[Elecraft] RE: K2 Rotary Encoder - I repeat info!

[Bob Innes]

  To Gary Scott

  Attached details for K2 Rotenc, which is a ball-bearing
type @ about $70.00, or alternatively the cheaper sleeve
type for about $26.00.
  If you are building up a synthesizer, as I have, & need a
rotenc, use a TEAC "floppy" disk drive stepper motor with a
brass knob on it, it works brilliantly on my DDS PIC driven
synthesizer. Cost me about $2.00 for motor, including the
pre-amp/pulse shaper components at a flea market.
  Talk to me - I have lots of info.

  Herewith details of where to get the info. on K2 rotenc,
from John Galaway. (most expensive item in the K2!!)

  I have attached the link to the encoders for your records.
For the EC202C (ball bearing), please use the following
link:

  http://www.cui.com/adtemplate.asp?invky=431133

  For the EC202A (sleeve bearing) please use the following
link:

  http://www.cui.com/adtemplate.asp?invky=386852

  John Galaway
  CUI, Inc
  Industrial Controls Sales Manager
  Toll Free:  800-275-4899x330
  Direct:  503-372-1275
  Fax:  503-372-1266
  email:  jgalaway@cui.com
  www.cui.com
  www.v-infinity.com

  Cheers,
  Bob.....ZS6RZ

  K2 Ser. # 2758


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.596 / Virus Database: 379 - Release Date:
26/02/2004


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---