Elecraft] Self Contained KDSP2   Gregg Lengling
  • [Elecraft] Self Contained KDSP2   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] Why QRPers should HATE clicky rigs.   Masleid, Michael A.
• FW: [Elecraft] Why QRPers should HATE clicky rigs.   Dan Barker
• [Elecraft] 4044 lives!   Ian J Maude
• [Elecraft] KX1 on-line manual feature   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] Re: KX1 on-line manual feature   Wayne Burdick
• [Elecraft] 60 meters in your country?   Wayne Burdick
• [Elecraft] Click mod and firmware shipping?   Vic Rosenthal
  • [Elecraft] Click mod and firmware shipping?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Use-Model of the KDSP2   Bill Acito W1PA
  • [Elecraft] Use-Model of the KDSP2   Vic Rosenthal
    • [Elecraft] Use-Model of the KDSP2   Bill Acito W1PA
    • [Elecraft] Use-Model of the KDSP2   Mike W
• [Elecraft] ? on K2 received frequency pitch   Ted Holland
• [Elecraft] Use-Model of the KDSP2   wa7gxd
• FW: [Elecraft] ? on K2 received frequency pitch   Dan Barker
• [Elecraft] Has anyone actually placed the KPA100 external to the K2, i.e. in an EC2 enclosure?   James T. "Jim" Rogers
  • [Elecraft] Has anyone actually placed the KPA100 external to the K2, i.e. in an EC2 enclosure?   Bob Nielsen
• [Elecraft] K2 and Low residue solder   Mike W
  • [Elecraft] K2 and Low residue solder   Stuart Rohre
  • [Elecraft] K2 and Low residue solder   Bob Nielsen
• [Elecraft] ARRL DX CW   RAIMBAULT Christophe
• [Elecraft] Has anyone actually placed the KPA100 external to the K2, i.e   Bill Acito W1PA
• [Fwd: Re: [Elecraft] Click mod and firmware shipping?]   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] setting the exact read-out on the dial with the KX1   MC
• [Elecraft] K2 Cross-mode operation   John Webster
• [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Earl W Cunningham
• [Elecraft] Another K1 in Poland is alive (# 1792)   SP9NSV
• [Elecraft] Xtal fiter frequencies   Benny Aumala
• [Elecraft] Use of KPA 100 with other transceivers   Rolf G. Schroeder
• FW: [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Dan Barker
  • [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   George, W5YR
• [Elecraft] Use of KPA 100 with other transceivers   James T. "Jim" Rogers
• FW: [Elecraft] Do I need to upgrade my QRP-K2/ Clean Signals...   Earl W Cunningham
• [Elecraft] K2 Builder Alert: Rev F. Manual error   Wayne Burdick
• [Elecraft] EQP Software   Toby Deinhardt
  • [Elecraft] EQP Software   Larry - WA2DGD
    • [Elecraft] EQP Software   Toby Deinhardt
  • [Elecraft] Re: EQP Software   Wayne Burdick
    • [Elecraft] Re: EQP Software   Trevor Jacobs
  • [Elecraft] EQP Software   Donald Nesbitt
    • [Elecraft] EQP Software   Toby Deinhardt
      • [Elecraft] EQP Software   Donald Nesbitt
• [Elecraft] Microphone Jack Grounded?   John Huffman
  • [Elecraft] Microphone Jack Grounded?   David Pratt
    • [Elecraft] Microphone Jack Grounded?   John Huffman
• [Elecraft] N2CQ QRP Contest Calendar Mar 2004   Ken Newman
• [Elecraft] Re: EQP - Elecraft QSO Party, 3/13   Todd Fonstad
• [Elecraft] Harmonics on AMTOR FEC problem   Jack Shrawder
• [Elecraft] Low Power   Rich Haendel
• [Elecraft] EQP Software: GUI Beta Update   Toby Deinhardt
  • [Elecraft] EQP Software: GUI Beta Update   Joe - aa4nn
• [Elecraft] K2 Cross-mode operation   Lonnie Juli
• [Elecraft] Greater Baltimore Hamboree and Computerfest: anyone going?   Wayne Burdick
• [Elecraft] K2 and Low residue solder   Tom Hammond
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
• [Elecraft] Harmonics on AMTOR FEC problem   Len Koppl
• [Elecraft] Hex screw size for FT100 knob?   Mike McCoy
• [Elecraft] KDSP2 assembly question?   Glenn Maclean
  • [Elecraft] KDSP2 assembly question?   Joe - aa4nn
• [Elecraft] KDSP2 assembly question?   wa7gxd
• [Elecraft] N2CQ Contest Calendar Feb 28 - Mar 1, 2004   Ken Newman
• [Elecraft] DSP firmware   Vic Rosenthal
• [Elecraft] Microphone Jack Grounded?   Parker Buckley
  • [Elecraft] Microphone Jack Grounded?   John Huffman
• [Elecraft] Re: Hex screw size for FT100 knob?   Mike McCoy
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
• [Elecraft] USS Kidd Special Event - W5KID   James R Giammanco
• [Elecraft] soldering stations?.   [email protected]
  • [Elecraft] soldering stations?.   Kevin Danks
• [Elecraft] (no subject)   [email protected]
• [Elecraft] Re:( Elecraft) K2 cross-mode operation   Robert C. Abell
• [Elecraft] Keying Bandwidth Mod   [email protected]
• [Elecraft] Keying envelope   Rich Lim
• FW: [Elecraft] Keying envelope   Dan Barker
• [Elecraft] New QST Review of Elecraft KX1 now on web   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Keying Bandwidth Mod   Earl W Cunningham
  • [Elecraft] Keying Bandwidth Mod   Bob Myers
  • [Elecraft] Keying Bandwidth Mod   Vic Rosenthal
• [Elecraft] New toys! New toys! Wahoo!!!!   Buddy Brannan
  • [Elecraft] K2 accessibility, via the KRC2   Wayne Burdick
    • [Elecraft] K2 accessibility, via the KRC2   Jack Brindle
• [Elecraft] Keying Bandwidth Mod   [email protected]
• [Elecraft] DSP firmware   Vic Rosenthal
  • [Elecraft] DSP firmware   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Shaft Encoder   Gary Scott
  • [Elecraft] Shaft Encoder   Mike W
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
  • [Elecraft] K2 and Low residue solder   Buddy Brannan
  • [Elecraft] K2 and Low residue solder   Stuart Rohre
• [Elecraft] Keying Bandwidth Mod   Masleid, Michael A.
  • [Elecraft] 60 Hz RFI to rig   Stuart Rohre
  • [Elecraft] Keying Bandwidth Mod   Vic Rosenthal
• [Elecraft] KX1 birdie   Norm Havercroft
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
• [Elecraft] DSP firmware   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
  • [Elecraft] K2 and Low residue solder   Stuart Rohre
  • [Elecraft] K2 and Low residue solder   Don Brown
• [Elecraft] KX1 Birdie   John J. Lally
• [Elecraft] Elecraft K2 Upgrade: NewFirmware   Tom Mc
  • [Elecraft] Elecraft K2 Upgrade: NewFirmware   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] Elecraft K2 Upgrade: NewFirmware   Don Brown
• [Elecraft] Key Clicks?   Tom Mc
  • [Elecraft] Key Clicks?   Ron D'Eau Claire
• [Elecraft] K2 Q7/Q8 PA Base Bias   Dennie Mildfeldt
• [Elecraft] K2 A to B revisions   George Maier
• [Elecraft] Key Clicks?   [email protected]
• [Elecraft] Desoldering   Daryl E. Blycker
  • [Elecraft] Desoldering   Mike W
• [Elecraft] K2 and Low residue solder   James T. "Jim" Rogers
• [Elecraft] Re:Soldering stations   Eircom
  • [Elecraft] Re:Soldering stations   Trevor Day
• [Elecraft] Solder thread   Allen Ward
• [Elecraft] K2 in CQ 60m Contest   Augie Hansen
• [Elecraft] DSP Firmware   Don Melcher
• [Elecraft] Re: Elecraft digest, multicore solder   [email protected]
• [Elecraft] mic connector ground and MLA150 Amplifier   [email protected]
  • [Elecraft] MLA150 Amplifier   Blake Meinecke
• [Elecraft] RE: K2 Rotary Encoder - I repeat info!   Bob Innes
• [Elecraft] Shaft Encoder   Gary Scott
• [Elecraft] Key Clicks?   Earl W Cunningham
  • [Elecraft] Key Clicks?   David A. Belsley
    • [Elecraft] Key Clicks?   David Pratt
      • [Elecraft] Key Clicks?   Thom R. Lacosta
• [Elecraft] DSP Firmware   wa7gxd
• [Elecraft] SWR Bridge Null Adjustment (C1)   Joe - aa4nn
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Greetings From "Bonnie Scotland" Everyone...From A "Newbie"   Andy GM0NWI
• [Elecraft] Spurious signal after k2 click mod   Vic Rosenthal
  • [Elecraft] Spurious signal after k2 click mod   David A. Belsley
  • [Elecraft] Spurious signal after k2 click mod   David A. Belsley
  • [Elecraft] Spurious signal after k2 click mod   Dale Boresz
    • [Elecraft] Spurious signal after k2 click mod   Vic Rosenthal
      • [Elecraft] Spurious signal after k2 click mod   David A. Belsley
      • [Elecraft] Spurious signal after k2 click mod   Vic Rosenthal
      • [Elecraft] Spurious signal after k2 click mod   Mario Lorenz
      • [Elecraft] Spurious signal after k2 click mod   Vic Rosenthal
• [Elecraft] KIO2 Not answering or acting wierd   Lee Buller
  • [Elecraft] KIO2 Not answering or acting wierd - Solved!!!!!   Lee Buller
• [Elecraft] Greetings From "Bonnie Scotland" Everyone...From A "Newbie"   James T. "Jim" Rogers
• [Elecraft] Greetings From "Bonnie Scotland" Everyone...From A "Newbie"   Earl W Cunningham
• [Elecraft] Sidetone Sinewave mod and new key click mod   james conrad
  • [Elecraft] Sidetone Sinewave mod and new key click mod   David Pratt
• [Elecraft] Spurious signal after k2 click mod   Vic Rosenthal
  • [Elecraft] Spurious signal after k2 click mod   David A. Belsley
• [Elecraft] Capacitor Markings.   William M. Spaulding, Sr.
  • [Elecraft] Re: Capacitor Markings.   Ingo Meyer DK3RED
• [Elecraft] I'm new!   Yves Dussault
• [Elecraft] re: KIO2 Not answering or acting wierd   Mike McCoy
• [Elecraft] K2 Product Review/Key clicks?   Ken N4SO
• [Elecraft] solder makeup   [email protected]
• [Elecraft] KX1 TX offset   Band
  • [Elecraft] KX1 TX offset   David A. Belsley
• [Elecraft] KNB2 does not work on my power line noise   Roger Marrotte
  • [Elecraft] KNB2 does not work on my power line noise   Jim Brown
    • [Elecraft] KNB2 does not work on my power line noise   Gregg Lengling
  • [Elecraft] KNB2 does not work on my power line noise   Vic Rosenthal
  • [Elecraft] KNB2 does not work on my power line noise   Dale Boresz
  • [Elecraft] KNB2 does not work on my power line noise   Tom Hammond
    • [Elecraft] KNB2 does not work on my power line noise   Ron D'Eau Claire
  • [Elecraft] KNB2 does not work on my power line noise   David Olean
  • [Elecraft] KNB2 does not work on my power line noise   Bob Tellefsen
  • [Elecraft] KNB2 does not work on my power line noise   Douglas Westover
• [Elecraft] Key Clicks?   Michael E Dobson
• [Elecraft] RE: K2 Rotary Encoder - I repeat info!   Ken Miller, K6CTW
• [Elecraft] KNB2 does not work on my power line noise   [email protected]
• [Elecraft] Re: Spurious signal after k2 click mod   Vic Rosenthal
• [Elecraft] Re: KX1 TX offset   David A. Belsley
• [Elecraft] KX1 TX offset   Mike Morrow
• [Elecraft] KNB2 does not work on my power line noise   Mike Morrow
  • [Elecraft] KNB2 does not work on my power line noise   Ron D'Eau Claire
    • [Elecraft] KNB2 does not work on my power line noise   Vic Rosenthal
• [Elecraft] KNB2 does not work on my power line noise   Earl W Cunningham
• [Elecraft] Re: Capacitor Markings.   Ingo Meyer DK3RED
• [Elecraft] Key Click Mod Accomplished   Glenn Maclean
• [Elecraft] Elecraft Net Report for February 29, 2004   Kevin Rock
  • [Elecraft] Elecraft Net Report for February 29, 2004   Bill Echols
• [Elecraft] Net report errata page 1   Kevin Rock
• [Elecraft] Re: ECN   Kevin Rock
• [Elecraft] Elecraft Net Report for March 1, 2004   Kevin Rock

Last message date: Sun Feb 29 23:08:01 2004
Archived on: Mon Mar 22 18:18:41 2004

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...