[Elecraft] Elecraft K2 Upgrade: NewFirmware

Fri Feb 27 22:10:00 2004

Hi

Elecraft has always supplied the latest firmware at no charge if you buy =
a option that requires the upgrade. For example if you have an older =
firmware K2 and buy the KPA100 that required the newer firmware they =
have always supplied it at no charge when you buy the KPA100. If you are =
just upgrading the firmware only then you will need to buy it. As I =
understand it if you add the 60 meter/transverter module then the =
firmware is included as part of the option. If you can not wait for the =
60M/transverter option, you can go ahead and order the key click mod and =
firmware and Elecraft will credit you back for the firmware when the =
60M/transverter option comes out. Who else would do that for you?

Don Brown
KD5NDB

  ----- Original Message -----=20
  From: Tom Mc<mailto:[email protected]>=20
  To: Elecraft<mailto:[email protected]>=20
  Sent: Friday, February 27, 2004 7:50 PM
  Subject: Re: [Elecraft] Elecraft K2 Upgrade: NewFirmware

  Hi Gang,
    Bill makes a good point here.  Is there any one place that shows a
  chronology of the changes with each firmware upgrade?

  Also, at $44.00 a pop, it would seem more frugal to wait for a 'major'
  upgrade before replacing an otherwise functional chip.

  SNIP

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---