[Elecraft] k2 no transmit power

Sat Feb 7 14:53:00 2004

I want to let you all know that I have the k2 fixed and r50 was the problem
a 1.5 ohm resistor was keeping my hole rig from working so now back to the
fybo contest
----- Original Message ----- 
From: "David Schornak" <[email protected]>
To: "Elecraft" <[email protected]>
Sent: Monday, February 02, 2004 10:02 AM
Subject: [Elecraft] k2 no transmit power

my k2 seems to be dead on transmit but the receive is okay how can I
determine if it is the finals or some thing else? I have hooked my k2 up to
a watt meter with a dummy load and when I key down the watt meter does not
move at .1 watts power level. I can hear a carrier on my ts2000 on the same
frequency as the k2 when I key down with the same watt meter and dummy load
hooked up
on transmit q7 and q8 base voltage is .640 the collector voltage is 13.13
but there is no voltage on the emitter. so what else can I check before I
order new parts to fix my k2?
I also need to figure out what parts I need to order for the k2.

see ya

73's
N1IB
David Schornak

K2 03027

arf
don't forget me
Mis Ginger

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
Also see: http://www.elecraft.com/elecraft_list_guidelines.htm