[Elecraft] K2 S/N 4023

[Rich Haendel]

Continuing Saga of K2 SN 4023=20
I found out problem about short transmit pulses.  I SENSE was tripping ( =
U3A and Q11)  because the 12 volt line was dropping.  My power supply is =
rated for 3.6 amps.   I shorted the current sense resistor in my power =
supply, K2 now display reads Hi Curr,   value is 5.21 amps.  I am not =
getting the 20 millisecond burst any more.  I get the proper sidetone =
when I key.  Now I need to find out why the K2 is drawing so much =
current.  Power level is set to 1 watt.  I am continuing

Rich Haendel
W3ACO=20




--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---