[Elecraft] Spurious signal after k2 click mod

[Vic Rosenthal]

David A. Belsley wrote:

> I take it back, Vic:  I said in my prior message it is hard to see how a 
> mod to the control board could affect the RF, but, of course, there is 
> also the change in D36 on the RF board.  And that part is in the link 
> between the BFO and the Xmit Mixer.  What is the reason for the change 
> in D36?

I am not sure, but I checked that I inserted it in the right direction, 
and measured its forward voltage drop at about 0.65v, so it is probably 
not the cause of the problem.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco