[Elecraft] DSP on 12 meters

[Hank Kohl K8DD]

At 2/18/2004 10:19 PM, Vic Rosenthal wrote:

>Tim O'Rourke wrote:
>>When I am on 12 meters and select DSP menu with Display button I detect 
>>loud pulses while in this menu
>>Normal?
>
>Yes, when you are in the DSP or RTC menus you may hear auxbus traffic. 
>Since you never operate in this mode, it's not a problem.

But it's really neat to be able to listen to the changes you make as you 
make them - in my case it's usually screwing up the parameters.   I have 
had to go through everything a few times and go back to the defaults.
Anyhow ...... I got rid of the auxbus and computer ticks/pulses/noise by 
taking off the side panel and tucking the ribbon cable up against the top 
plate.  On mine it is stuffed up between the plug and the front of the 
KPA100 and as far away from the main board as I can get it.
This worked on both K2/100's (one with DSP and one with an audio filter).
73    Hank    K8DD