[Elecraft] K2 KAT2 and KBT2 and KIO2

[Tom Arntzen LA1PHA]

Hi again!
My K2 3829 is now fully loaded except k160rx that misses on relay.
Hope Scott will send that to me as fast as possible.
Anyway! I ran my first batterypowered qso on 80 meter and it worked FB =
down to OE-land.
The kat2 tuned as a test a 7 feet wire to 1,8:1 on 40 and 4,5:1 on =
80meter.
Not bad.
So a question maybe Wayne or Eric can answer.
My K2 is loaded with KSB2,KNB2,KBT2,KIO2,KAT2.
My current with preamp off , bar to spot and lcd day is 0,20 shown by =
the K2.
The batt mode is set in menu.
Am I going normal here or is to high?
Also Elecraft can add Swisslog as OK software regarding the KIO2.
It work fb when set to Kenwood.
73! Tom LA1PHA


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---