[Elecraft] Spurious signal after k2 click mod

Vic Rosenthal [email protected]
Sun Feb 29 10:49:01 2004


Dale Boresz wrote:

> On what frequency were you operating when the spurious signals were 
> observed?

14.026.  KT5X heard them down about 40 db from the main signal, about 
550 Hz on either side, at power levels of 5 to 100 watts (so it isn't 
related to the KPA100).  After our QSO, I confirmed their presence by 
transmitting into a dummy load while listening on my TS850s.  It was 
possible to hear them quite well when the signal was S9 on the TS850s.

I've since verified that the mod was done correctly, that D36 is not 
backwards, etc.  The thing that bothers me is that I can't be 100% sure 
I didn't have this problem before doing the mod.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco