[Elecraft] K2 Rotary Encoder - Who wants one?

[Bob Innes]

To: "Mike W"

Attached details for K2 Rotec, which is a ball-bearing type
@ about $70.00, or alternatively the cheaper sleeve type for
about $26.00.
If you are building up a synthesizer, as I have, & need a
rotenc, use a TEAC "floppy" disk drive stepper motor with a
brass knob on it, it works brilliantly on my DDS PIC driven
synthesizer. Cost me about $2.00 for motor, including the
pre-amp/pulse shaper components at a flea market.
Talk to me - I have lots of info.

Herewith details of where to get the info. on K2 rotenc,
from John Galaway. (most expensive item in the K2!!)

I have attached the link to the encoders for your records.
For the EC202C (ball bearing), please use the following
link:

http://www.cui.com/adtemplate.asp?invky=431133

For the EC202A (sleeve bearing) please use the following
link:

http://www.cui.com/adtemplate.asp?invky=386852

John Galaway
CUI, Inc
Industrial Controls Sales Manager
Toll Free:  800-275-4899x330
Direct:  503-372-1275
Fax:  503-372-1266
email:  jgalaway@cui.com
www.cui.com
www.v-infinity.com

Cheers,
Bob.....ZS6RZ

K2 Ser. # 2758



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---