[Elecraft] xg-1 question

[John Cooper]

Im to the part where you measure resistance to ground at each of the =
points listed.  the junctions of the resistor and caps so far installed.

could someone give me an example of the junction of R7 and R8.  Where =
exactly do the probes go?  Across both I get the 50OHM which is good.  =
Does it matter, I put one probe on the right side of R7 and the other on =
the bottom of R8.  It was the same reading when I moved it to the top of =
R8.  Usually you put one probe on the ground loop in the k2 and to the =
component.  Im probably just thinking too much into this. =20

WT5Y  I promise you guys Im absorbing as much as I can as fast as I can.

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---