[Elecraft] K2 transmitting ALC? Does it read backwards on the bar graph?

[Don Wilhelm]

Wirewrapping done with a proper wirewrapping tool is a very reliable method
of attaching wires.  At least 3 closely spaced turns are recommended to
provide a gas-tight connection.

OTOH, wirewrapping attempts WITHOUT the tool just will not be tight enough.

73,
Don W3FPR

----- Original Message ----- 
> ----------
> There's nothing wrong with wirewrapping.  Wirewrap connections actually
> have a lower resistance than  solder connections because more surface
> area of the wire makes contact with the pin.  If you try something else,
> a plug with jumpers is a far, far better option than soldering to the
> pins.