2003-April Archives by Author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Apr 1 00:20:02 2003
Ending: Wed Apr 30 23:51:41 2003
Messages: 656

• [TheForge] Coherex   Mondloch
• [TheForge] Off Topic / satellite internet connection / YAK   Wayne Ackman
• [TheForge] twisted wire websites?   Doug Ayen
• [TheForge] tire roller   Ray Baker
• [TheForge] Historical type Forge   Ray Baker
• [TheForge] Whitaker's Cookbook   D.E. Barnes
• [TheForge] The Philosophy of Fire (was Ah kin spel betr'n'u)   D.E. (Donn) Barnes
• [TheForge] A small score - railroad spikes.   Dave Belfer-Shevett
• [TheForge] A small score - railroad spikes.   Dave Belfer-Shevett
• [TheForge] A small score - railroad spikes.   Dave Belfer-Shevett
• [TheForge] Woop! RR Spikes, stage 2.   Dave Belfer-Shevett
• [TheForge] Re: reverse electrolysis   Dave Belfer-Shevett
• [TheForge] Book recommendations?   Dave Belfer-Shevett
• [TheForge] angle smiths   Blacksmith
• [TheForge] Fw: Side Draft   Blacksmith
• [TheForge] Hammer-in   Blacksmith
• [TheForge] more gas (the propane kind)   Steve Bloom
• [TheForge] Knife List   Bowie
• [TheForge] gas forge design   Bowie
• [TheForge] Fwd: Re: ALPLAZ-04   D G Brown
• [TheForge] Power hammer questions   Dave Brown
• [TheForge] bandsaw blades and grinding discs/belts   Dave Brown
• [TheForge] Re: odd belts   Dave Brown
• [TheForge] Money request from qth.net   Dave Brown
• [TheForge] Re: Bandsaw Blades   Dave Brown
• [TheForge] Re: odd belts   Dave Brown
• [TheForge] Small runs of castings - sources?   Dave Brown
• [TheForge] Small runs of castings - sources?   Dave Brown
• [TheForge] Small runs of castings - sources?   Dave Brown
• [TheForge] Re: [GoM] Jacobs Chucks   Dave Brown
• [TheForge] Daylight Savings time ... USA   Dave Brown
• [TheForge] words   Dave Brown
• [TheForge] words   Dave Brown
• [TheForge] Earthlink.com Subscriber problems   Dave Brown
• [TheForge] angle smiths   Dave Brown
• [TheForge] Re: reverse electrolysis   Dave Brown
• [TheForge] Fun Day   Dave Brown
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Dave Brown
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Dave Brown
• [TheForge] waste vegetable oil burners   Dave Brown
• [TheForge] Fw: Waste Oil heater   Dave Brown
• [TheForge] RE; Hoffi style / was Anvil stands, was, was, was.....   Dave Brown
• [TheForge] RE; Hoffi style / was Anvil stands, was, was, was.....   Dave Brown
• [TheForge] LG Repairs   Larry Brown
• [TheForge] Little Giant Book   Larry Brown
• [TheForge] Old Air Tool Help ?   Larry and Pat Brown
• [TheForge] Joyous News!   Larry and Pat Brown
• [TheForge] YAK   Larry and Pat Brown
• [TheForge] Weldors Block   Larry and Pat Brown
• [TheForge] Old Anvils   Larry and Pat Brown
• [TheForge] was Air Hammer Slides.....   Larry and Pat Brown
• [TheForge] LG Repairs   Larry and Pat Brown
• [TheForge] Money request from qth.net   Gabriel Cain
• [TheForge] pitted anvil   Gabriel Cain
• [TheForge] Off Topic / satellite internet connection / YAK   Gabriel Cain
• [TheForge] anvil construction   Gabriel Cain
• [TheForge] anvils   Gabriel Cain
• [TheForge] anvils   Gabriel Cain
• [TheForge] anvils   Gabriel Cain
• [TheForge] Anvil stands plus anvil for sale...   Gabriel Cain
• [TheForge] words   Ralph & Charlaine
• [TheForge] words   Ralph & Charlaine
• [TheForge] pitted anvil   John Chobrda
• [TheForge] words   April and Bill Clemens
• [TheForge] Dogwood Blossom   April and Bill Clemens
• [TheForge] Swedge block question   April and Bill Clemens
• [TheForge] Swedge block question   April and Bill Clemens
• [TheForge] weld question   April and Bill Clemens
• [TheForge] Swedge block question   April and Bill Clemens
• [TheForge] farm museum in Maryland?   April and Bill Clemens
• [TheForge] Chasing and engraving   Rick Crawford
• [TheForge] Joyous News!   Rick Crawford
• [TheForge] Chasing and engraving   Rick Crawford
• [TheForge] Fw: [EK-Equine] Trailering question....   Rick Crawford
• [TheForge] Spectroscope <== Sent by mistake, Sorry   Rick Crawford
• [TheForge] bandsaw blades and grinding discs/belts   Daniel Crowther
• [TheForge] My challenge for the month   Daniel Crowther
• [TheForge] Double messages   Darrell
• [TheForge] angle smiths   Roger R Degner
• [TheForge] LG Repairs   Roger R Degner
• [TheForge] Cookbook   George Dixon
• [TheForge] Re: wooden wedges   George Dixon
• [TheForge] Re: wooden wedges   George Dixon
• [TheForge] Pet peeves (YAK)   George Dixon
• [TheForge] RE; Hoffi style / was Anvil stands, was, was, was.....   George Dixon
• [TheForge] RE; Hoffi style / was Anvil stands, was, was, was.....   George Dixon
• [TheForge] Lathe info needed   Doug Douglas
• [TheForge] pitted anvil   Ralph E Douglass
• [TheForge] My challenge for the month   Ralph E Douglass
• [TheForge] My challenge for the month   Ralph E Douglass
• [TheForge] My challenge for the month   Ralph E Douglass
• [TheForge] My challenge for the month   Ralph E Douglass
• [TheForge] challenge for the month   Douglass, Ralph E
• [TheForge] challenge for the month   Ralph E Douglass
• [TheForge] Historical type Forge   Ralph E Douglass
• [TheForge] insurance   DragonsWatch
• [TheForge] Spectroscope   Albin F. Drzewianowski
• [TheForge] Spectroscope <== Sent by mistake, Sorry   Albin F. Drzewianowski
• [TheForge] RE: Old Anvils/ schooling   Bob Ehrenberger
• [TheForge] Coherex   Bob Ehrenberger
• [TheForge] B1 Beverly Shear- 14g cutting   Bob Ehrenberger
• [TheForge] New tool   Bob Ehrenberger
• [TheForge] Hydraulic Forging Press   Bob Ehrenberger
• [TheForge] Lathe info needed   Bob Ehrenberger
• [TheForge] Lathe info needed   Bob Ehrenberger
• [TheForge] gas forge design   Bob Ehrenberger
• [TheForge] Big mistake   Bob Ehrenberger
• [TheForge] RE: Welding   Bob Ehrenberger
• [TheForge] weld question   Bob Ehrenberger
• [TheForge] Historical type Forge   Bob Ehrenberger
• [TheForge] RE; Hoffi style / was Anvil stands   Bob Ehrenberger
• [TheForge] Fw: Waste Oil heater   Bob Ehrenberger
• [TheForge] angle smiths   Rick & Kims Email
• [TheForge] Blower fan search   Rick & Kims Email
• [TheForge] re:anvils   John Emmerling
• [TheForge] hydraulics   Ed F
• [TheForge] Hydraulic Forging Press   Ed F
• [TheForge] hydraulics   Ed F
• [TheForge] Hydraulic Forging Press   Ed F
• [TheForge] chinese ASOs   Gladish Family
• [TheForge] words   Gladish Family
• [TheForge] Thank you   Gladish Family
• [TheForge] weld question   Gladish Family
• [TheForge] Refacing old anvils?   Kevin Farinholt
• [TheForge] Joyous News!   Rob Fertner
• [TheForge] buying a new anvil (was: pitted anvil)   Rob Fertner
• [TheForge] words   Rob Fertner
• [TheForge] Historical type Forge   Rob Fertner
• [TheForge] Historical type Forge   H and P Foster
• [TheForge] Historical type Forge   H and P Foster
• [TheForge] chinese ASOs   Bruce Freeman
• [TheForge] Arched Window Curtain Rods   Bruce Freeman
• [TheForge] How to black wroght iron finish?   Bruce Freeman
• [TheForge] Hydraulic Forging Press   Bruce Freeman
• [TheForge] twisted wire websites?   Bruce Freeman
• [TheForge] weld question   Bruce Freeman
• [TheForge] Blower fan search   Bruce Freeman
• [TheForge] farm museum in Maryland?   Bruce Freeman
• [TheForge] Book recommendations?   Bruce Freeman
• [TheForge] Re: TheForge digest, Vol 4 #221 - 8 msgs   Jerry Frost
• [TheForge] chinese ASOs   Jerry Frost
• [TheForge] Weldors Block   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions/Frosty   Jerry Frost
• [TheForge] Power hammer questions - Bob   Jerry Frost
• [TheForge] Re: B1 Beverly Shear- 14g cutting   Jerry Frost
• [TheForge] gas forge design   Jerry Frost
• [TheForge] gas forge design   Jerry Frost
• [TheForge] gas forge design   Jerry Frost
• [TheForge] gas forge design   Jerry Frost
• [TheForge] Pet peeves (YAK)   Jerry Frost
• [TheForge] anvils   Jerry Frost
• [TheForge] Historical type Forge   Jerry Frost
• [TheForge] anvils   Jerry Frost
• [TheForge] Historical type Forge   Jerry Frost
• [TheForge] Historical type Forge   Jerry Frost
• [TheForge] NEW - weld question   G.Watts
• [TheForge] Refacing old anvils?   GHS
• [TheForge] Refacing old anvils?   GHS
• [TheForge] Fw: [EK-Equine] Trailering question....   GHS
• [TheForge] Thank you   GHS
• [TheForge] Thank you   GHS
• [TheForge] LG Repairs   GHS
• [TheForge] My challenge for the month   GHS
• [TheForge] My challenge for the month   GHS
• [TheForge] My challenge for the month   GHS
• [TheForge] gas forge design   GHS
• [TheForge] insurance   GHS
• [TheForge] Blower fan search   TOOL GYPSY
• [TheForge] Historical type Forge   Franklyn D. Garland
• [TheForge] words   Marc Godbout
• [TheForge] weld question   Dan Hayes
• [TheForge] Fw: [EK-Equine] Trailering question....   Paul Hewitt
• [TheForge] Air Hammers   Paul Hewitt
• [TheForge] Air Hammers Paul   Paul Hewitt
• [TheForge] Air Hammers Paul   Paul Hewitt
• [TheForge] Re: Air Hammers Paul   Paul Hewitt
• [TheForge] Re: smoothing hammer guides   Paul Hewitt
• [TheForge] Delrin hammer guides?   Paul Hewitt
• [TheForge] Re: Air Hammers Paul   Paul Hewitt
• [TheForge] Brand New Topic-Stainless Pans   Paul Hewitt
• [TheForge] Re: smoothing hammer guides   Paul Hewitt
• [TheForge] Air Hammer Slides.....   Paul Hewitt
• [TheForge] Air Hammer Slides.....   Paul Hewitt
• [TheForge] was Air Hammer Slides.....   Paul Hewitt
• [TheForge] Re: camfollowers   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] gas forge design   Paul Hewitt
• [TheForge] more gas (the propane kind)   Paul Hewitt
• [TheForge] internship available now   Helmut Hillenkamp
• [TheForge] Old Air Tool Help ?   Michael Horgan
• [TheForge] Thank you   Michael Horgan
• [TheForge] gas forge design   Michael Horgan
• [TheForge] Air Hammers   Ian
• [TheForge] Photo Access Site   Ian
• [TheForge] Air Hammers Paul   Ian
• [TheForge] Air Hammers Paul   Ian
• [TheForge] For Sale Items (power hammers)   Ian
• [TheForge] Power Hammers For Sale   Ian
• [TheForge] For Sale Items (power hammers)   Ian
• [TheForge] Power Hammers For Sale   Ian
• [TheForge] Hammer Anvil Materials   Ian
• [TheForge] Brand New Topic-Stainless Pans   Ian
• [TheForge] Power hammer questions - Bob   Ian
• [TheForge] Shop Cranes vs Floor Hoists   Ian
• [TheForge] A small score - railroad spikes. Dave   Ian
• [TheForge] A small score - railroad spikes.   Ian
• [TheForge] Re: Words   Michael Kaiser
• [TheForge] Refacing old anvils?   Kevin
• [TheForge] Joyous News!   Chris Kilpatrick
• [TheForge] words   Chris Kilpatrick
• [TheForge] Arched Window Curtain Rods   Chris Kilpatrick
• [TheForge] My challenge for the month   Chris Kilpatrick
• [TheForge] words   Sheldon Laing
• [TheForge] steel idntification   Sheldon Laing
• [TheForge] twisted wire websites?   Sheldon Laing
• [TheForge] gas forge design   Sheldon Laing
• [TheForge] more gas (the propane kind)   Sheldon Laing
• [TheForge] Knife List   Mike Linn
• [TheForge] Thank you   Mike Linn
• [TheForge] Power hammer questions/Frosty   Mike Linn
• [TheForge] Small Blower and other things   Mike Linn
• [TheForge] Small Blower and other things   Mike Linn
• [TheForge] Small Blower and other things   Mike Linn
• [TheForge] Small Blower and other things   Mike Linn
• [TheForge] angle smiths   Mike Linn
• [TheForge] Cool Tool   Mike Linn
• [TheForge] more gas (the propane kind)   Mike Linn
• [TheForge] anvils   Mike Linn
• [TheForge] Anvil stands plus anvil for sale...   Mike Linn
• [TheForge] Anvil stands plus anvil for sale...   Mike Linn
• [TheForge] RE: Book recommendations? Norm LArson   Mike Linn
• [TheForge] Great Quote ...OT...(YAK) etc..etc...   Mike Linn
• [TheForge] Historical type Forge   Al McClure
• [TheForge] My challenge for the month   P. McComb
• [TheForge] Historical type Forge   P. McComb
• [TheForge] Not that I'm cackling or anything.....   P. McComb
• [TheForge] Sanding Belts and Custom Bandsaw Blades   Stephen McGehee
• [TheForge] Sanding Belts and Custom Bandsaw Blades   Stephen McGehee
• [TheForge] Trailers   Stephen McGehee
• [TheForge] Brand New Topic-Stainless Pans   Stephen McGehee
• [TheForge] The Philosophy of Fire (was Ah kin spel betr'n'u)   Stephen McGehee
• [TheForge] Anvil stands   Stephen McGehee
• [TheForge] 12th. Annual Ozark Conference, Warrenton Mo.   Stephen McGehee
• [TheForge] Money request from qth.net   Carlton McKenney
• [TheForge] Money request from qth.net   Carlton McKenney
• [TheForge] insurance   Carlton McKenney
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Mike McKim
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Mike McKim
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Mike McKim
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   Mike McKim
• [TheForge] Historical type Forge   Mike McKim
• [TheForge] Historical type Forge   Mike McKim
• [TheForge] Historical type Forge   Mike McKim
• [TheForge] Shop Cranes vs Floor Hoists   The Millers
• [TheForge] sorta OT- "Choppers" motocycle shop tv show   The Millers
• [TheForge] stainless steel rivets   Catherine Jo Morgan
• [TheForge] Blacksmith's Cookbook   Catherine Jo Morgan
• [TheForge] Coherex   Catherine Jo Morgan
• [TheForge] beverly shear   Catherine Jo Morgan
• [TheForge] oil-wax finish   Catherine Jo Morgan
• [TheForge] ABANA insurance via Mike Romeo   Catherine Jo Morgan
• [TheForge] bandsaw blades and grinding discs/belts   RIES NIEMI
• [TheForge] stainless steel rivets   RIES NIEMI
• [TheForge] Brand New Topic-Stainless Pans   RIES NIEMI
• [TheForge] Shop Cranes vs Floor Hoists   RIES NIEMI
• [TheForge] Re: mis-aligned dies   RIES NIEMI
• [TheForge] Re: wooden wedges   RIES NIEMI
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   RIES NIEMI
• [TheForge] sorta OT- "Choppers" motocycle shop tv show   RIES NIEMI
• [TheForge] insurance   RIES NIEMI
• [TheForge] My challenge for the month   John Newman
• [TheForge] Fw: Side Draft   Dick Nietfeld
• [TheForge] Historical type Forge   Dick Nietfeld
• [TheForge] Re: Bandsaw Blades   Roger Olsen
• [TheForge] Re: Bandsaw Blades   Roger Olsen
• [TheForge] Re: Anvils   Peter Fels And Phoebe Palmer
• [TheForge] Re: TheForge digest, Vol 4 #221 - 8 msgs   Peter Fels And Phoebe Palmer
• [TheForge] Re: Anvils   Peter Fels And Phoebe Palmer
• [TheForge] internship available now   Peter Fels And Phoebe Palmer
• [TheForge] gas forge design   Peter Fels And Phoebe Palmer
• [TheForge] Anvil stands   Peter Fels And Phoebe Palmer
• [TheForge] Re: Anvil stands   Peter Fels And Phoebe Palmer
• [TheForge] Fw: Waste Oil heater   Peter Fels And Phoebe Palmer
• [TheForge] pitted anvil   Mark Pesetsky
• [TheForge] Thank you   Mark Pesetsky
• [TheForge] Small Blower and other things   Mark Pesetsky
• [TheForge] Small Blower and other things   Mark Pesetsky
• [TheForge] twisted wire websites?   Mark Pesetsky
• [TheForge] more gas (the propane kind)   Mark Pesetsky
• [TheForge] NEW - weld question   Mark Pesetsky
• [TheForge] Book recommendations?   Alix Peshette
• [TheForge] For Sale Items (power hammers)   Phil
• [TheForge] affiliate for Richmond, VA area   Phil
• [TheForge] Book recommendations?   Phil
• [TheForge] Chasing and engraving   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Fw: [EK-Equine] Trailering question....   Phlip
• [TheForge] Daylight Savings time ... USA   Phlip
• [TheForge] words   Phlip
• [TheForge] A small score - railroad spikes.   Phlip
• [TheForge] My challenge for the month   Phlip
• [TheForge] Swedge block question   Phlip
• [TheForge] weld question   Phlip
• [TheForge] Big mistake   Phlip
• [TheForge] Historical type Forge   Phlip
• [TheForge] Historical type Forge   Phlip
• [TheForge] Not that I'm cackling or anything.....   Phlip
• [TheForge] insurance   Phlip
• [TheForge] Anvil stands   Phlip
• [TheForge] Anvil stands plus anvil for sale...   Phlip
• woodworking in order to smith- was Re: [TheForge] Anvil stands plus anvil for sale...   Phlip
• [TheForge] Not that I'm cackling or anything.....   Phlip
• [TheForge] ABANA insurance via Mike Romeo   Phlip
• [TheForge] Historical type Forge   Phlip
• [TheForge] Historical type Forge   Phlip
• [TheForge] Historical type Forge   Phlip
• [TheForge] Re: Bandsaw Blades   R.C.Mundt
• [TheForge] Re: odd belts   R.C.Mundt
• [TheForge] Fw: [EK-Equine] Trailering question....   R.C.Mundt
• [TheForge] Re: smoothing hammer guides   R.C.Mundt
• [TheForge] Power hammer questions/Frosty   R.C.Mundt
• [TheForge] angle smiths   R.C.Mundt
• [TheForge] angle smiths   R.C.Mundt
• [TheForge] Fw: Side Draft   R.C.Mundt
• [TheForge] gas forge design   R.C.Mundt
• [TheForge] Swedge block question   R.C.Mundt
• [TheForge] weld question   R.C.Mundt
• [TheForge] Historical type Forge   R.C.Mundt
• [TheForge] Blower fan search   R.C.Mundt
• [TheForge] CoSira Catalogue of Drawings (RW)   RW
• [TheForge] buying a new anvil (was: pitted anvil)   Bob Rackers
• [TheForge] QuadState Roundup 2003   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] Swedge block question   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] Double messages   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] Double messages   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] Re: original swage block question   Bob Rackers
• [TheForge] weld question   Bob Rackers
• [TheForge] Re:half-round with a hard right angle bend   Bob Rackers
• [TheForge] Re: original swage block question   Bob Rackers
• [TheForge] Re: original swage block question   Bob Rackers
• [TheForge] Historical type Forge   Bob Rackers
• [TheForge] Historical type Forge   Bob Rackers
• [TheForge] Historical type Forge   Bob Rackers
• [TheForge] RE; Hoffi style / was Anvil stands, was, was, was.....   Bob Rackers
• [TheForge] My challenge for the month   Ralph
• [TheForge] Pet peeves (YAK)   Ralph
• [TheForge] insurance   Ralph
• [TheForge] Small runs of castings - sources?   Dan Rathburn
• [TheForge] Fw: [EK-Equine] Trailering question....   Dan Rathburn
• [TheForge] buying a new anvil (was: pitted anvil)   Reynolds
• [TheForge] How to black wroght iron finish?   Reynolds
• [TheForge] weld question   Reynolds
• [TheForge] Historical type Forge   Reynolds
• [TheForge] Book recommendations?   Reynolds
• [TheForge] gas forge design   Todd Rich
• [TheForge] gas forge design   Todd Rich
• [TheForge] gas forge design   Todd Rich
• [TheForge] FABA conference   Patty Draper/Bill Robertson
• [TheForge] Refacing old anvils?   Chuck Robinson
• [TheForge] Shop Cranes vs Floor Hoists   Chuck Robinson
• [TheForge] Shop Cranes vs Floor Hoists   Chuck Robinson
• [TheForge] hydraulics   Chuck Robinson
• [TheForge] hydraulics   Chuck Robinson
• [TheForge] gas forge design   Chuck Robinson
• [TheForge] weld question   Chuck Robinson
• [TheForge] Fw: [EK-Equine] Trailering question....   Dan Scheid
• [TheForge] Fw: [EK-Equine] Trailering question....   Dan Scheid
• [TheForge] Fw: [EK-Equine] Trailering question....   Dan Scheid
• [TheForge] Fw: [EK-Equine] Trailering question....   Dan Scheid
• [TheForge] anvils   Aaron Silver
• [TheForge] Chasing and engraving   Fiorini & Skiles
• [TheForge] bandsaw blades and grinding discs/belts   Fiorini & Skiles
• [TheForge] angle smiths   Fiorini & Skiles
• [TheForge] B1 Beverly Shear- 14g cutting   Fiorini & Skiles
• [TheForge] Blacksmith's Cookbook   Fiorini & Skiles
• [TheForge] sorta OT- "Choppers" motocycle shop tv show   Fiorini & Skiles
• [TheForge] affiliate for Richmond, VA area   Fiorini & Skiles
• [TheForge] affiliate for Richmond, VA area   Fiorini & Skiles
• [TheForge] farm museum in Maryland?   Fiorini & Skiles
• [TheForge] Refacing old anvils?   Steve Smith
• [TheForge] Auction web page is up   Steve Smith
• [TheForge] Auction web page is up   Steve Smith
• [TheForge] Daylight Savings time ... USA   Steve Smith
• [TheForge] Re: smoothing hammer guides   Steve Smith
• [TheForge] Power hammer questions/Frosty   Steve Smith
• [TheForge] Power hammer questions/Frosty   Steve Smith
• [TheForge] Power hammer questions/Frosty   Steve Smith
• [TheForge] Re: Shop Cranes vs Floor Hoists   Steve Smith
• [TheForge] Whitaker's Cookbook   Steve Smith
• [TheForge] Hydraulic Forging Press   Steve Smith
• [TheForge] Fly Press stand   Steve Smith
• [TheForge] more gas (the propane kind)   Steve Smith
• [TheForge] Swedge block question   Steve Smith
• [TheForge] more gas (the propane kind)   Steve Smith
• [TheForge] Swedge block question   Steve Smith
• [TheForge] Swedge block question   Steve Smith
• [TheForge] Big mistake   Steve Smith
• [TheForge] twisted wire websites?   Steve Smith
• [TheForge] weld question   Steve Smith
• [TheForge] Power hammer questions/Frosty   Bob Smolen
• [TheForge] Power hammer questions/Frosty   Bob Smolen
• [TheForge] Power hammer questions/Frosty   Bob Smolen
• [TheForge] Re: Fw: [EK-Equine] Trailering question....   Mike Spencer
• [TheForge] Re: Fw: [EK-Equine] Trailering question....   Mike Spencer
• [Fwd: Re: [TheForge] Re: Fw: [EK-Equine] Trailering question....]   Mike Spencer
• [TheForge] Re: [GoM] Jacobs Chucks   Mike Spencer
• [TheForge] Re: words   Mike Spencer
• [TheForge] Re: Air Hammers Paul   Mike Spencer
• [TheForge] Re: Air Hammers Paul   Mike Spencer
• [TheForge] Re: Hammer Anvil Materials   Mike Spencer
• [TheForge] Re: Shop Cranes vs Floor Hoists   Mike Spencer
• [TheForge] Re: B1 Beverly Shear- 14g cutting   Mike Spencer
• [TheForge] Re: B1 Beverly Shear- 14g cutting   Mike Spencer
• [TheForge] Re: mis-aligned dies   Mike Spencer
• [TheForge] Re: wooden wedges   Mike Spencer
• [TheForge] weld question   Mike Spencer
• [TheForge] Re: Anvil stands   Mike Spencer
• [TheForge] Re: Historical type Forge   Mike Spencer
• [TheForge] Re: Anvil stands   Mike Spencer
• [TheForge] Re: Hoffi style (Was Anvil stands, was, was, was.....)   Mike Spencer
• [TheForge] sorta OT- "Choppers" motocycle shop tv show   Paul Sperbeck
• [TheForge] Old Air Tool Help ?   Ralph Sproul
• [TheForge] Re: Bandsaw Blades   Ralph Sproul
• [TheForge] Poor mans platen table   Ralph Sproul
• [TheForge] Poor mans platen table   Ralph Sproul
• [TheForge] Air Hammers   Ralph Sproul
• [TheForge] Hammer Anvil Materials   Ralph Sproul
• [TheForge] Hammer Anvil Materials   Ralph Sproul
• [TheForge] Air Hammer Slides.....   Ralph Sproul
• [TheForge] Re: camfollowers   Ralph Sproul
• [TheForge] LG Repairs   Ralph Sproul
• [TheForge] Shop Cranes vs Floor Hoists   Ralph Sproul
• [TheForge] NEW - weld question   Ralph Sproul
• [TheForge] Anvil stands   Ralph Sproul
• [TheForge] insurance   Ralph Sproul
• [TheForge] Book recommendations?   Ralph Sproul
• [TheForge] How to black wroght iron finish?   StantonMitrany
• [TheForge] Arched Window Curtain Rods   Howell Steve
• [TheForge] NWBA conference   Howell Steve
• [TheForge] Big mistake   Howell Steve
• [TheForge] Small runs of castings - sources?   Cameron Stoker
• [TheForge] Hydraulic Forging Press   Cameron Stoker
• [TheForge] hydraulics   Cameron Stoker
• [TheForge] Hydraulic Forging Press   Cameron Stoker
• [TheForge] My challenge for the month   Cameron Stoker
• [TheForge] Joyous News!   Shannell Sugrue
• [TheForge] Money request from qth.net   Shannell Sugrue
• [TheForge] YAK   Shannell Sugrue
• [TheForge] Poor mans platen table   Shannell Sugrue
• [TheForge] Poor mans platen table   Shannell Sugrue
• [TheForge] Air Hammers   Shannell Sugrue
• [TheForge] Re: Hammer Anvil Materials   Shannell Sugrue
• [TheForge] Re: smoothing hammer guides   Shannell Sugrue
• [TheForge] Air Hammer Slides.....   Shannell Sugrue
• [TheForge] Arched Window Curtain Rods   Shannell Sugrue
• [TheForge] Power hammer questions/Frosty   Shannell Sugrue
• [TheForge] angle smiths   Shannell Sugrue
• [TheForge] Shop Cranes vs Floor Hoists   Shannell Sugrue
• [TheForge] My challenge for the month   Shannell Sugrue
• [TheForge] steel idntification   Shannell Sugrue
• [TheForge] internship available now   Shannell Sugrue
• [TheForge] Big mistake   Shannell Sugrue
• [TheForge] Blower fan search   Shannell Sugrue
• [TheForge] Fwd: Re: ALPLAZ-04   Shannell Sugrue
• [TheForge] Brand New Topic-Stainless Pans   Mike Sweany
• [TheForge] twisted wire websites?   Mike Sweany
• [TheForge] Fly Press stand   John Switzer
• [TheForge] Re: odd belts   Tom Troszak
• [TheForge] Re: TheForge digest, Vol 4 #230 - 11 msgs   Tom Troszak
• [TheForge] Re: UHMW hammer guides   Tom Troszak
• [TheForge] Re: smoothing hammer guides   Tom Troszak
• [TheForge] Re: camfollowers   Tom Troszak
• [TheForge] Re: reverse electrolysis   Tom Troszak
• [TheForge] Re:half-round with a hard right angle bend   Tom Troszak
• [TheForge] Re: original swage block question   Tom Troszak
• [TheForge] Refacing old anvils?   Dan Tull
• [TheForge] chinese ASOs   Dan Tull
• [TheForge] Re: Anvils   Dan Tull
• [TheForge] pitted anvil   Dan Tull
• [TheForge] pitted anvil   Dan Tull
• [TheForge] Weldors Block   Dan Tull
• [TheForge] Looking for:   Dan Tull
• [TheForge] FABA conference   Dan Tull
• [TheForge] B1 Beverly Shear- 14g cutting   Dan Tull
• [TheForge] weld question   Dan Tull
• [TheForge] weld question   Dan Tull
• [TheForge] weld question   Dan Tull
• [TheForge] weld question   Dan Tull
• [TheForge] Re: Anvil stands   Dan Tull
• [TheForge] Fw:   Robert L. Vaughan
• [TheForge] Old Anvils   Aaron R Williams
• [TheForge] Old Anvils - Revisited   Aaron R Williams
• [TheForge] PLASMA CUTTER/WELDER/BRAZER   D Courtney Wilson
• [TheForge] Whitaker's Cookbook   Woolley
• [TheForge] NEW - weld question   Woolley
• [TheForge] insurance   Woolley
• [TheForge] Tom Clark Hammer(was anvil stand)   Woolley
• [TheForge] Arched Window Curtain Rods   Chris Worsley
• [TheForge] affiliate for Richmond, VA area   Kenneth Zastrow
• [TheForge] angle smiths   bill blacksmith
• [TheForge] angle smiths   bill blacksmith
• [TheForge] A small score - railroad spikes.   dann
• [TheForge] Refacing old anvils?   gblacksmith
• [TheForge] chinese ASOs   gblacksmith
• [TheForge] Refacing old anvils?   gblacksmith
• [TheForge] Joyous News!   gblacksmith
• [TheForge] Refacing old anvils?   gblacksmith
• [TheForge] Fw: [EK-Equine] Trailering question....   gblacksmith
• [TheForge] how to pound metal   gblacksmith
• [TheForge] pitted anvil   gblacksmith
• [TheForge] words   gblacksmith
• [TheForge] words   gblacksmith
• [TheForge] Daylight Savings time ... USA   gblacksmith
• [TheForge] Delrin hammer guides?   gblacksmith
• [TheForge] Delrin hammer guides?   gblacksmith
• [TheForge] Old Anvils   gblacksmith
• [TheForge] RE: Old Anvils/ schooling   gblacksmith
• [TheForge] stainless steel rivets   gblacksmith
• [TheForge] Old Anvils - Revisited   gblacksmith
• [TheForge] Arched Window Curtain Rods   gblacksmith
• [TheForge] B1 Beverly Shear- 14g cutting   gblacksmith
• [TheForge] Coherex   gblacksmith
• [TheForge] How to black wroght iron finish?   gblacksmith
• [TheForge] oil-wax finish   gblacksmith
• [TheForge] Re: mis-aligned dies   gblacksmith
• [TheForge] Re: mis-aligned dies   gblacksmith
• [TheForge] steel idntification   gblacksmith
• [TheForge] more gas (the propane kind)   gblacksmith
• [TheForge] Swedge block question   gblacksmith
• [TheForge] twisted wire websites?   gblacksmith
• [TheForge] weld question   gblacksmith
• [TheForge] NEW - weld question   gblacksmith
• [TheForge] Re: Hoffi style (Was Anvil stands, was, was, was.....)   gblacksmith
• [TheForge] Poor mans platen table   evelyn hart
• [TheForge] Poor mans platen table   evelyn hart
• [TheForge] insurance   irontree
• [TheForge] insurance   irontree
• [TheForge] insurance   irontree
• [TheForge] how to pound metal   jon.sloan
• [TheForge] anvil construction   jon.sloan
• [TheForge] anvils   jon.sloan
• [TheForge] anvil stands   klgeorge
• [TheForge] Old Air Tool Help ?   lama
• [TheForge] Old Air Tool Help ?   lama
• [TheForge] Joyous News!   lama
• [TheForge] bandsaw blades and grinding discs/belts   lama
• [TheForge] Old Air Tool Help ?   lama
• [TheForge] Money request from qth.net   lama
• [TheForge] Small runs of castings - sources?   lama
• [TheForge] Re: Hammer Anvil Materials   lama
• [TheForge] was Air Hammer Slides.....   lama
• [TheForge] Shop Cranes vs Floor Hoists   lama
• [TheForge] Off Topic / satellite internet connection / YAK   lama
• [TheForge] My challenge for the month   lama
• [TheForge] insurance   lama
• [TheForge] Forging Titanium   terry
• [TheForge] Power hammer questions   [email protected]
• [TheForge] Joyous News!   [email protected]
• [TheForge] Joyous News!   [email protected]
• [TheForge] Auction web page is up   [email protected]
• [TheForge] Re: Fw: [EK-Equine] Trailering question....   [email protected]
• [TheForge] Fw: [EK-Equine] Trailering question....   [email protected]
• [TheForge] Re: Fw: [EK-Equine] Trailering question....   [email protected]
• [Fwd: Re: [TheForge] Re: Fw: [EK-Equine] Trailering question....]   [email protected]
• [TheForge] pitted anvil   [email protected]
• [TheForge] buying a new anvil (was: pitted anvil)   [email protected]
• [TheForge] Daylight Savings time ... USA   [email protected]
• [TheForge] For Sale Items (power hammers)   [email protected]
• [TheForge] Hammer Anvil Materials   [email protected]
• [TheForge] Re: smoothing hammer guides   [email protected]
• [TheForge] Re: smoothing hammer guides   [email protected]
• [TheForge] Weldors Block   [email protected]
• [TheForge] Brand New Topic-Stainless Pans   [email protected]
• [TheForge] Weldors Block   [email protected]
• [TheForge] Power hammer questions/Frosty   [email protected]
• [TheForge] Power hammer questions/Frosty   [email protected]
• [TheForge] Arched Window Curtain Rods   [email protected]
• [TheForge] Air Hammer Slides.....   [email protected]
• [TheForge] Arched Window Curtain Rods   [email protected]
• [TheForge] was Air Hammer Slides.....   [email protected]
• [TheForge] was Air Hammer Slides.....   [email protected]
• [TheForge] Re:beginner smith Aaron   [email protected]
• [TheForge] Re:beginner smith Aaron   [email protected]
• [TheForge] Re:Air hammer slides   [email protected]
• [TheForge] Re:Air hammer slides   [email protected]
• [TheForge] Thank you   [email protected]
• [TheForge] Power hammer questions/Frosty   [email protected]
• [TheForge] air curtain   [email protected]
• [TheForge] LG Repairs   [email protected]
• [TheForge] Coherex   [email protected]
• [TheForge] Coherex   [email protected]
• [TheForge] Cookbook   [email protected]
• [TheForge] Cookbook   [email protected]
• [TheForge] B1 Beverly Shear- 14g cutting   [email protected]
• [TheForge] A small score - railroad spikes. Dave   [email protected]
• [TheForge] Off Topic / satellite internet connection / YAK   [email protected]
• [TheForge] Off Topic / satellite internet connection / YAK   [email protected]
• [TheForge] Hydraulic Forging Press   [email protected]
• [TheForge] Lathe info needed   [email protected]
• [TheForge] from another list   [email protected]
• [TheForge] Re: Happy Easter   [email protected]
• [TheForge] gas forge design   [email protected]
• [TheForge] Forging Titanium   [email protected]
• [TheForge] Swedge block question   [email protected]
• [TheForge] Re: reverse electrolysis   [email protected]
• [TheForge] Re: reverse electrolysis   [email protected]
• [TheForge] weld question   [email protected]
• [TheForge] Pet peeves (YAK)   [email protected]
• [TheForge] Pet peeves (YAK)   [email protected]
• [TheForge] Big mistake   [email protected]
• [TheForge] Big mistake   [email protected]
• [TheForge] weld question   [email protected]
• [TheForge] my mistake   [email protected]
• [TheForge] anvil construction   [email protected]
• [TheForge] weld question   [email protected]
• [TheForge] Re: original swage block question   [email protected]
• [TheForge] Re: original swage block question   [email protected]
• [TheForge] NEW - weld question   [email protected]
• [TheForge] weld question   [email protected]
• [TheForge] Re: anvil fasteners   [email protected]
• [TheForge] Re: Anvil stands   [email protected]
• [TheForge] Re: American Choppers   [email protected]
• [TheForge] Historical type Forge   [email protected]
• [TheForge] Anvil stands plus anvil for sale...   [email protected]
• [TheForge] mis-aligned dies   theron
• [TheForge] Re: mis-aligned dies   theron
• [TheForge] Re: wooden wedges   theron
• [TheForge] Re: wooden wedges   theron
• [TheForge] B1 Beverly Shear- 14g cutting   mike wolfe
• [TheForge] insurance   mike wolfe

Last message date: Wed Apr 30 23:51:41 2003
Archived on: Thu Mar 25 23:13:10 2004

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...