December 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Dec 1 03:03:32 EST 2008
Ending: Wed Dec 31 23:50:26 EST 2008
Messages: 1898

• [Elecraft] K3 RX AGC right after a transmission   Toby Deinhardt
  • [Elecraft] K3 RX AGC right after a transmission   ab2tc
    • [Elecraft] K3 RX AGC right after a transmission   Bill W4ZV
      • [Elecraft] K3 RX AGC right after a transmission   ab2tc
      • [Elecraft] K3 RX AGC right after a transmission   Barry N1EU
      • [Elecraft] K3 RX AGC right after a transmission   Geoffrey Mackenzie-Kennedy
      • [Elecraft] K3 RX AGC right after a transmission   Bill W4ZV
      • [Elecraft] K3 RX AGC right after a transmission   Paul Christensen
• [Elecraft] K3 and CQWW   Berni G0IDA
  • [Elecraft] K3 and CQWW   Julian, G4ILO
    • [Elecraft] K3 and CQWW   Ron D'Eau Claire
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Vic K2VCO
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Jim Brown
      • [Elecraft] K3 and CQWW   David Cutter
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Julian, G4ILO
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Jim Brown
      • [Elecraft] K3 and CQWW   Julian, G4ILO
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Dave Yarnes
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   Bill W4ZV
      • [Elecraft] K3 and CQWW   David Cutter
      • [Elecraft] K3 and CQWW   Barry N1EU
    • [Elecraft] K3 and CQWW   Vic K2VCO
    • [Elecraft] K3 and CQWW   Jim Brown
      • [Elecraft] K3 and CQWW   Timothy.Urban at wc.ey.com
      • [Elecraft] K3 and CQWW   Mark KN7T
      • [Elecraft] K3 and CQWW   Björn Mohr
      • [Elecraft] K3 and CQWW   S Sacco
  • [Elecraft] K3 and CQWW   G3MLO
    • [Elecraft] K3 and CQWW   Ignacy
  • [Elecraft] K3 and CQWW   Milt, N5IA
    • [Elecraft] K3 and CQWW   Berni G0IDA
  • [Elecraft] K3 and CQWW   GM0ELP
    • [Elecraft] K3 and CQWW   Tom Wylie
      • [Elecraft] K3 and CQWW   Matt Zilmer
      • [Elecraft] K3 and CQWW   Jim Brown
  • [Elecraft] K3 and CQWW   Barry N1EU
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Toby Deinhardt
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   ab2tc
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Alan Bloom
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Joe Subich, W4TV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Joe Subich, W4TV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill Tippett
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Joe Subich, W4TV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Tom Wylie
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   ab2tc
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Toby Deinhardt
• [Elecraft] K3 AFX   Arie Kleingeld PA3A
• [Elecraft] K3 - CW Sidetone in Dual Receive   GW0ETF
• [Elecraft] K3 - CW Sidetone in Dual Receive   d.cutter at ntlworld.com
  • [Elecraft] K3 - CW Sidetone in Dual Receive   Jim Brown
    • [Elecraft] K3 - CW Sidetone in Dual Receive   Joe Subich, W4TV
• [Elecraft] ICE 419 interface   John Unger
  • [Elecraft] ICE 419 interface   Joe Subich, W4TV
    • [Elecraft] ICE 419 interface   Andy Faber
      • [Elecraft] ICE 419 interface   Joe Subich, W4TV
• [Elecraft] ICE 419 interface   d.cutter at ntlworld.com
• [Elecraft] K3 Procat Cool 5.5 Update   ni0c
• [Elecraft] External speakers?   NZ8J
• [Elecraft] ICE 419 interface   Greg - AB7R
  • [Elecraft] ICE 419 interface   Dave Hachadorian
• [Elecraft] K3 popping noise during QSK   Julius Fazekas
  • [Elecraft] K3 popping noise during QSK   Vic K2VCO
    • [Elecraft] K3 popping noise during QSK   Julius Fazekas
    • [Elecraft] K3 popping noise during QSK   Joe Planisky
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Geoffrey Mackenzie-Kennedy
• [Elecraft] N2CQ QRP Contest Calendar: December 2008   Ken Newman
• [Elecraft] Running an ICOM PW-1 Amp with the K3   Tom Hammond
  • [Elecraft] Running an ICOM PW-1 Amp with the K3   John E. Reiser
• [Elecraft] K3 and CQWW   WILLIS COOKE
• [Elecraft] K3 RX AGC right after a transmission   K8AC
• [Elecraft] K3 New owner 2B Checklist   Gary Smith
  • [Elecraft] K3 New owner 2B Checklist   Jim Brown
  • [Elecraft] K3 New owner 2B Checklist   Ron D'Eau Claire
    • [Elecraft] K3 New owner 2B Checklist   Jim Brown
• [Elecraft] K3s in CQ WW CW   Bill W4ZV
  • [Elecraft] K3s in CQ WW CW   Tony Fegan VE3QF
• [Elecraft] Power Amps and AGC   Jim Brown
  • [Elecraft] Power Amps and AGC   Jerry Flanders
    • [Elecraft] Power Amps and AGC   Paul Christensen
    • [Elecraft] Power Amps and AGC   Jim Brown
• [Elecraft] K3 changing RX filter during transmit   Jim Brown
  • [Elecraft] K3 changing RX filter during transmit   David Cutter
• [Elecraft] CQ WW DX CW   Julius Fazekas
• [Elecraft] Potentially Excellent External Speakers...   S Sacco
  • [Elecraft] Potentially Excellent External Speakers...   Bob
    • [Elecraft] Potentially Excellent External Speakers...   Joe Subich, W4TV
  • [Elecraft] Potentially Excellent External Speakers...   Adam Koczarski
  • [Elecraft] Potentially Excellent External Speakers...   Grant Youngman
• [Elecraft] CQWW   Gerd Schweidler
• [Elecraft] Birdie on 6m with the RX port selected?   Lance Collister
• [Elecraft] Re: K3 and CQWW   Dick Dievendorff
• [Elecraft] K3 RX AGC right after a transmission   Arie Kleingeld PA3A
• [Elecraft] K3 and CQWW   DOUGLAS ZWIEBEL
  • [Elecraft] K3 and CQWW   John
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Kok Chen
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Woolley (E.L)
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Woolley (E.L)
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   John A. McCabe
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Ron D'Eau Claire
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Cutter
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   John A. McCabe
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W5WVO
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Cutter
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Geoffrey Mackenzie-Kennedy
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Monty Shultes
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Don Wilhelm
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Julian, G4ILO
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Pratt
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Toby Deinhardt
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   N8LP
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Toby Deinhardt
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Larry Phipps
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Julian, G4ILO
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Julian, G4ILO
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
• [Elecraft] K3 arrived - ordered 10/14   Adam Koczarski
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   robert halloway
• [Elecraft] K3 - CQWW CW   G4MKP
• [Elecraft] K3 and CQWW @ W8JI's   Ralph K1ZZI
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Nico Palermo
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Nico Palermo
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Paul Christensen
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Toby Deinhardt
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   David Woolley (E.L)
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Nico Palermo
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Paul Christensen
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill W4ZV
      • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Philip Covington
• [Elecraft] OT: Flex 5000, ADAC Shmaydac   DOUGLAS ZWIEBEL
• [Elecraft] Re K3's use in cqww contest   Norm Greenaway
• [Elecraft] K3 plus symbol on display   Ron Kenwood
  • [Elecraft] K3 plus symbol on display   Lyle Johnson
• [Elecraft] K3 and Perseus SDR as a 2nd RX   SSB Electronic USA
  • [Elecraft] K3 and Perseus SDR as a 2nd RX   Toby Deinhardt
• [Elecraft] K3 converts during CQWW   Bob Evans
• Fw: [Elecraft] K3 and CQWW   Stephen Brandt
  • Fw: [Elecraft] K3 and CQWW   Tony Morgan
• [Elecraft] ARRL FMT and K3 Results   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] Elecraft CW Net Report for December 1st, 2008   Kevin Rock
  • [Elecraft] Elecraft CW Net Report for December 1st, 2008   Phil and Christina
    • [Elecraft] Elecraft CW Net Report for December 1st, 2008   Fred Jensen
• [Elecraft] Gp back to sleep   Bill Legge
• [Elecraft] K3 and Windows Vista ?   Lennart Michaelsson
  • [Elecraft] K3 and Windows Vista ?   Simon (HB9DRV)
  • [Elecraft] K3 and Windows Vista ?   Geoffrey Mackenzie-Kennedy
  • [Elecraft] K3 and Windows Vista ?   Dick Dievendorff
    • [Elecraft] K3 and Windows Vista - the solution!   Lennart Michaelsson
      • [Elecraft] K3 and Windows Vista - the solution!   Simon (HB9DRV)
      • [Elecraft] K3 and Windows Vista - the solution!   Steef PA2A
  • [Elecraft] K3 and Windows Vista ?   Monty Shultes
  • [Elecraft] K3 and Windows Vista ?   Julian, G4ILO
  • [Elecraft] K3 and Windows Vista ?   Dave Yarnes
• [Elecraft] K3: HC8N in CQWW   DOUGLAS ZWIEBEL
• [Elecraft] K3 Phase Noise, etc.   Bob DeHaney
• [Elecraft] [K3] AGC THR and noise   Steven.Zabarnick at notes.udayton.edu
  • [K3] [Elecraft] AGC THR and noise   Barry N1EU
    • [K3] [Elecraft] AGC THR and noise   Barry N1EU
  • [Elecraft] [K3] AGC THR and noise   Don Wilhelm
• [Elecraft] K3 arrived - ordered 10/14   Adam Koczarski
• [Elecraft] Re: Help with distorted transmit audio   Steven.Zabarnick at notes.udayton.edu
  • [Elecraft] Re: Help with distorted transmit audio   Don Wilhelm
• [Elecraft] Re:[K3] AGC THR and noise   Steven.Zabarnick at notes.udayton.edu
  • [K3] Re:[Elecraft] AGC THR and noise   Bill W4ZV
• [Elecraft] K3 New owner 2B Checklist   Gary Smith
  • [Elecraft] K3 New owner 2B Checklist   Matt Zilmer
    • [Elecraft] K3 New owner 2B Checklist   Gary Smith
• [Elecraft] RE: [NCCC] N6RO - CQWWCW- 160m; DIVERSITY with K3   Ken Keeler
• [Elecraft] K3 New owner 2B Checklist   ni0c
• [Elecraft] K2 dial alignment SOLVED!!   paul
  • [Elecraft] K2 dial alignment SOLVED!!   Don Wilhelm
    • [Elecraft] K2 dial alignment SOLVED!!   paul
• [Elecraft] 5 pole vs. 8 pole filters   aa4nc at aol.com
  • [Elecraft] 5 pole vs. 8 pole filters   Vic K2VCO
  • [Elecraft] 5 pole vs. 8 pole filters   Darwin, Keith
• [Elecraft] K3 and Perseus SDR as a 2nd RX   SSB Electronic USA
• [Elecraft] K3 and CQWW   Linas
• [Elecraft] RE: K3 & CQWW   Dave Agsten
  • [Elecraft] K3 & CQWW   Julian, G4ILO
    • [Elecraft] K3 & CQWW   Brian Alsop
      • [Elecraft] K3 & CQWW   Gary Smith
      • [Elecraft] K3 & CQWW [End of CW Speed Thread]   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] K3 & CQWW [End of CW Speed Thread]   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] RE: K3 & CQWW   Kevin
• [Elecraft] K3 New owner 2B Checklist   Gary Smith
• [Elecraft] re: K3/HPSDR/Perseus/QS1R -- it is *NOT* about limits....   Ken N9VV
• [Elecraft] KDVR3 Confirmation Notice   Roy Morris
• [Elecraft] K3 KDVR manual   Ian Maude
  • [Elecraft] K3 KDVR manual   k4tmc at aol.com
    • [Elecraft] K3 KDVR manual   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] K3 KDVR manual   Stan Rife
      • [Elecraft] K3 KDVR manual   Iain MacDonnell - K6IAM
      • [Elecraft] K3 KDVR manual   Toby Deinhardt
      • [Elecraft] K3 KDVR manual   Ian Maude
• [Elecraft] K3 SSB Checkout QSO?   Jim Miller
  • [Elecraft] Re: K3 SSB Checkout QSO?   Jim Miller
• [Elecraft] Split while using Diversity   K2MK
  • [Elecraft] Split while using Diversity   Ed K1EP
    • [Elecraft] Split while using Diversity   K2MK
      • [Elecraft] Split while using Diversity   Bill W4ZV
      • [Elecraft] Split while using Diversity   Stan Rife
      • [Elecraft] Split while using Diversity   Don Wilhelm
      • [Elecraft] Split while using Diversity   Ian White GM3SEK
• [Elecraft] K1 headphone selection?   ARDUJENSKI at aol.com
  • [Elecraft] K1 headphone selection?   Don Wilhelm
    • [Elecraft] K1 headphone selection?   Don Wilhelm
  • [Elecraft] K1 headphone selection?   Sandy
• [Elecraft] K3 - A case for wider roofing filters?   Joe Planisky
  • [Elecraft] K3 - A case for wider roofing filters?   Lance Collister
  • [Elecraft] K3 - A case for wider roofing filters?   Barry N1EU
• [Elecraft] Sub receiver on the way   Mike Scott
• [Elecraft] K3 Audio Upgrade Mod   Dr. James C. Garland
  • [Elecraft] K3 Audio Upgrade Mod   Ron D'Eau Claire
    • [Elecraft] K3 Audio Upgrade Mod   Leigh L. Klotz, Jr WA5ZNU
      • [Elecraft] K3 Audio Upgrade Mod   Ron D'Eau Claire
      • [Elecraft] K3 Audio Upgrade Mod   Dr. James C. Garland
      • [Elecraft] K3 Audio Upgrade Mod   Paul Christensen
  • [Elecraft] K3 Audio Upgrade Mod   Alexander Ponomarenko
    • [Elecraft] K3 Audio Upgrade Mod   Bill W4ZV
      • [Elecraft] K3 Audio Upgrade Mod   Bill W4ZV
      • [Elecraft] K3 Audio Upgrade Mod   Ron D'Eau Claire
      • [Elecraft] K3 Audio Upgrade Mod   Mike Harris
      • [Elecraft] K3 Audio Upgrade Mod   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] K3 Audio Upgrade Mod   Alexander Ponomarenko
    • [Elecraft] K3 Audio Upgrade Mod   Bruce McLaughlin
• [Elecraft] K3 Audio Upgrade Mod   Monty Shultes
  • [Elecraft] K3 Audio Upgrade Mod   Paul Christensen
    • [Elecraft] K3 Audio Upgrade Mod   Alexander Ponomarenko
    • [Elecraft] K3 Audio Upgrade Mod   Ron D'Eau Claire
    • [Elecraft] K3 Audio Upgrade Mod   Bill W4ZV
• [K3] [Elecraft] K3 power tripping out   G4AFU Paul
  • [K3] [Elecraft] K3 power tripping out   Jon K Hellan
    • [K3] [Elecraft] K3 power tripping out   Ron D'Eau Claire
      • [K3] [Elecraft] K3 power tripping out   Barbara Maloney
      • [K3] RE: [Elecraft] K3 power tripping out   G4AFU Paul
    • [K3] [Elecraft] K3 power tripping out   Alan Bloom
  • [K3] [Elecraft] K3 power tripping out   Craig KA0CT
    • [K3] [Elecraft] K3 power tripping out   Tony Morgan
    • [K3] [Elecraft] K3 power tripping out   Ron D'Eau Claire
  • [K3] [Elecraft] K3 power tripping out   Adam Koczarski
    • [K3] RE: [Elecraft] K3 power tripping out   G4AFU Paul
• [Elecraft] KFL3A-1.0K filter for voice???   Doc RL
• [Elecraft] K3 Audio Upgrade Mod   Roy Morris
  • [Elecraft] K3 Audio Upgrade Mod   Ian White GM3SEK
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Bill Tippett
  • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Kok Chen
    • [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Joe Subich, W4TV
• [Elecraft] NG0R - K2 Build/Alignment Issue   John Hoaglun
  • [Elecraft] NG0R - K2 Build/Alignment Issue   Don Wilhelm
    • [Elecraft] NG0R - K2 Build/Alignment Issue   John Hoaglun
      • [Elecraft] NG0R - K2 Build/Alignment Issue   Don Wilhelm
• [Elecraft] xv222   ron
• [Elecraft] K3 s/n 1693   John/K8AZT
  • [Elecraft] K3 s/n 1693   Lyle Johnson
• [Elecraft] K3 Audio Upgrade Mod   David Lankshear
• [Elecraft] K3 Audio Upgrade Mod   Roy Morris
• [Elecraft] K3 and the digital modes   Lynn Lamb, W4NL
  • [Elecraft] K3 and the digital modes   Ken K3IU
  • [Elecraft] K3 and the digital modes   Iain MacDonnell - K6IAM
  • [Elecraft] K3 and the digital modes   Lyle Johnson
    • [Elecraft] K3 and the digital modes   Leigh L. Klotz, Jr WA5ZNU
  • [Elecraft] K3 and the digital modes   Don Wilhelm
  • [Elecraft] K3 and the digital modes   Jim Brown
• [Elecraft] K2 Serial Interface   Ken/NO4D
• [Elecraft] K3 & ADAT ADT-200A by HB9CBU   Dave Agsten
• [Elecraft] K3 and IC- 2KL; negative voltage modification   OE5CSP-Chris
  • [Elecraft] K3 and IC- 2KL; negative voltage modification   David Cutter
    • [Elecraft] K3 and IC- 2KL; negative voltage modification   OE5CSP-Chris
  • [Elecraft] K3 and IC- 2KL; negative voltage modification   Ron N9RC
    • [Elecraft] K3 and IC- 2KL; negative voltage modification   OE5CSP-Chris
      • [Elecraft] K3 and IC- 2KL; negative voltage modification   chen dave
    • [Elecraft] K3 and IC- 2KL; negative voltage modification   DC1RS
      • [Elecraft] K3 and IC- 2KL; negative voltage modification   gdaught6 at stanford.edu
      • [Elecraft] K3 and IC- 2KL; negative voltage modification   Len, K3LJ
      • [Elecraft] K3 and IC- 2KL; negative voltage modification   Andreas Junge
      • [Elecraft] K3 and IC- 2KL; negative voltage modification   DC1RS
    • [Elecraft] K3 and IC- 2KL; negative voltage modification   Björn Mohr
  • [Elecraft] K3 and IC- 2KL; negative voltage modification   OE5CSP-Chris
• [Elecraft] K3 Band Data   Jan Erik Holm
  • [Elecraft] K3 Band Data   Joe Subich, W4TV
    • [Elecraft] K3 Band Data   Jan Erik Holm
• [Elecraft] K3 KRX3 Katiegramm received   dh0sp
• [Elecraft] K3 Band Data   Phil & Debbie Salas
• [Elecraft] K3/100 SN 2307 is here!   David Goodenough
• [Elecraft] Factory built 2207 in Paraguay!   zp6cw
• [Elecraft] K3 - KDVR3 shipping   Terry Schieler
  • [Elecraft] [K3] KDVR3 now shipping   Toby Deinhardt
• [Elecraft] NEW QSK -- Internal/External Keyer   W7TEA
  • [Elecraft] NEW QSK -- Internal/External Keyer   Bob Cunnings
• [Elecraft] K3 Band Data   Greg - AB7R
  • [Elecraft] K3 Band Data   Joe Subich, W4TV
• [Elecraft] RF feedback   Richard S. Lindzen
  • [Elecraft] RF feedback   Vic K2VCO
    • [Elecraft] RF feedback   Dave Hachadorian
      • [Elecraft] RF feedback   Richard S. Lindzen
• [Elecraft] RTTY with K3   Ignacy
• [Elecraft] K3 Band Data   Greg - AB7R
• [Elecraft] FS k2/100 in Europe   Andreas Tsekos
  • [Elecraft] FS k2/100 in Europe   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] FS k2/100 in Europe   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] RTTY with K3   Greg - AB7R
• [Elecraft] (no subject)   Thomas Shultz
• [Elecraft] RF feedback   AJSOENKE at aol.com
  • [Elecraft] RF feedback   Jack Regan
    • [Elecraft] RF feedback   Jim Wiley
      • [Elecraft] RF feedback   David Cutter
    • [Elecraft] RF feedback   Jim Brown
• [Elecraft] Scan Rate Adjustment   Bob Tellefsen
  • [Elecraft] Scan Rate Adjustment   drewko
• [Elecraft] Mic for K3   THOMAS BRERETON
• [Elecraft] NG0R - K2 Build/Alignment Issue   John Hoaglun
  • [Elecraft] NG0R - K2 Build/Alignment Issue   Don Wilhelm
    • [Elecraft] NG0R - K2 Build/Alignment Issue   John Hoaglun
      • [Elecraft] NG0R - K2 Build/Alignment Issue   Don Wilhelm
• [Elecraft] K2 Serial 5600 For Sale   W7is at aol.com
• [Elecraft] Stream and Vista for MFSK   Tom Price
  • [Elecraft] Stream and Vista for MFSK   Julian, G4ILO
    • SV: [Elecraft] Stream and Vista for MFSK   Lennart Michaelsson
    • [Elecraft] Stream and Vista for MFSK   Rick Kunath
  • [Elecraft] Stream and Vista for MFSK   Tom Price
• [Elecraft] K3 :: QSK with external keyer   inventor_sixty_one
• [Elecraft] Doing all additions at once   David Ferrington, M0XDF
  • [Elecraft] Doing all additions at once   Don Wilhelm
    • [Elecraft] Doing all additions at once   David Ferrington, M0XDF
    • [Elecraft] Doing all additions at once   Ron D'Eau Claire
• [Elecraft] K3 and the digital modes   Lynn Lamb, W4NL
  • [Elecraft] K3 and the digital modes   Bill W5WVO
    • [Elecraft] K3 and the digital modes   Julian, G4ILO
• [Elecraft] K3: 2.1kHz Filter For Sale in UK   paul.bradbeer2 at ntlworld.com
• [Elecraft] Fldigi 3.03 Rig Control for K3   Frank MacDonell
  • [Elecraft] Fldigi 3.03 Rig Control for K3   Julian, G4ILO
    • [Elecraft] Fldigi 3.03 Rig Control for K3   Julian, G4ILO
• [Elecraft] K3 :: QSK with external keyer   inventor_sixty_one
• [Elecraft] [K3] RF Feedback Mod   Roy Morris
  • [Elecraft] [K3] RF Feedback Mod   David Pratt
• [Elecraft] Things to watch with the KRX3   William Evans
  • [Elecraft] Things to watch with the KRX3   Ed Gray W0SD
• [Elecraft] [K3] Poor man's beverage and diversity   Vic K2VCO
  • [Elecraft] OT: [K3] Poor man's beverage and diversity   Ken Kopp
  • [Elecraft] [K3] Poor man's beverage and diversity   David Cutter
    • [Elecraft] [K3] Poor man's beverage and diversity   Vic K2VCO
      • [Elecraft] [K3] Poor man's beverage and diversity   David Cutter
      • [Elecraft] Re: Poor man's beverage, Ground Cooperative Antennas   Niel Skousen
      • [Elecraft] Units   Mike Harris
      • [Elecraft] Units   Bob
      • [Elecraft] Units   Tom
      • [Elecraft] Units   Don Wilhelm
      • [Elecraft] Units   Tom
      • [Elecraft] Units   Dave Yarnes
      • [Elecraft] Units   Dave Yarnes
      • [Elecraft] Units   David Ricketts
      • [Elecraft] Units   Mike Harris
      • [Elecraft] Units   Bill W5WVO
      • [K3] [Elecraft] Units   Julian, G4ILO
      • [K3] [Elecraft] Units   Bill W5WVO
      • [K3] [Elecraft] Units   Phil Kane
      • [K3] [Elecraft] Units   Paul Christensen
      • [Elecraft] Units   Ron D'Eau Claire
      • [Elecraft] Units   Bill W5WVO
      • [Elecraft] Units   Jon K Hellan
      • [Elecraft] Units   Barry Garratt
      • [Elecraft] Units   Phil Kane
      • [Elecraft] Units   David Cutter
      • [Elecraft] Units   Jim Wiley
      • [Elecraft] Units   Ralph Tyrrell
      • [Elecraft] Units   gdaught6 at stanford.edu
      • [Elecraft] Units   Phil Kane
      • [Elecraft] Units   Tom Wylie
      • [Elecraft] Units   Rick Dettinger
      • [Elecraft] Units   Toby Deinhardt
      • [Elecraft] Units   Jim Wiley
      • [Elecraft] Units [END of THREAD]   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] Units   Fred Jensen
      • [Elecraft] Units   paul at n4lcd.com
• [Elecraft] K3: KRX3 hearing no Signals   Ed Gray W0SD
  • [Elecraft] K3: KRX3 hearing no Signals   Ron D'Eau Claire
    • [Elecraft] K3: KRX3 hearing no Signals   Dick Dievendorff
      • [Elecraft] KRX3: Poor Sensitivity on Aux Antenna Port   Scott Prather
• [Elecraft] K3: New/ Old QSK   Barry Simpson
  • [Elecraft] K3: New/ Old QSK   Vic K2VCO
    • [Elecraft] K3: New/ Old QSK   Paul Christensen
      • [Elecraft] K3: New/ Old QSK   Paul Christensen
      • [Elecraft] K3: New/ Old QSK   Barry Simpson
      • [Elecraft] K3: New/ Old QSK   W7TEA
      • [Elecraft] K3: New/ Old QSK   Paul Christensen
  • [Elecraft] K3: New/ Old QSK   Dick Dievendorff
• [Elecraft] Reminder - UK Elecraft net Sundays 1000 local, 3630 KHz   Dave G4AON
• [Elecraft] K3 Hands On   Elliott Lawrence
  • [Elecraft] K3 Hands On   Elliott Lawrence
• [Elecraft] Vista Driver for Prolific USB to Serial   Frank MacDonell
  • [Elecraft] Vista Driver for Prolific USB to Serial   Ron D'Eau Claire
  • [Elecraft] Vista Driver for Prolific USB to Serial   Dick Dievendorff
  • [Elecraft] Vista Driver for Prolific USB to Serial   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] No TX audio   Howard Klein
• [Elecraft] WTB: K2/100   NZ8J
• [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Doug Phillips
  • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Leigh L. Klotz, Jr WA5ZNU
    • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Paul Christensen
      • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   David Cutter
      • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Paul Christensen
  • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Dick Dievendorff
  • [Elecraft] HPS-1a Gamma Hybrid,Communications Power Supply   Jim Miller
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] OT: 160/80 M Rx loops   Ken Kopp
• [Elecraft] Elecraft Covers   Tony Morgan
• [Elecraft] Not a K3, for sure - Early dual diversity receiver   Ken Kopp
• [Elecraft] K3 Procat Cool 5.5 Update Rev 75   Don Rasmussen
• [Elecraft] FS K2/100 in European Union   Andreas Tsekos
• [Elecraft] UK Elecraft net report for Sunday 7th December   Dave G4AON
• [Elecraft] Memory Chaining Anomoly   k4pi
• [Elecraft] Memory Chaining: Disregard   k4pi
• [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Howard K2HK
  • [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Dick Dievendorff
    • [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Howard K2HK
  • [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Barry N1EU
    • [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Howard..K2HK
    • [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?   Howard..K2HK
• [Elecraft] [K3] KEY OUT   Monty Shultes
  • [Elecraft] [K3] KEY OUT   WILLIS COOKE
• [Elecraft] RX EQ comments   K2MK
  • [Elecraft] RX EQ comments   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] Dec. 13th PBMME   Ron Polityka
• [Elecraft] K3 Doing all additions at once   Terry Schieler
  • [Elecraft] K3 Doing all additions at once   Ed Gray W0SD
• [Elecraft] Musings on Noise Reduction   John Graf
• [Elecraft] K3-For Sale   William G. McDowell
• [Elecraft] KDVR3   Mike Harris
  • [Elecraft] KDVR3   lyle johnson
    • [Elecraft] KDVR3   Mike Harris
      • [Elecraft] KDVR3   lyle johnson
      • [Elecraft] KDVR3   Toby Deinhardt
      • [Elecraft] KDVR3   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] KDVR3   Brett Howard
      • [Elecraft] KDVR3   Don Wilhelm
• [Elecraft] transverter power out   Douglas Johnson
• [Elecraft] Musings on Noise Reduction   Lee Trout
  • [Elecraft] Musings on Noise Reduction   Roger Marrotte
    • [Elecraft] Musings on Noise Reduction   Bill W5WVO
      • [Elecraft] Musings on Noise Reduction   Richard S. Lindzen
      • [Elecraft] Musings on Noise Reduction   WA6L
      • [Elecraft] Musings on Noise Reduction   W7TEA
      • [Elecraft] Musings on Noise Reduction   Roger Marrotte
• [Elecraft] FS - KPA 100 Kit   Gary Bartlett VE1RGB
• [Elecraft] NAQCC Sprint Tuesday night!   NAQCC
• [Elecraft] Six-meter Antenna Tuner   W6SX Hank Garretson
  • [Elecraft] Six-meter Antenna Tuner   Geoffrey Mackenzie-Kennedy
    • [Elecraft] Six-meter Antenna Tuner   W6SX Hank Garretson
• [Elecraft] Lost SSb after KRX3 install.. The end   Howard K2HK
• [Elecraft] Elecraft CW Net Report for December 8th, 2008   Kevin Rock
• [Elecraft] Musings on Noise Reduction   Lee Trout
  • [Elecraft] Musings on Noise Reduction   WA6L
    • [Elecraft] Musings on Noise Reduction   K8RDD
• [Elecraft] K3 vs. IC-7200   Gert, OE3ZK
  • [Elecraft] K3 vs. IC-7200   Julian, G4ILO
  • [Elecraft] K3 vs. IC-7200   David Wilburn
    • [Elecraft] K3 vs. IC-7200   Julian, G4ILO
• [Elecraft] HPS-1a Gamma Power Supply   Benny Aumala
• [Elecraft] Line Out Clicks   jkelly
  • [Elecraft] Line Out Clicks   Don Wilhelm
    • [Elecraft] Line Out Clicks   jkelly
      • [Elecraft] Line Out Clicks   Don Wilhelm
• [Elecraft] K3 Serial Communication   Julian, G4ILO
  • [Elecraft] K3 Serial Communication   David Fleming
    • [Elecraft] K3 Serial Communication   Julian, G4ILO
• [Elecraft] Re:RX EQ comments   k4pi
  • [Elecraft] Re:RX EQ comments   Alexandr Kobranov
  • [Elecraft] Re:RX EQ comments   lyle johnson
• [Elecraft] Re:RX EQ comments   d.cutter at ntlworld.com
• [Elecraft] Six-meter Antenna Tuner   Greg - AB7R
• [Elecraft] KXV3 Available   G4MKP
• [Elecraft] K3 compression settings   David F. Reed
  • [Elecraft] K3 compression settings   Bill W5WVO
    • [Elecraft] K3 compression settings   Lyle Johnson
    • [Elecraft] K3 compression settings   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] RE: KXV3 Available   G4MKP
  • [Elecraft] RE: KXV3 Available   Terry Schieler
• [Elecraft] Musings on Noise Reduction   k4pi
• [Elecraft] Question on Squelch   Lynn Lamb, W4NL
  • [Elecraft] Question on Squelch   Ken K3IU
  • [Elecraft] Question on Squelch   Monty Shultes
• [K3] [Elecraft] It have to work better!   Alexander Ponomarenko
• [Elecraft] K3: Supply of K3AFMDKT in Europe   David Lankshear
  • [Elecraft] K3: Supply of K3AFMDKT in Europe   David Ferrington, M0XDF
• [Elecraft] K3 compression settings   David F. Reed
  • [Elecraft] K3 compression settings   Joe Planisky
• [Elecraft] KDVR3 Received   Roy Morris
  • [Elecraft] KDVR3 Received   Toby Deinhardt
    • [Elecraft] KDVR3 Received   Roy Morris
  • [Elecraft] KDVR3 Received   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3: Supply of K3AFMDKT in Europe   Dave G4AON
  • [Elecraft] K3: Supply of K3AFMDKT in Europe   Geoffrey Mackenzie-Kennedy
• [Elecraft] K3 & KRX3 Fantastic in ARRL 160 M!   Ed Gray W0SD
  • [Elecraft] K3 & KRX3 Fantastic in ARRL 160 M!   Gill W4RYW
  • [Elecraft] K3 & KRX3 Fantastic in ARRL 160 M!   Mike Harris
• [Elecraft] K3: Supply of K3AFMDKT in Europe   David Lankshear
  • [Elecraft] K3: Supply of K3AFMDKT in Europe   David Ferrington, M0XDF
• [Elecraft] K3: Supply of K3AFMDKT in Europe   David Lankshear
• [Fwd: Re: [Elecraft] K3 and the digital modes]   K8TB
  • [Elecraft] [Fwd: Re: K3 and the digital modes]   Julian, G4ILO
• [Elecraft] K3/100 with AT and... to sell   Dave
• [Elecraft] Variable filters for K3   Paul Kelly
• [Elecraft] K3 Noisy fans?   Missouri Guy
  • [Elecraft] K3 Noisy fans?   W7TMT
    • [Elecraft] K3 Noisy fans?   Trond Stubberud
  • [Elecraft] K3 Noisy fans?   Ed Muns
  • [Elecraft] K3 Noisy fans?   GW0ETF
    • [Elecraft] K3 Noisy fans?   David Ferrington, M0XDF
  • [Elecraft] K3 Noisy fans?   Joe Planisky
    • [Elecraft] K3 Noisy fans?   David Ferrington, M0XDF
      • [Elecraft] K3 Noisy fans?   Joe Planisky
      • [Elecraft] K3 Noisy fans?   Monty Shultes
      • [Elecraft] K3 Noisy fans?   ON4WIX
      • [Elecraft] K3 Noisy fans?   Ron D'Eau Claire
      • [Elecraft] K3 Noisy fans?   Joe Planisky
      • [Elecraft] K3 Noisy fans?   Stephen Prior
      • [Elecraft] K3 Noisy fans?   Adam Koczarski
      • [Elecraft] K3 Noisy fans?   David Wilburn
      • [Elecraft] K3 Noisy fans?   Iain MacDonnell - N6ML
      • [Elecraft] K3 Noisy fans?   K9ZTV
      • [Elecraft] K3 Noisy fans?   Adam Koczarski
      • [Elecraft] K3 Noisy fans?   Milt, N5IA
      • [Elecraft] K3 Noisy fans?   Iain MacDonnell - N6ML
      • [Elecraft] K3 Noisy fans?   Bill Johnson
  • [Elecraft] K3 Noisy fans?   Rob May
    • [Elecraft] K3 Noisy fans?   Ken Kopp
    • [Elecraft] K3 Noisy fans?   Jim
    • [Elecraft] K3 Noisy fans?   Gary Smith
  • [Elecraft] K3 Noisy fans?   W7TEA
    • [Elecraft] K3 Noisy fans?   Stephen Prior
• [Elecraft] K3 and MixW   Gary Gregory
  • [Elecraft] K3 and MixW   Julian, G4ILO
• [Elecraft] No Speaker output   Carsten Steinhöfel
  • [Elecraft] No Speaker output   S Sacco
    • [Elecraft] No Speaker output   Ignacy
• [Elecraft] RE: KXV3 Available - And the winner is........   G4MKP
• [Elecraft] KDVR3   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Article on Elecraft kits   ni0c
  • [Elecraft] Article on Elecraft kits   Tom Hammond
• [Elecraft] PR6   Mike Harris
  • [Elecraft] PR6   Lance Collister
  • [Elecraft] PR6   Ken Kopp
• [Elecraft] Dodgy site   David Ferrington, M0XDF
  • [Elecraft] Dodgy site   Julian, G4ILO
• [Elecraft] KRX3 Installation ; ERR VCO 00227   George Sereikas
  • [Elecraft] KRX3 Installation ; ERR VCO 00227   Barry N1EU
    • [Elecraft] KRX3 Installation ; ERR VCO 00227   Toby Deinhardt
      • [Elecraft] KRX3 Installation ; ERR VCO 00227   gdaught6 at stanford.edu
• [Elecraft] FLx GN at Maximum   Barry Pfeil
  • [Elecraft] FLx GN at Maximum   Lyle Johnson
• [Elecraft] K3 Noisy fans?   Mike Scott
  • [Elecraft] K3 Noisy fans?   Jack Regan
  • [Elecraft] K3 Noisy fans?   Toby Deinhardt
• [Elecraft] K3 Noisy fans?   Richard Ferch
  • [Elecraft] K3 Noisy fans?   Joe Planisky
• [Elecraft] K3 Noisy fans?   Missouri Guy
  • [Elecraft] K3 Noisy fans?   Ron D'Eau Claire
• [Elecraft]Re:M0DXF, Dodgy Site   David Lankshear
• [Elecraft] K3 Large tuning knob for VFO B   John Buck
• K3 PA Temp Max (was Re: [Elecraft] K3 Noisy fans?)   Jeff Wandling W7BRS via K3List
  • K3 PA Temp Max (was Re: [Elecraft] K3 Noisy fans?)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Diversity Rx and antennas   Jeff Wandling W7BRS via K3List
• [Elecraft] RE: K3 Article on Elecraft Kits   Terry Schieler
• [Elecraft] Variable filters for K3   Mike Scott
• [Elecraft] Filter problem, Invoice 53756   W5UN
• [Elecraft] {Elecraft] Re: Dodgy Site   David Lankshear
  • [Elecraft] {Elecraft] Re: Dodgy Site   Julian, G4ILO
• [Elecraft] Noisey Fan   WN3R, Dick
• [Elecraft] KRX3 Installation ; ERR VCO 00227   ww2r at g4fre.com
• [Elecraft] For Sale: K3/100 antenna tuner and...   Dave
• [Elecraft] - Mode Components - good site, good company   David Ferrington, M0XDF
• [Elecraft] K3 Audio Problem   BOB PHILBROOK
• [Elecraft] Got a Katiegram   Gary Smith
• [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.   wayne burdick
  • [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.   Ian Maude
    • [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.   David Ferrington, M0XDF
      • [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.   Ian Maude
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   wayne burdick
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Don Nesbitt
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Igor Sokolov
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Iain MacDonnell - N6ML
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Jim Brown
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   srife at swbell.net
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Don Wilhelm
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Ed Muns
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Iain MacDonnell - N6ML
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support,etc.   Phil LaMarche
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Lyle Johnson
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Stewart Baker
      • [Elecraft] K3: 2nd Rx on another band   Ken Kopp
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Ed Muns
      • [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Toby Deinhardt
• [Elecraft] K3 and MixW PSK31   Gary Gregory
  • [Elecraft] K3 and MixW PSK31   W2XB
  • [Elecraft] K3 and MixW PSK31   Craig KA0CT
  • [Elecraft] K3 and MixW PSK31   Craig KA0CT
• [Elecraft] K3: Noisy Fans   Barry Simpson
  • [Elecraft] K3: Noisy Fans   David Ferrington, M0XDF
  • [Elecraft] K3: Noisy Fans   Tim Heasman
• [Elecraft] K3 TX Audio from LINE OUT V2.72/V1.98   Stewart Baker
• [Elecraft] Santa is coming!   Benson
• [Elecraft] Re: Dodgy Site [End of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Help -- stuck in MCU LD   Grant Youngman
  • [Elecraft] Help -- stuck in MCU LD   Dick Dievendorff
  • [Elecraft] Re: Help -- stuck in MCU LD -- SOLVED   Grant Youngman
• [Elecraft] Help -- stuck in MCU LD   Grant Youngman
  • [Elecraft] Help -- stuck in MCU LD   David Ferrington, M0XDF
• [Elecraft] For Sale: W1 Wattmeter in Acrylic Case   walter renner
  • [Elecraft] Sub and Main receiver audio   Arie Kleingeld PA3A
• [Elecraft] Help -- stuck in MCU LD   Grant Youngman
  • [Elecraft] Help -- stuck in MCU LD   David Ferrington, M0XDF
• [Elecraft] ksb2 question   Marinos Markomanolakis, M.D.
• [Elecraft] RX audio in both ears for sub receiver   W8ZN at comcast.net
  • [Elecraft] KDVR3 delivery   Peter Connors, F5VNB
• [Elecraft] Re: K3 Beta firmware rev. 2.72: updated DVR support, etc.   Peter
• [K3] [Elecraft] K3: 1. Loud audio blast on power up 2. Main/SUB balance   Enno, PF5X
  • [K3] [Elecraft] K3: 1. Loud audio blast on power up 2. Main/SUB balance   Ed K1EP
  • [K3] [Elecraft] K3: 1. Loud audio blast on power up   Monty Shultes
• [Elecraft] DVR from software   W8ZN at comcast.net
• [Elecraft] Re: Help -- stuck in MCU LD -- SOLVED   Grant Youngman
• [WT-support] [Fwd: [Elecraft] DVR from software]   Toby Deinhardt
• [Elecraft] Some Info Please   Bryan. Mw0ctx
  • [Elecraft] Some Info Please   Ron D'Eau Claire
  • [Elecraft] Some Info Please   Sam M
• [Elecraft] OT: 'tis the season   DOUGLAS ZWIEBEL
• [Elecraft] KDVR3 Installed and Running   Roy Morris
• [Elecraft] RigBlaster Plug & Play   Henri A Pollard
  • [Elecraft] Earning Customer Loyalty   Ken Widelitz
    • [Elecraft] Earning Customer Loyalty   David Ricketts
    • [Elecraft] Earning Customer Loyalty   Tom Wylie
      • [Elecraft] Earning Customer Loyalty   Trond Stubberud
      • [Elecraft] Earning Customer Loyalty   David Ferrington, M0XDF
      • [Elecraft] Earning Customer Loyalty   Jerry Flanders
      • [Elecraft] Earning Customer Loyalty   Tom Wylie
      • [Elecraft] Earning Customer Loyalty   Dave-K7DAA
      • [Elecraft] Earning Customer Loyalty   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] Earning Customer Loyalty   Tom Wylie
      • [Elecraft] KRX3 built into a K3 - video   Arie Kleingeld PA3A
      • [Elecraft] Earning Customer Loyalty   Fred Jensen
• [Elecraft] K102 AUX I/O Module toroid question   Sam M
  • [Elecraft] K102 AUX I/O Module toroid question   Don Wilhelm
    • [Elecraft] K102 AUX I/O Module toroid question   KB9BVN
      • [Elecraft] K102 AUX I/O Module toroid question   Don Wilhelm
      • [Elecraft] K102 AUX I/O Module toroid question   Sam M
• [Elecraft] K2 -- loss of output power control   Brian Lloyd
  • [Elecraft] K2 -- loss of output power control   Don Wilhelm
    • [Elecraft] K2 -- loss of output power control   Brian Lloyd
      • [Elecraft] K2 -- loss of output power control   Don Wilhelm
      • [Elecraft] K2 -- loss of output power control   Brian Lloyd
      • [Elecraft] K2 -- loss of output power control   Don Wilhelm
• [Elecraft] fan speed   Todd Ruby
  • [Elecraft] fan speed   Joe Planisky
• [Elecraft] K3 Monitor   Ed Gray W0SD
  • [Elecraft] K3 Monitor   Barry Simpson
  • [Elecraft] K3 Monitor   Jan Erik Holm
  • [Elecraft] K3 Monitor   Lyle Johnson
    • [Elecraft] K3 Monitor   Ed Gray W0SD
      • [Elecraft] K3 Monitor   Lyle Johnson
  • [Elecraft] K3 Monitor   Ignacy
• [Elecraft] K3 and MixW PSK31   Gary Gregory
  • [Elecraft] K3 and MixW PSK31   John Buck
• [Elecraft] K3: Poor AM receive audio quality   shanewh
  • [Elecraft] K3: Poor AM receive audio quality   AD6XY
    • [Elecraft] K3: Poor AM receive audio quality   VK5ABQ
      • [Elecraft] K3: Poor AM receive audio quality   Ken Kopp
• [Elecraft] failed encoders   DOUGLAS ZWIEBEL
  • [Elecraft] failed encoders   David Pratt
• [Elecraft] failed encoders, addendum   DOUGLAS ZWIEBEL
• [Elecraft] Earning Customer Loyalty   David Ferrington, M0XDF
• [Elecraft] K3 Monitor   W8ZN at comcast.net
  • [Elecraft] K3 Monitor   Don Wilhelm
    • [Elecraft] Muting mic when voice keying (was K3 Monitor)   Barry N1EU
      • [Elecraft] Muting mic when voice keying (was K3 Monitor)   Lyle Johnson
      • [Elecraft] Muting mic when voice keying (was K3 Monitor)   Ed Gray W0SD
      • [Elecraft] Muting mic when voice keying (was K3 Monitor)   Monty Shultes
      • [Elecraft] Muting mic when voice keying (was K3 Monitor)   Joe Subich, W4TV
    • [Elecraft] KDVR3 Firmware request   Ed Gray W0SD
  • [Elecraft] K3 Monitor   Lyle Johnson
• [Elecraft] Who is using CW to PSK31 with K3?   aa4nc at aol.com
  • [Elecraft] Who is using CW to PSK31 with K3?   Vic K2VCO
    • [Elecraft] Who is using CW to PSK31 with K3?   Julian, G4ILO
      • [Elecraft] Who is using CW to PSK31 with K3?   Vic K2VCO
    • [Elecraft] Who is using CW to PSK31 with K3?   Bob Cunnings
    • [Elecraft] Who is using CW to PSK31 with K3?   Bill Johnson
• [Elecraft] K3: Noisey Fans   Terry Schieler
• [Elecraft] K3   John E. Reiser
• [Elecraft] K3 power settings   Ian Maude
• [Elecraft] Tis the Season! Ho Ho Ho   Roger Stein
• [Elecraft] K2 inexpensive carrying case   Terry Wilkinson
• [Elecraft] K3: Poor AM receive audio quality   Dave G4AON
• [Elecraft] KDVR3 Firmware request   Ed Gray W0SD
  • [Elecraft] KDVR3 Firmware request   Lyle Johnson
    • [Elecraft] KDVR3 Firmware request   Ed Gray W0SD
      • [Elecraft] KDVR3 Firmware request   Iain MacDonnell - N6ML
      • [Elecraft] KDVR3 Firmware request   Ed Gray W0SD
      • [Elecraft] KDVR3 Firmware request   Iain MacDonnell - N6ML
      • [Elecraft] KDVR3 Firmware request   Ed Gray W0SD
      • [Elecraft] KDVR3 Firmware request   Iain MacDonnell - N6ML
      • [Elecraft] KDVR3 Firmware request   Alexandr Kobranov
• [Elecraft] K3 wattmeter   Todd Ruby
  • [Elecraft] K3 wattmeter   David Fleming
• [Elecraft] test   Thomas M. Beaudry
  • [Elecraft] test   Thomas M. Beaudry
• [Elecraft] For sale: K2 #3422   Thomas M. Beaudry
  • [Elecraft] For sale: K2 #3422   Thomas M. Beaudry
• FW: [Elecraft] K3   John E. Reiser
• [Elecraft] K3 mojo never ends   Alexandr Kobranov
• [Elecraft] K3 Beta firmware rev. 2.73: Miscellaneous improvements   wayne burdick
• [Elecraft] Filters   Michael M. Raskin
  • [Elecraft] Filters   Ken Kopp
• [Elecraft] K3: Passband tuning questions   VK5ABQ
  • [Elecraft] K3: Passband tuning questions   VK5ABQ
    • [Elecraft] K3: Passband tuning questions   Don Wilhelm
    • [Elecraft] K3: Passband tuning questions   Joe Planisky
      • [Elecraft] K3: Passband tuning questions   VK5ABQ
• [Elecraft] Firmware upload to K3 using Microham MK2   John Gaynard
  • [Elecraft] Firmware upload to K3 using Microham MK2   Dick Dievendorff
• [Elecraft] OT: A suprising local hand-tool source   Ken Kopp
• [Elecraft] Re: [fpqrp] For sale: K2 #3422   Thomas M. Beaudry
• [Elecraft] Transport Case for K3?   Jeff Maass
  • [Elecraft] Transport Case for K3?   David Cutter
  • [Elecraft] Transport Case for K3 - for UK?   GW0ETF
    • [Elecraft] Transport Case for K3 - for UK?   David Ricketts
    • [Elecraft] Transport Case for K3 - for UK?   David Ferrington, M0XDF
  • [Elecraft] Transport Case for K3?   David Ferrington, M0XDF
  • [Elecraft] Transport Case for K3?   Cady, Fred
    • [Elecraft] Transport Case for K3?   Terry Price
      • [Elecraft] Transport Case for K3?   Paul Christensen
• [Elecraft] easy source of static dissipating work mat?   Gary Smith
  • [Elecraft] easy source of static dissipating work mat?   Dick Dievendorff
    • [Elecraft] easy source of static dissipating work mat?   Alan Bloom
      • [Elecraft] easy source of static dissipating work mat?   Dr. James C. Garland
      • [Elecraft] easy source of static dissipating work mat?   Jon Kåre Hellan
      • [Elecraft] easy source of static dissipating work mat?   Alan Bloom
      • [Elecraft] easy source of static dissipating work mat?   Alan Bloom
  • [Elecraft] easy source of static dissipating work mat?   Don Nelson
    • [Elecraft] easy source of static dissipating work mat?   Jerry Flanders
      • [Elecraft] easy source of static dissipating work mat?   Matt Palmer
      • [Elecraft] easy source of static dissipating work mat?   David Woolley (E.L)
      • [Elecraft] easy source of static dissipating work mat?   David Woolley (E.L)
      • [Elecraft] easy source of static dissipating work mat?   Don Ehrlich
      • [Elecraft] easy source of static dissipating work mat?   Gary Smith
      • [Elecraft] easy source of static dissipating work mat?   Ron D'Eau Claire
      • [Elecraft] easy source of static dissipating work mat?   Ron D'Eau Claire
      • [Elecraft] easy source of static dissipating work mat?   Vic K2VCO
      • [Elecraft] easy source of static dissipating work mat?   Bill Johnson
      • [Elecraft] easy source of static dissipating work mat?   Ron D'Eau Claire
      • [Elecraft] easy source of static dissipating work mat?   Geoffrey Mackenzie-Kennedy
  • [Elecraft] easy source of static dissipating work mat?   michael taylor
• [Elecraft] Re: Travelling case for K3   Ralph Parker
  • [Elecraft] TRAVELING WITH THE K3   K9ZTV
• [Elecraft] K2 HELP ! error in CAL FCTR   Allan Glasdam
• [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Stewart Baker
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Ken K3IU
    • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Ken K3IU
      • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Ken K3IU
      • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Iain MacDonnell - N6ML
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Len, K3LJ
    • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Don Wilhelm
      • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Paul Christensen
      • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Len, K3LJ
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Enno, PF5X
• [Elecraft] FOR SALE W1   walter renner
• [K3] [Elecraft] KXR3 3db Splitter   Bill W4ZV
  • [K3] [Elecraft] KXR3 3db Splitter   Eric Swartz - WA6HHQ, Elecraft
    • [K3] [Elecraft] KXR3 3db Splitter   Tom
• [Elecraft] easy source of static dissipating work mat?   Gary Smith
• [Elecraft] K2 PLL   Allan Glasdam
• [Elecraft] Diversity Reception on K3   Michael M. Raskin
  • [Elecraft] Diversity Reception on K3   Bill W4ZV
  • [Elecraft] Diversity Reception on K3   Tom
• [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Jeff Wandling W7BRS
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Lyle Johnson
• [Elecraft] K3 NuB   tom
• [Elecraft] K3 RF Feedback Recommendation   Phil & Debbie Salas
  • [Elecraft] K3 RF Feedback Recommendation   Lyle Johnson
  • [Elecraft] K3 RF Feedback Recommendation   Don Wilhelm
  • [Elecraft] K3 RF Feedback Recommendation   Dave Hachadorian
• [Elecraft] RE: easy source of static dissipating work mat?   Barry Pfeil
• [Elecraft] K3 DVR not recording   John Buck
• [Elecraft] That's just wrong!   Colin Whitmore
  • [Elecraft] That's just wrong!   Darwin, Keith
  • [Elecraft] That's just wrong!   ON4WIX
  • [Elecraft] That's just wrong!   Lee Buller
  • [Elecraft] That's just wrong!   Bob
    • [Elecraft] That's just wrong!   Peter N Spotts
  • [Elecraft] That's just wrong!   Adam Koczarski
• [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Mike Scott
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Stewart Baker
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   ON4WIX
  • [Elecraft] K3 - 2.73/1.98 Clicks on Power On   Tom
• [Elecraft] Diversity Reception on K3   Gary Hembree
• [Elecraft] KDVR3 not recording   John Buck
  • [Elecraft] KDVR3 not recording   Iain MacDonnell - N6ML
• [Elecraft] K-3 Filters for DXing and contesting with Diversity Reception   Michael M. Raskin
  • [Elecraft] K-3 Filters for DXing and contesting with Diversity Reception   Barry N1EU
• [Elecraft] 6M preamplifier   David F. Reed
• [K3] [Elecraft] KXR3 3db Splitter   Bill W4ZV
• [Elecraft] K3 Noise Transient measurements   Mike Scott
  • [Elecraft] K3 Noise Transient measurements   Don Wilhelm
    • [Elecraft] K3 Noise Transient measurements   Tom
• [Elecraft] Re: K3, Orion, Orion II comparison   Kenneth Waites
  • [Elecraft] K3, Orion, Orion II comparison   Barry N1EU
• [Elecraft] OT: 10m contest   Jeff Wandling W7BRS
  • [Elecraft] OT: 10m contest   Tim
• [Elecraft] Dumb question .....   Michael D. Heit
  • [Elecraft] Dumb question .....   Iain MacDonnell - N6ML
  • [Elecraft] Dumb question .....   Don Wilhelm
• [Elecraft] easy source of static dissipating work mat?   Missouri Guy
  • [Elecraft] easy source of static dissipating work mat?   Bill W4ZV
    • [Elecraft] easy source of static dissipating work mat?   NZ0T
  • [Elecraft] easy source of static dissipating work mat?   W7RY
  • [Elecraft] easy source of static dissipating work mat?   Ron D'Eau Claire
    • [Elecraft] easy source of static dissipating work mat?   Don Wilhelm
• [Elecraft] Set-up screenshots...   Paul Ormandy
• [Elecraft] TRAVELING WITH THE K3   Jeff Maass
• [Elecraft] [K3} fatiguing auido, high noise environment   Mike Scott
  • [Elecraft] [K3} fatiguing auido, high noise environment   W6SX Hank Garretson
  • [Elecraft] [K3} fatiguing auido, high noise environment   Tom
    • [Elecraft] [K3} fatiguing auido, high noise environment   Ken Kopp
  • [Elecraft] [K3} fatiguing auido, high noise environment   GM0ELP
    • [Elecraft] [K3} fatiguing auido, high noise environment   Erik N Basilier
      • [Elecraft] [K3} fatiguing auido, high noise environment   Alexandr Kobranov
      • [Elecraft] [K3} fatiguing auido, high noise environment   Leigh L. Klotz, Jr WA5ZNU
    • [Elecraft] [K3} fatiguing auido, high noise environment   Bill Johnson
• [Elecraft] [K3] f/w 2.73/1.98 power calibration   Steve Ward
• [Elecraft] OT : re-10m contest   f9oj.7
• [Elecraft] OT: 10m contest   Timothy.Urban at wc.ey.com
• [Elecraft] FS: K2 loaded with accessories   Dave White
• [Elecraft] k3 MCU flashing TX lockup   Gary Gregory
  • [Elecraft] k3 MCU flashing TX lockup   Don Wilhelm
    • [Elecraft] k3 MCU flashing TX lockup   Gary Gregory
      • [Elecraft] k3 MCU flashing TX lockup   Gary Gregory
      • [Elecraft] k3 MCU flashing TX lockup   Don Wilhelm
      • [Elecraft] k3 MCU flashing TX lockup   Gary Gregory
• [Elecraft] K3: Lost in Sub-RX Operation   WA6L
  • [Elecraft] K3: Lost in Sub-RX Operation   WA6L
• [K3] [Elecraft] Audio at startup   Joe G
  • [K3] [Elecraft] Audio at startup   Joe G
• [Elecraft] KX1 Wanted to Buy   Daniel Paul Perez
• [Elecraft] [K3] Photo of Large Tuning Knob for VFO B   Gary Hvizdak
  • [Elecraft] K3 AND QUADRA   K9ZTV
    • [Elecraft] K3 AND QUADRA   Timothy Raymer
      • [Elecraft] K3 AND QUADRA   Timothy Raymer
    • [Elecraft] K3 AND QUADRA   Jerry Flanders
      • [Elecraft] K3 AND QUADRA   Joe Subich, W4TV
  • [Elecraft] Re: [K3] Photo of Large Tuning Knob for VFO B   Thom LaCosta
• [Elecraft] Dec 19 delivery   Gary Smith
• [Elecraft] Reminder - UK Elecraft net Sundays 1000 local, 3630 KHz   Dave G4AON
• [Elecraft] RadioShack Anti Static Service Kit - On Sale-   Richard Thorne
• [Elecraft] easy source of static dissipating work mat? [End of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] UK Elecraft net report for Sunday 14th December   Dave G4AON
• [Elecraft] Peculiarities of RF gain   Ignacy
  • [Elecraft] no station...   BA7NQ Terry
• [Elecraft] K3 no station...   Dave G4AON
• [Elecraft] K3 adjusting FLx gains   ni0c
• [Elecraft] K3: KDVR Status   David and Dianne on Comcast
  • [Elecraft] K3: KDVR Status   BigAlT
  • [Elecraft] K3: KDVR Status   Phillip Buckholdt
• [Elecraft] Previous Firmware   Joe G
• [Elecraft] DVR & monitor function   Bill NY9H
• [K3] [Elecraft] Audio at startup   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] f/w 2.73/1.98 power calibration   Richard Ferch
  • [Elecraft] [K3] f/w 2.73/1.98 power calibration   Bob Cunnings
    • [Elecraft] [K3] f/w 2.73/1.98 power calibration   Gregory Fischer
  • [K3] [Elecraft] f/w 2.73/1.98 power calibration   Julian, G4ILO
• [Elecraft] WTB: KX1   homolya at earthlink.net
• [Elecraft] LINE OUT output to low?   André Santos
• [Elecraft] Not Elecraft - PA3AKE Project update - DDS   Giancarlo Moda
  • [Elecraft] Not Elecraft - PA3AKE Project update - DDS   Geoffrey Mackenzie-Kennedy
• [Elecraft] Power runaway on 10m   Ignacy
• [Elecraft] K3 No speaker audio   T Gahagan
  • [Elecraft] K3 No speaker audio   Ignacy
• [Elecraft] Possible utility program conflict?   Bruce McLaughlin
  • [Elecraft] Possible utility program conflict?   Dick Dievendorff
• [Elecraft] K3 CW mode and key-out   Evert Bakker (PA2KW)
• [Elecraft] K3 Subreceiver problem   4CX250B
• [Elecraft] LINE OUT output too low?   André Santos
  • [Elecraft] LINE OUT output too low?   Don Wilhelm
    • [Elecraft] LINE OUT output too low?   André Santos
      • [Elecraft] LINE OUT output too low?   David Ferrington, M0XDF
      • [Elecraft] LINE OUT output too low?   Lyle Johnson
      • [Elecraft] LINE OUT output too low?   Jim Brown
      • [Elecraft] LINE OUT output too low?   Joe Subich, W4TV
      • [Elecraft] LINE OUT output too low?   Matt Zilmer
      • [Elecraft] LINE OUT output too low?   Paul Christensen
      • [Elecraft] LINE OUT output too low?   Jim Brown
      • [Elecraft] LINE OUT output too low?   Matt Zilmer
      • [Elecraft] LINE OUT output too low?   André Santos
      • [Elecraft] LINE OUT output too low?   Jim Brown
      • [Elecraft] LINE OUT output too low?   David Cutter
      • [Elecraft] LINE OUT output too low?   Jim Brown
      • [Elecraft] LINE OUT output too low?   Julian, G4ILO
      • [Elecraft] LINE OUT output too low?   Matt Zilmer
• [Elecraft] Strange problem when switching modes from VFO A to B   Jack Colson
  • [Elecraft] Strange problem when switching modes from VFO A to B   Don Wilhelm
  • [Elecraft] Strange problem when switching modes from VFO A to B   Dick Housden, W0NTA
• [Elecraft] Microphone Upgrade   -.-. --.-N3TU -.-. --.-
  • [Elecraft] Microphone Upgrade   David Fleming
    • [Elecraft] Microphone Upgrade   Don Wilhelm
  • [Elecraft] Microphone Upgrade   Jim Brown
    • [Elecraft] Microphone Upgrade   David Ricketts
    • [Elecraft] Microphone Upgrade   -.-. --.-N3TU -.-. --.-
• [Elecraft] Microphone Upgrade   Gary Smith
• [Elecraft] Elecraft CW Net Report for December 15th, 2008   Kevin Rock
• Fwd: [Elecraft] Strange problem when switching modes from VFO A to B   Gregory Fischer
• [Elecraft] Travel case for the K3   jac
• [Elecraft] [K3] f/w 2.73/1.98 power calibration   Steve Ward
• [Elecraft] K3 Request VFO round freq when coarse tune   Hugo pa4la
  • AW: [Elecraft] K3 Request VFO round freq when coarse tune   Michael Reichardt
• [Elecraft] FS - Elecraft K2-100 loaded with Accessories   Dave White
• [Elecraft] K3: ADC Ref calibration   Tom Whiteside
• [Elecraft] Strange problem when switching modes from VFO A to   Mike Scott
  • [Elecraft] Strange problem when switching modes from VFO A to   Trond Stubberud
• [Elecraft] K3 10-meter sensitivity   Tony - KM0O
  • [Elecraft] K3 10-meter sensitivity   ab2tc
  • [Elecraft] K3 10-meter sensitivity   Alexander Ponomarenko
  • [Elecraft] K3 10 meter contest   Ed Gray W0SD
• [Elecraft] K3 DVR Receive Status   Terry Schieler
• [Elecraft] K3 10-meter sensitivity   WILLIS COOKE
• [Elecraft] K3 sensitivity + preamp: looking for wisdom   DOUGLAS ZWIEBEL
  • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Darwin, Keith
  • [Elecraft] K3 sensitivity + preamp: looking for wisdom   WILLIS COOKE
  • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Julian, G4ILO
  • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Ron D'Eau Claire
    • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Ken Kopp
    • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Milt, N5IA
  • [Elecraft] K3 sensitivity + preamp: looking for wisdom   Evert Bakker (PA2KW)
• [Elecraft] Re: Strange problem when switching modes from VFO A to B   wayne burdick
  • [Elecraft] Re: Strange problem when switching modes from VFO A to B   Roger Marrotte
• [Elecraft] Microphone Upgrade   Jim Brown
• [Elecraft] Microphone Upgrade   Jim Brown
  • [Elecraft] Microphone Upgrade   Paul Christensen
    • [Elecraft] Microphone Upgrade   Jim Brown
      • [Elecraft] Microphone Upgrade   Paul Christensen
  • [Elecraft] Microphone Upgrade   Bill NY9H
    • [Elecraft] Microphone Upgrade   Gary Smith
      • [Elecraft] Microphone Upgrade   ON4WIX
• [K3] [Elecraft] f/w 2.73/1.98 power calibration   Richard Ferch
• [Elecraft] K3: the "strange problem" - pinched audio   DOUGLAS ZWIEBEL
  • [Elecraft] K3: the "strange problem" - pinched audio   Trond Stubberud
  • [Elecraft] K3: the "strange problem" - pinched audio   Dick Housden, W0NTA
• [Elecraft] Fixed: (1) power-on AF noise burst; (2) incorrect SSB TX filter settings after VFO swap   wayne burdick
• [Elecraft] Re: K3: ADC Ref calibration   wayne burdick
  • [Elecraft] Re: K3: ADC Ref calibration   chen dave
• [Elecraft] Re: K3: ADC Ref calibration   Tom Whiteside
  • [Elecraft] K3: ADC Ref calibration   VK5ABQ
    • [Elecraft] K3: ADC Ref calibration   Matt Zilmer
      • [Elecraft] K3: ADC Ref calibration   VK5ABQ
      • [Elecraft] K3: ADC Ref calibration   Matt Zilmer
      • [Elecraft] K3: ADC Ref calibration   VK5ABQ
• [Elecraft] K3: the 'strange problem' - pinched audio   Greg - AB7R
• [Elecraft] K3 CW Delay   Evert Bakker (PA2KW)
• [Elecraft] USB to serial that does not get stuck on CW on startup   Ignacy
  • [Elecraft] USB to serial that does not get stuck on CW on startup   Matt Zilmer
• [Elecraft] K3 power loss on 10 meter USB   Don Nelson
  • [Elecraft] K3 power loss on 10 meter USB   Don Nelson
    • [Elecraft] K3 power loss on 10 meter USB   Ignacy
• Fw: [Elecraft] Update Strange problem when switching modes from VFO A to B   Jack Colson
  • Fw: [Elecraft] Update Strange problem when switching modes from VFO A to B   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] MixW settings for K3   K2MK
  • [Elecraft] MixW settings for K3   Phil Kane
• [Elecraft] K3 for Sale   Jay Bromley
• [Elecraft] KUSB and Logger32   mm0gpz
• [Elecraft] K3 with SteppIR, MicroKeyer MK2 and IC-PW1 amp   Jim Spears
  • [Elecraft] K3 with SteppIR, MicroKeyer MK2 and IC-PW1 amp   Joe Subich, W4TV
• [Elecraft] ADC Ref Calibration   4CX250B
• [Elecraft] K3 Subreceiver problem   Tom
• [Elecraft] Brief loss of RX and TX on startup   Howard K2HK
• [Elecraft] K3 More Cool features   Don Rasmussen
  • [Elecraft] K3 More Cool features   VK5ABQ
• [Elecraft] Voltage shifter   OE5CSP-Chris
• [Elecraft] K3 feeling of knobs and switches   AB3EN
  • [Elecraft] Re: K3 feeling of knobs and switches   wayne burdick
    • [Elecraft] K3 feeling of knobs and switches   .k8dd.
      • [Elecraft] K3 feeling of knobs and switches   .k8dd.
      • [Elecraft] K3 feeling of knobs and switches   ab2tc
      • [Elecraft] K3 feeling of knobs and switches   .k8dd.
      • [Elecraft] K3 feeling of knobs and switches   wayne burdick
      • [Elecraft] Re: K3 feeling of knobs and switches   wayne burdick
      • [Elecraft] Re: K3 feeling of knobs and switches   O. Johns
      • [Elecraft] Re: K3 feeling of knobs and switches   drewko
• [Elecraft] Power out problems Rev 2.72   Frank Lammel
• [Elecraft] Power out problems Rev 2.72   Richard Ferch
• [Elecraft] K3 More Cool features   Don Rasmussen
  • [Elecraft] K3 More Cool features   David Ferrington, M0XDF
  • [Elecraft] K3 More Cool features   David Cutter
    • [Elecraft] K3 More Cool features   Bob
  • [Elecraft] K3 More Cool features   VK5ABQ
    • [Elecraft] K3 More Cool features   Maarten van Rossum
• [Elecraft] Question re K3 diversity reception   Dr. James C. Garland
  • [Elecraft] Re: Question re K3 diversity reception   wayne burdick
    • [Elecraft] Re: Question re K3 diversity reception   N2TK
      • [Elecraft] Re: Question re K3 diversity reception   wayne burdick
    • [Elecraft] Re: Question re K3 diversity reception   Jerry Flanders
      • [Elecraft] Re: Question re K3 diversity reception   wayne burdick
      • [Elecraft] Re: Question re K3 diversity reception   Ed Gray W0SD
      • [Elecraft] Re: Question re K3 diversity reception   wayne burdick
• [Elecraft] Re: Question re K3 diversity reception   w8zn at comcast.net
  • [Elecraft] Re: Question re K3 diversity reception   wayne burdick
• [Elecraft] KRX3 Installation ; ERR VCO 00227   ww2r2 at g4fre.com
• [Elecraft] K3 + Microkeyer II - RF into paddle input   g4amt at sennen-cove.com
  • [Elecraft] K3 + Microkeyer II - RF into paddle input   WA6L
    • [Elecraft] K3 + Microkeyer II - RF into paddle input   Joe Subich, W4TV
• [Elecraft] WB3AAL 1,000th QSO Report   Ron Polityka
• [Elecraft] Holland and Belgium K3   DOUGLAS ZWIEBEL
• [Elecraft] AF setting corrupting accurate MDS test   Rob, K6RFH
• [Elecraft] SELL: K3/100   Dave
• [Elecraft] K3 No 133   Keith Bainbridge
  • [Elecraft] K3 No 133   Bill W4ZV
  • [Elecraft] K3 No 133   W6NEK
• [Elecraft] Re: Question re K3 diversity reception   Julius Fazekas
  • [Elecraft] Re: Question re K3 diversity reception   Jerry Flanders
    • [Elecraft] Re: Question re K3 diversity reception   Jay Bromley
• [Elecraft] K3 S meter and AGC on/off   Steven.Zabarnick at notes.udayton.edu
• [Elecraft] Subreceiver   Jon K Hellan
  • [Elecraft] Subreceiver   Bill W4ZV
    • [Elecraft] Subreceiver   d.cutter at ntlworld.com
      • [Elecraft] Subreceiver   Bill W4ZV
• [Elecraft] K3 AF Mods   Bob Evans
• [Elecraft] K3: Date and Time Problem   W1GD at aol.com
  • [Elecraft] K3: Date and Time Problem   Ron D'Eau Claire
    • [Elecraft] K3: Date and Time Problem   Bill W4ZV
• [Elecraft] WTB/Trade TS-680S or similar   Niel Skousen
• [Elecraft] Halted by tiny screws   Benson
• [Elecraft] K3: Date and Time Problem   W1GD at aol.com
• [Elecraft] re: Halted by tiny screws   Benson
  • [Elecraft] re: Halted by tiny screws   Jack Smith
    • [Elecraft] re: Halted by tiny screws   Terry Schieler
• [Elecraft] K3 PK-232 FSK RTTY Setup   Ed Gray W0SD
  • [Elecraft] K3 PK-232 FSK RTTY Setup   Don Wilhelm
    • [Elecraft] K3 PK-232 FSK RTTY Setup   Ed Gray W0SD
      • [Elecraft] K3 PK-232 FSK RTTY Setup   Ed Gray W0SD
  • [Elecraft] K3 PK-232 FSK RTTY Setup   David Wilburn
    • [Elecraft] K3 PK-232 FSK RTTY Setup   Greg
    • [Elecraft] K3 PK-232 FSK RTTY Setup   Lyle Johnson
    • [Elecraft] K3 PK-232 FSK RTTY Setup   David Wilburn
• [Elecraft] 2/56 screws   DOUGLAS ZWIEBEL
• [Elecraft] K3 PK-232 FSK RTTY Setup   Richard Ferch
  • [Elecraft] K3 PK-232 FSK RTTY Setup   Ed Gray W0SD
• [Elecraft] AL-811H Amp and K3   Allan Bacon
  • [Elecraft] AL-811H Amp and K3   NZ0T
• [Elecraft] re: Halted by tiny screws   ni0c
• [Elecraft] Headphones   g4mkp
  • [Elecraft] Headphones   ab2tc
    • [Elecraft] Amplfied speakers   Tim Heasman
      • [Elecraft] Amplfied speakers   Jim Brown
      • [Elecraft] Amplfied speakers   Darwin, Keith
      • [Elecraft] Amplfied speakers   Jim
• [Elecraft] Roofing Filter question   Mike, W9QS
  • [Elecraft] Roofing Filter question   cstoverva at aol.com
  • [Elecraft] Roofing Filter question   Joe Planisky
    • [Elecraft] Roofing Filter question   Jim Brown
      • [Elecraft] Roofing Filter question   Andrew Faber
    • [Elecraft] Re: Roofing Filter question (+ some K3 receiver philosophy)   wayne burdick
      • [Elecraft] Re: Roofing Filter question (+ some K3 receiver philosophy)   Lance Collister, W7GJ
      • [Elecraft] Re: Variable-BW crystal filters   wayne burdick
      • [Elecraft] Re: Variable-BW crystal filters   Lance Collister, W7GJ
  • [Elecraft] Roofing Filter question   drewko
  • [Elecraft] Roofing Filter question   paul at n4lcd.com
• [Elecraft] Roofing Filter question   K4IA at aol.com
• [Elecraft] Re: Halted by tiny screws   Benson
• [Elecraft] K3 PK-232 FSK RTTY Setup   Richard Ferch
• [Elecraft] FS: K3/100 w/ KRX3 and LP-Pan/Emu 0202   Pat Cain K0PC
• [Elecraft] RE: Roofing Filters   Mike, W9QS
• [Elecraft] Any amplifier news?   David F. Reed
  • [Elecraft] Any amplifier news?   W0FK
    • [Elecraft] Any amplifier news?   Jeff Wandling W7BRS
      • [Elecraft] Any amplifier news?   W0FK
      • [Elecraft] Any amplifier news?   Monty Shultes
• [Elecraft] K2 40-Meter Transmitter Alignment   edwin.ebert
  • [Elecraft] K2 40-Meter Transmitter Alignment   Don Wilhelm
• [Elecraft] ESD Question!   capobs1 at bellsouth.net
  • [Elecraft] ESD Question!   Kurt Pawlikowski
    • [Elecraft] ESD Question!   Lyle Johnson
      • [Elecraft] ESD Question!   Nick-WA5BDU
      • [Elecraft] ESD Question!   Ron D'Eau Claire
      • [Elecraft] ESD Question!   Martin Sole
  • [Elecraft] ESD Question!   Dr. James C. Garland
• [Elecraft] Roofing Filter question   Fred Atchley
  • [Elecraft] Roofing Filter question   Barry N1EU
• [Elecraft] KX1 30/80 Assembly   Jay Sissom
  • [Elecraft] KX1 30/80 Assembly   Don Wilhelm
    • [Elecraft] KX1 30/80 Assembly   Jay Sissom
• [Elecraft] Amplified speakers   W0SZ
• [Elecraft] K3 - Speaker resonance   Fred Jensen
• [Elecraft] Power-on AF noise burst   W0SZ
  • [Elecraft] Re: Power-on AF noise burst   wayne burdick
• [Elecraft] K2 and separate KPA-100 for sale   Jim Wiley
• [Elecraft] ESD: final answer   DOUGLAS ZWIEBEL
• [Elecraft] K3 Operating Tip: Menu help text and factory default settings   wayne burdick
  • [Elecraft] K3 Operating Tip: Menu help text and factory default settings   gdaught6 at stanford.edu
    • [Elecraft] Re: K3 Operating Tip: Menu help text and factory default settings   wayne burdick
      • [Elecraft] Re: K3 Operating Tip: Menu help text and factory default settings   Fred Jensen
    • [Elecraft] K3 Operating Tip: Menu help text and factory defaultsettings   Greg
• [Elecraft] ESD mat measurements   Alan Bloom
  • [Elecraft] ESD mat measurements   Kurt Pawlikowski
  • [Elecraft] ESD mat measurements   Lyle Johnson
  • [Elecraft] ESD mat measurements   WILLIS COOKE
• [Elecraft] K3 Internal keyer question   Gary Smith
  • [Elecraft] Re: K3 Internal keyer question   wayne burdick
    • [Elecraft] K3 Internal keyer question   DK4XL
    • [Elecraft] Re: K3 Internal keyer question   Gary Smith
• [Elecraft] Any amplifier news?   Gary Gregory
  • [Elecraft] Any amplifier news?   dj7mgq at muenchen-mail.de
    • [Elecraft] Any amplifier news?   David Pratt
      • [Elecraft] Any amplifier news?   N2TK
• [Elecraft] K2 40-Meter Transmitter Alignment   edwin.ebert
• [Elecraft] Inrad 1.5 KHz filter for K3   Dave Hachadorian
  • [Elecraft] Inrad 1.5 KHz filter for K3   Ed Muns
• [Elecraft] ESD mat measurements   Rich Lentz (KE0X)
  • [Elecraft] ESD mat measurements   Alan Bloom
    • [Elecraft] ESD mat measurements   Nelson Moyer
• [Elecraft] Season Greatings   David Ferrington, M0XDF
• [Elecraft] anti-static (ESD) mat testing and recommendations   wayne burdick
  • [Elecraft] anti-static (ESD) mat testing and recommendations   Alan Bloom
• [Elecraft] Source of anti-static goodies   Jack Colson
• [Elecraft] Wiring the Shure 450 mic for K3   Benson
  • [Elecraft] Wiring the Shure 450 mic for K3   Don Wilhelm
    • [Elecraft] Wiring the Shure 450 mic for K3   Iain MacDonnell - N6ML
      • [Elecraft] Wiring the Shure 450 mic for K3   Don Wilhelm
      • [Elecraft] Wiring the Shure 450 mic for K3   Bill NY9H
• [Elecraft] And so it begins...   Gary Smith
• [Elecraft] Manual - Config Menu updates   Ralph Parker
  • [Elecraft] Manual - Config Menu updates   David Cutter
• [Elecraft] OT: help w/Skype   DOUGLAS ZWIEBEL
  • [Elecraft] OT: help w/Skype   S Sacco
    • [Elecraft] OT: help w/Skype   gdaught6 at stanford.edu
      • [Elecraft] OT: help w/Skype   Rick Kunath
  • [Elecraft] OT: help w/Skype   Clark B. Wierda (N8CBW)
• [Elecraft] Roofing Filter question   ni0c
• [Elecraft] OT: help w/Skype. THANKS!   DOUGLAS ZWIEBEL
• [Elecraft] KNB2 Mod... OK!   k7hbg at dslextreme.com
• [Elecraft] K2 - CAT   Fred Jensen
• [Elecraft] K3 Caution when using an external monaural speaker   TGahagan
  • [Elecraft] Re: K3 Caution when using an external monaural speaker   wayne burdick
    • [Elecraft] Re: K3 Caution when using an external monaural speaker   David Cutter
      • [Elecraft] Re: K3 Caution when using an external monaural speaker   wayne burdick
• [Elecraft] Re: K2 - CAT   hank k8dd
• [Elecraft] return to original frequency after using memory   PA3CVV
• [Elecraft] K3 Hardware Updates   Phil & Debbie Salas
  • [Elecraft] K3 Hardware Updates   David Ferrington, M0XDF
  • [Elecraft] K3 Hardware Updates   Bill W4ZV
    • [Elecraft] K3 Hardware Updates   Toby Deinhardt
      • [Elecraft] K3 Hardware Updates   Ron D'Eau Claire
      • [Elecraft] K3 Hardware Updates   Toby Deinhardt
    • [Elecraft] K3 Hardware Updates...TNX for hint   Bill NY9H
  • [Elecraft] K3 Hardware Updates   Lyle Johnson
    • [Elecraft] K3 Hardware Updates   Don Wilhelm
  • [Elecraft] K3 Hardware Updates   Ron D'Eau Claire
• [Elecraft] N2CQ QRP Contest Calendar: Dec 20 2008 - Jan 19 2009   Ken Newman
• [Elecraft] RTTY using LSB versus AFSK-A   K2MK
  • [Elecraft] RTTY using LSB versus AFSK-A   Lyle Johnson
    • [Elecraft] RTTY using LSB versus AFSK-A   Iain MacDonnell - N6ML
• [Elecraft] Re: RTTY using LSB versus AFSK-A   K2MK
• [Elecraft] Contest use of KRX3   Guy, K2AV
• [Elecraft] FS: K2 and/or KPA-100 + KAT-100   Jim Wiley
• [Elecraft] Re: RTTY using LSB versus AFSK-A   Richard Ferch
• [Elecraft] Re: RTTY using LSB versus AFSK-A   K2MK
• [Elecraft] Reminder - UK Elecraft net Sundays 1000 local, 3630 KHz   Dave G4AON
• [Elecraft] OT: new SS amps   DOUGLAS ZWIEBEL
  • [Elecraft] OT: new SS amps   Ron D'Eau Claire
    • [Elecraft] OT: new SS amps   WILLIS COOKE
      • [Elecraft] OT: new SS amps   chen dave
      • [Elecraft] OT: new SS amps   Bruce McLaughlin
  • [Elecraft] OT: new SS amps   Sandy
    • [Elecraft] OT: new SS amps   WILLIS COOKE
      • [Elecraft] OT: new SS amps   Don Wilhelm
      • [Elecraft] OT: new SS amps   Sandy
  • [Elecraft] OT: new SS amps   Vic K2VCO
    • [Elecraft] OT: new SS amps   Jim
    • [Elecraft] OT: new SS amps   Joe Subich, W4TV
• [Elecraft] k3 matching filters   aa1o
  • [Elecraft] k3 matching filters   WILLIS COOKE
    • [Elecraft] k3 matching filters   Lyle Johnson
  • [Elecraft] k3 matching filters   aa1o
    • [Elecraft] k3 matching filters   Lyle Johnson
      • [Elecraft] k3 matching filters   aa1o
      • [Elecraft] k3 matching filters   Lyle Johnson
      • [Elecraft] k3 matching filters   GW0ETF
      • [Elecraft] k3 matching filters   Don Wilhelm
• [Elecraft] K3: RX dead, need help   DM4iM
  • [Elecraft] K3: RX dead, need help   AD6XY
• [Elecraft] Dual PB   Dan Atchison
• [Elecraft] K3, MMTTY, Micro Keyer, laptop   Robert & Charlotte Higgins
• [Elecraft] ALC mod, Stereo speaker mod, pull-up resistor mod   Monty Shultes
• [Elecraft] k3 matching filters   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K2: For sale: QRP Version WITH KAF2; KSB2; K160RX; KNB2; KAT2   Daniel Paul Perez
• [Elecraft] KX1 / K1-4: Wanted to Trade for KX1 or K1   Daniel Paul Perez
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] K3 Power out   Gary Smith
  • [Elecraft] K3 Power out   Ron D'Eau Claire
    • [Elecraft] K3 Power out   Jim W7RY
      • [Elecraft] K3 Power out   Ron D'Eau Claire
    • [Elecraft] K3 Power out   Jan Erik Holm
      • [Elecraft] K3 Power out   Jan Erik Holm
      • [Elecraft] K3 Power out   David Woolley (E.L)
      • [Elecraft] K3 Power out   Leigh L. Klotz, Jr WA5ZNU
      • [Elecraft] K3 Power out   Bill W4ZV
      • [Elecraft] K3 Power out   Jan Erik Holm
  • [Elecraft] K3 Power out   chen dave
• [Elecraft] K3 Panel Screws - I'm Not Alone   John Sims
• [Elecraft] [K3] f/w 2.73/1.98 power calibration   Steve Ward
• [Elecraft] UK Elecraft net report for Sunday 21st December   Dave G4AON
  • [Elecraft] UK Elecraft net report for Sunday 21st December   Trevor Smithers
• [Elecraft] even further OT: new SS amps   DOUGLAS ZWIEBEL
  • [Elecraft] even further OT: new SS amps   Joe Subich, W4TV
    • [Elecraft] even further OT: new SS amps   DOUGLAS ZWIEBEL
• [Elecraft] K3: pwr out - does this sound right?   DOUGLAS ZWIEBEL
  • [Elecraft] K3: pwr out - does this sound right?   Don Wilhelm
    • [Elecraft] K3: pwr out - does this sound right?   Joe Subich, W4TV
• [Elecraft] Microphone question - K3   NZ0T
  • [Elecraft] Microphone question - K3   Lyle Johnson
    • [Elecraft] Microphone question - K3   NZ0T
      • [Elecraft] Microphone question - K3   Don Wilhelm
      • [Elecraft] Microphone question - K3   NZ0T
      • [Elecraft] Microphone question - K3   Don Wilhelm
      • [Elecraft] Microphone question - K3   Dave Yarnes
      • [Elecraft] Microphone question - K3   NZ0T
• [Elecraft] K3: pwr out - does this sound right?   Dave G4AON
  • [Elecraft] K3: pwr out - does this sound right?   Brian Alsop
• [Elecraft] K3 Measured Power Output versus Commanded Power Output   Jack Smith
• Fw: [Elecraft] OT: new SS amps...more   Sandy
• [Elecraft] No Audio for Paddle on K3/10   Frank MacDonell
  • [Elecraft] No Audio for Paddle on K3/10   Don Wilhelm
• [Elecraft] K3: Rx dead, need help. More details   DM4iM
  • [Elecraft] K3: Rx dead, need help. More details   AD6XY
• [Elecraft] K3 Panel Screws - I'm Not Alone   Ron - PE8E
  • [Elecraft] K3 Panel Screws - I'm Not Alone   AD6XY
  • [Elecraft] KRX3 , Mod Comments & K3 Screws   John Sims
• [Elecraft] Err Pl2   Randy Downs
• [Elecraft] K3: power out & V, A readings   DOUGLAS ZWIEBEL
  • [Elecraft] K3: power out & V, A readings   Ron D'Eau Claire
    • [Elecraft] K3: power out & V, A readings   Ignacy
  • [Elecraft] K3: power out & V, A readings   Joe Subich, W4TV
• [Elecraft] Fwd: Hallicrafter Goes to war - the original BC-610   Aubrey
• [Elecraft] Fw: Err Pl2   Randy Downs
  • [Elecraft] Fw: Err Pl2   Randy Downs
    • [Elecraft] ERR PL2 (or ERR PL1, or ERR VCO): tentative solution   wayne burdick
• [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Tony Fegan VE3QF
  • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   David Cutter
• [Elecraft] K3 Hardware Updates   Benson
• [Elecraft] OT: new SS amps   w6jd at comcast.net
  • [Elecraft] OT: new SS amps   Jim Brown
• [Elecraft] K3 VFO A tension   Gary Smith
  • [Elecraft] K3 VFO A tension   Don Wilhelm
    • [Elecraft] K3 VFO A tension   Gary Smith
• [Elecraft] K3 power in RTTY   Bob Tellefsen
  • [Elecraft] K3 power in RTTY   Julian, G4ILO
    • [Elecraft] K3 power in RTTY   Bob Tellefsen
• [Elecraft] FS: K2 and/or KPA-100 + KAT-100   Jim Wiley
• [Elecraft] Re: [Moon-net] WSJT and K3   Lance Collister, W7GJ
• [Elecraft] Excellent control software TRX-Manager   VE3NFK
• [Elecraft] K3 VFO A tension   DOUGLAS ZWIEBEL
  • [Elecraft] K3 VFO A tension   Gary Smith
    • [Elecraft] K3 VFO A tension   Bob
  • [Elecraft] K3 VFO A tension   W7TMT
    • [Elecraft] K3 VFO A tension   Gary Smith
      • [Elecraft] K3 VFO A tension   VK5ABQ
      • [Elecraft] K3 VFO A tension   Stewart Baker
      • [Elecraft] K3 VFO A tension AND Felt Hiss - Resolved   Gary Smith
• [Elecraft] TX INHIBIT   Niko Cimbur
• [Elecraft] Elecraft CW Net Report for December 22nd, 2008   Kevin Rock
  • [Elecraft] Elecraft CW Net Report for December 22nd, 2008   Phil and Christina
  • [Elecraft] Elecraft CW Net Report for December 22nd, 2008   Fred Jensen
• [Elecraft] Fwd: Solstice Meteor Shower   Aubrey
• [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Tony Fegan VE3QF
  • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Barry N1EU
    • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Ignacy
    • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Lyle Johnson
      • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Tony Fegan VE3QF
• [Elecraft] KPA-1500 KPA-800   Gary Gregory
  • [Elecraft] KPA-1500 KPA-800   AD6XY
    • [Elecraft] KPA-1500 KPA-800   Jeff Wandling W7BRS
      • [Elecraft] KPA-1500 KPA-800   michael taylor
  • [Elecraft] KPA-1500 KPA-800   Bill Johnson
• [Elecraft] K3 - VCO Calibration temperature   Stewart Baker
  • [Elecraft] Re: K3 - VCO Calibration temperature   wayne burdick
• [Elecraft] DVR play in TX mode   LB3SA
  • [Elecraft] DVR play in TX mode   Iain MacDonnell - N6ML
    • [Elecraft] DVR play in TX mode   LB3SA
      • [Elecraft] DVR play in TX mode   Iain MacDonnell - N6ML
      • [Elecraft] DVR play in TX mode   LB3SA
• [Elecraft] K3 VFO A tension   Missouri Guy
• [Elecraft] K3 VFO A tension AND Felt Hiss - Resolved   Gary Smith
• [Elecraft] Amplifiers   Ralph Parker
  • [Elecraft] Amplifiers   Jim Miller
  • [Elecraft] Amplifiers   Stan Rife
  • [Elecraft] KPA Amplifiers   Stan Rife
• [Elecraft] K3 Request VFO round freq when coarse tune   Roy Morris
• [Elecraft] K3 Request VFO round freq when coarse tune   Dave G4AON
  • [Elecraft] Re: K3 Request VFO round freq when coarse tune   wayne burdick
• [Elecraft] Cannot adjust center frequency after update to 2.73   LB3SA
  • [Elecraft] Cannot adjust center frequency after update to 2.73   Guy, K2AV
    • [Elecraft] Cannot adjust center frequency after update to 2.73   LB3SA
      • [Elecraft] K3: Firmware Request   list1
      • [Elecraft] Re: K3: Firmware Request   wayne burdick
      • [Elecraft] K3: Firmware Request   David F. Reed
• [Elecraft] RE: Any Amplifier News   Dave Agsten
  • [Elecraft] RE: Any Amplifier News   N2TK
  • [Elecraft] RE: Any Amplifier News   Eric Tichansky
    • [Elecraft] RE: Any Amplifier News   Mitch Wolfson DJØQN
      • [Elecraft] RE: Any Amplifier News   Jan Erik Holm
      • [Elecraft] RE: Any Amplifier News   Mitch Wolfson DJØQN
      • [Elecraft] RE: Any Amplifier News   Kevin Luxford
      • [Elecraft] RE: Any Amplifier News   dj7mgq at muenchen-mail.de
      • [Elecraft] RE: Any Amplifier News   k4tmc at aol.com
      • [Elecraft] RE: Any Amplifier News   Jan Erik Holm
• [Elecraft] Bug in split ?   Randy Downs
• [Elecraft] KX1 Newby Help!   Burke Jones
  • [Elecraft] KX1 Newby Help!   Don Wilhelm
    • [Elecraft] KX1 Newby Help!   Burke Jones
• [Elecraft] AGC reverts to slow when engaging auto tune function in v 2.67   AMFMTV at aol.com
• [Elecraft] Re: Amplifiers   Dave Agsten
  • [Elecraft] Re: Amplifiers   Don Wilhelm
• [Elecraft] [K2] unpcbs.com Website Outage   Gary Hvizdak
• [Elecraft] K3 Synthesizer ALC Modification Doc now available   wayne burdick
• [Elecraft] K-3 2.7 KHz 5 pole filter offset   Ron Midwin
• [Elecraft] Logic 8 redux   Gary Smith
  • [Elecraft] Logic 8 redux   VE3NFK
• [Elecraft] announcing the KPA2000   DOUGLAS ZWIEBEL
  • [Elecraft] Re: announcing the KPA2000   wayne burdick
    • [Elecraft] announcing the KPA2000   W0FK
• [Elecraft] K2 building problem   Gary Auchard
  • [Elecraft] K2 building problem   Don Wilhelm
• [Elecraft] Firmware Request all rigs   Kevin Rock
  • [Elecraft] Firmware Request all rigs   WILLIS COOKE
    • [Elecraft] Firmware Request all rigs   Dale Putnam
• [Elecraft] K3 CW decoder   Jeff Wandling W7BRS
  • [Elecraft] K3 CW decoder   W2XB
• [Elecraft] RE: KPA-800 1500   Gary Gregory
• [Elecraft] K3: New Inrad 500 hz filter   William G. McDowell
  • [Elecraft] K3: New Inrad 500 hz filter   Bill W4ZV
    • [Elecraft] K3: New Inrad 500 hz filter   Bill W4ZV
    • [Elecraft] K3: New Inrad 500 hz filter   Barry N1EU
    • [Elecraft] K3: New Inrad 500 hz filter   Iain MacDonnell - N6ML
      • [Elecraft] K3: New Inrad 500 hz filter   Rick Tavan N6XI
• [Elecraft] K3: INRAD what happened to the 1500hz filter?   DOUGLAS ZWIEBEL
• [Elecraft] Re: [Elecraft Digest] KX1 Newby Help!   Paul Huff
• [Elecraft] Re:K2 building problem   Jon Perelstein
• [Elecraft] Stuff   Gary Smith
• [Elecraft] K3 - KRX3   Robert Dorchuck
• [Elecraft] CW and data   Robert Klein
  • [Elecraft] CW and data   Ken Kopp
  • [Elecraft] Re: CW and data   wayne burdick
    • [Elecraft] CW and data   Julian, G4ILO
• [Elecraft] 50 and 100 DSP positions   W8ZN at comcast.net
  • [Elecraft] 50 and 100 DSP positions   WILLIS COOKE
  • [Elecraft] 50 and 100 DSP positions   lyle johnson
    • [Elecraft] Request   Ignacy
  • [Elecraft] 50 and 100 DSP positions   Ignacy
• [Elecraft] 50 and 100 DSP positions   W8ZN at comcast.net
• [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   wayne burdick
  • [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst   Bill NY9H
  • [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   Dick Housden, W0NTA
  • [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   Stewart Baker
    • [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   Christopher Kovacs
      • [Elecraft] Re: K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   wayne burdick
      • [Elecraft] Re: K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   Iain MacDonnell - N6ML
      • [Elecraft] Re: K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.   Christopher Kovacs
      • [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTNindependent for sub RX; etc.   Mike Short
• [Elecraft] K3 Synthesizer ALC Mod   Roy Morris
  • [Elecraft] K3 Synthesizer ALC Mod   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] K3 Synthesizer ALC Mod   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] K3 Synthesizer ALC Mod   Randy Downs
• [Elecraft] OT: FS Tektronix 465, 100 MHz dual trace scope   Jim Sheldon
• [Elecraft] FW Loading error   a.yoshida
  • [Elecraft] FW Loading error   a.yoshida
  • [Elecraft] FW Loading error   Dick Dievendorff
• [Elecraft] 6 meters   Phil LaMarche
  • [Elecraft] Re: 6 meters   wayne burdick
  • [Elecraft] 6 meters   K7WIA
  • [Elecraft] 6 meters   K8TB
    • [Elecraft] 6 meters   Brendan Minish
• [Elecraft] K1 Deaf   Michael - VE3MKX
  • [Elecraft] K1 Deaf   Don Wilhelm
  • [Elecraft] K1 Deaf   Joseph M. Durnal
• [Elecraft] PR6 use with 1 antenna   EC7ANC Manolo
  • [Elecraft] PR6 use with 1 antenna   Greg
• [Elecraft] Walwart power?   Burke Jones
  • [Elecraft] Walwart power?   Dick Dievendorff
  • [Elecraft] Walwart power?   Don Wilhelm
    • [Elecraft] Walwart power?   Burke Jones
  • [Elecraft] Walwart power?   michael taylor
    • [Elecraft] Walwart power?   John R. Lonigro
      • [Elecraft] Walwart power?   Jim W7RY
      • [Elecraft] Walwart power?   list1
  • [Elecraft] Walwart power?   n0tk at aol.com
  • [Elecraft] Walwart power?   Bernie Gardner
  • [Elecraft] Walwart power?   Bob Nielsen
  • [Elecraft] Walwart power?   rkayakr
• [Elecraft] K3 and noise   Ron Kenwood
  • [Elecraft] K3 and noise   David Woolley
  • [Elecraft] K3 and noise   Gary NL7Y
    • [Elecraft] K3 and noise   Bill W5WVO
• [Elecraft] RE: Any Amplifier News   JohnK1JD
• [Elecraft] Audio blast fixed   Mike Scott
  • [Elecraft] Audio blast fixed   Iain MacDonnell - N6ML
• [Elecraft] New K3 On the Air   Jim Wilson
• [Elecraft] saving RX EQ per mode   Todd Ruby
  • [Elecraft] saving RX EQ per mode   Dick Dievendorff
    • [Elecraft] saving RX EQ per mode   Ignacy
      • [Elecraft] saving RX EQ per mode   NZ0T
      • [Elecraft] saving RX EQ per mode   Iain MacDonnell - N6ML
      • [Elecraft] saving RX EQ per mode   NZ0T
• [Elecraft] K3-tuning knob paint   Bob W9RFS
• [Elecraft] Proper Heil Microphone Adapter?   Jeff Maass
  • [Elecraft] Proper Heil Microphone Adapter?   Dick Roth, KA1OZ
  • [Elecraft] Proper Heil Microphone Adapter?   Don Wilhelm
    • [Elecraft] Proper Heil Microphone Adapter?   Jeff Maass
• [Elecraft] K3 arrivals   Keith Bainbridge
• [Elecraft] K3 on VLF   David Pratt
• [Elecraft] K3 QRP output power level   Richard Haendel
  • [Elecraft] K3 QRP output power level   Dick Dievendorff
    • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Frank R. Oppedijk
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Barry N1EU
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Bruce McLaughlin
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Frank R. Oppedijk
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Barry N1EU
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Frank R. Oppedijk
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Gregory Fischer
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Barry N1EU
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Frank R. Oppedijk
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Bruce McLaughlin
      • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   WILLIS COOKE
  • [Elecraft] K3 QRP output power level   Don Wilhelm
• [Elecraft] RE: 6 Meters   Dave Agsten
• [Elecraft] OT - Holiday wishes   Joe Stofko
• [Elecraft] Re: Christmas 2008   Robert C.Abell
• [Elecraft] Thank you!   Phil LaMarche
  • [Elecraft] Thank you!   Jim Brown
• [Elecraft] happy holidays   DOUGLAS ZWIEBEL
  • [Elecraft] happy holidays   Jan Erik Holm
    • [Elecraft] happy holidays   Dave Yarnes
      • [Elecraft] happy holidays   Vic Rosenthal [TSI]
• [Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Barry N1EU
• [Elecraft] A K3 Variation of SKN   Dave Yarnes
  • [Elecraft] A K3 Variation of SKN   David Pratt
    • [Elecraft] A K3 Variation of SKN   Tom Hammond
      • [Elecraft] A K3 Variation of SKN   WILLIS COOKE
• [Elecraft] A K3 Variation of SKN   Jim W7RY
• [Elecraft] happy holidays to Wayne and Eric and tnx for the K3   O. Johns
• [Elecraft] Jack on bottom of K3?   David F. Reed
  • [Elecraft] Jack on bottom of K3?   Ron D'Eau Claire
• [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Joe Subich, W4TV
  • [Elecraft] K3 SSB Contour Filter (reduce total bandwidth)   Stephen Prior
• [Elecraft] Looking for an Elecraft BL2 balun   NZ8J
• [Elecraft] K3 Utility version 1.1.12.22 now available on Elecraft web site   Dick Dievendorff
  • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   wayne burdick
    • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   NZ0T
      • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   NZ0T
      • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Gary Smith
      • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dick Dievendorff
    • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dick Roth, KA1OZ
• [Elecraft] Happy Holidays   Ken Kopp
• [Elecraft] K3 Firmware Download Utility   Doug Joyce
  • [Elecraft] K3 Firmware Download Utility   Bill Johnson
  • [Elecraft] K3 Firmware Download Utility   Dick Dievendorff
• [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W,   Bruce Beford
• [Elecraft] complements to *both* chefs of K3 Utility   wayne burdick
• [Elecraft] K3: component location on circuit diagram   David Lankshear
  • [Elecraft] Re: K3: component location on circuit diagram   wayne burdick
  • [Elecraft] K3: component location on circuit diagram   W7TMT
  • [Elecraft] K3: component location on circuit diagram   Tom Hammond
• [Elecraft] FW: KRX3 MAIN input   R. Dean Straw
• [Elecraft] K3: component location on circuit diagram   David Lankshear
• [Elecraft] Re: Elecraft Digest, Vol 56, Issue 39   Barry Middleton
• [Elecraft] New XMIT Gain cal feature   Bruce Meier
• [Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   K2MK
  • [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Barry N1EU
  • [Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   Gregory Fischer
• [Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna   K2MK
• [Elecraft] Christmas K3 (PW-1)   Michael M. Raskin
• FW: [Elecraft] Running an ICOM PW-1 Amp with the K3   John E. Reiser
• [Elecraft] K3 --- stopped XMIT during SSB QSO   tom kenville
  • [Elecraft] K3 --- stopped XMIT during SSB QSO   Tony Fegan VE3QF
  • [Elecraft] K3 --- stopped XMIT during SSB QSO   David Fleming
  • [Elecraft] K3 --- stopped XMIT during SSB QSO   Simon (HB9DRV)
    • [Elecraft] K3 --- stopped XMIT during SSB QSO   Jim Brown
• [Elecraft] Auto TX Gain Routine....and a little problem   n6ax at speakeasy.net
• [Elecraft] K3 Utility Install/Uninstall   Paul Kirley
  • [Elecraft] K3 Utility Install/Uninstall   Dick Dievendorff
• [Elecraft] Automated Transmitter Gain Calibration   Larry P. Greenberg
  • [Elecraft] Automated Transmitter Gain Calibration   Dave Van Wallaghen
    • [Elecraft] Automated Transmitter Gain Calibration   NZ0T
      • [Elecraft] Automated Transmitter Gain Calibration   dieven at comcast.net
  • [Elecraft] Automated Transmitter Gain Calibration   Dick Dievendorff
• [Elecraft] KIO2 connect to Ubuntu Linux   Arthur Gunn
  • [Elecraft] KIO2 connect to Ubuntu Linux   Bob Nielsen
  • [Elecraft] KIO2 connect to Ubuntu Linux   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] ERR VCO after installing KRX3   Dick Grolleman
  • [Elecraft] ERR VCO after installing KRX3   aa1o
  • [Elecraft] ERR VCO after installing KRX3   Dick Grolleman
• [Elecraft] Rev. 2.76 issue   Robert Klein
  • [Elecraft] Rev. 2.76 issue   Ed Muns
• [Elecraft] K3 - KAT3 C10 blew up!   J. Heide
• [Elecraft] K3: Automated Transmit Gain Calibration   Raymond METZGER
• [Elecraft] Automated Transmitter Gain Calibration - accolade   Don Nelson
  • [Elecraft] Automated Transmitter Gain Calibration - accolade   Dick Dievendorff
• [Elecraft] K3 :: inboard voltmeter and ammeter   inventor_sixty_one
  • [Elecraft] K3 :: inboard voltmeter and ammeter   Don Wilhelm
• [Elecraft] K3 :: "ERR PL2" message   inventor_sixty_one
  • [Elecraft] K3 :: "ERR PL2" message   Iain MacDonnell - N6ML
• [Elecraft] Re: Elecraft Digest, Vol 56, Issue 41   Robert Klein
• [Elecraft] K3 :: ERR PL2 message no longer occurring   inventor_sixty_one
• [Elecraft] Transmit when switching from DATA to AM mode?   Joe Planisky
• FW: [Elecraft] Running an ICOM PW-1 Amp with the K3   John E. Reiser
  • FW: [Elecraft] Running an ICOM PW-1 Amp with the K3   Igor Sokolov
• [Elecraft] Transmit when switching from DATA to AM mode?   John Buck
  • [Elecraft] Transmit when switching from DATA to AM mode?   David F. Reed
  • [Elecraft] Transmit when switching from DATA to AM mode?   Grant Youngman
  • [Elecraft] Transmit when switching from DATA to AM mode?   Ken K3IU
    • [Elecraft] Transmit when switching from DATA to AM mode?   Ken K3IU
      • [Elecraft] Transmit when switching from DATA to AM mode?   Ron D'Eau Claire
  • [Elecraft] Transmit when switching from DATA to AM mode?   AB3EN
  • [Elecraft] Transmit when switching from DATA to AM mode?   Roger Marrotte
    • [Elecraft] Transmit when switching from DATA to AM mode?   Joe Subich, W4TV
  • [Elecraft] Transmit when switching from DATA to AM mode?   Larry K1UO
    • [Elecraft] Transmit when switching from DATA to AM mode?   Larry K1UO
• [Elecraft] K3 power supply   Gary Smith
  • [Elecraft] K3 power supply   Leigh L. Klotz, Jr WA5ZNU
    • [Elecraft] K3 power supply   Dave Yarnes
  • [Elecraft] K3 power supply   WILLIS COOKE
  • [Elecraft] K3 power supply   Matt Zilmer
    • [Elecraft] K3 power supply   Ken Kopp
    • [Elecraft] K3 power supply   Jim Brown
      • [Elecraft] K3 power supply   Ron D'Eau Claire
  • [Elecraft] K3 power supply   Gary Smith
• [Elecraft] K3 compatibility with Win Test   Dick Hanson
  • [Elecraft] K3 compatibility with Win Test   hank k8dd
• [Elecraft] OT: Odd 40M signal?   Ken Kopp
  • [Elecraft] OT: Odd 40M signal?   Matt Zilmer
  • [Elecraft] OT: Odd 40M signal?   Tom
    • [Elecraft] OT: Odd 40M signal?   Ken Kopp
      • [Elecraft] OT: Odd 40M signal?   Matt Zilmer
  • [Elecraft] OT: Odd 40M signal?   Dave Yarnes
  • [Elecraft] OT: Odd 40M signal?   Richard L. King
• [Elecraft] PTT RLS   hb9ari
• [Elecraft] PTT RLS Found   hb9ari
• [Elecraft] PTT RLS   Dave G4AON
• [Elecraft] K3 power supply   Dave G4AON
• [Elecraft] K2 #6593 Transmit Performance   m0trx
  • [Elecraft] K2 #6593 Transmit Performance   Don Wilhelm
    • [Elecraft] K2 #6593 Transmit Performance   m0trx
      • [Elecraft] K2 #6593 Transmit Performance   Don Wilhelm
• [Elecraft] KIO2 connect to Ubuntu Linuxl   DM4iM
• [Elecraft] Re: Transmit when switching from DATA to AM mode?   K2MK
  • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Bill Coleman N2BC
    • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Greg
      • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Bill Coleman N2BC
      • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Ken K3IU
      • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Ken K3IU
      • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Joe Planisky
      • [Elecraft] Re: Transmit when switching from DATA to AM mode?   Roy Davis
• [Elecraft] KRX3 - ATU or BNC   James Kohnke (W6VAR)
  • [Elecraft] KRX3 - ATU or BNC   Vic K2VCO
    • [Elecraft] KRX3 - ATU or BNC   Tom
• [Elecraft] KRX3 - BNC or ATU?   Jim - W6VAR
• [Elecraft] Transmit when switching from DATA to AM mode?   David F. Reed
  • [Elecraft] Transmit when switching from DATA to AM mode?   Ron D'Eau Claire
• [Elecraft] KPAI03 install?   W5CEM
• [Elecraft] Elecraft CW Net announcement   Sam Binkley
• [Elecraft] (no subject)   Todd Ruby
  • [Elecraft] (no subject)   Don Wilhelm
• [Elecraft] Power Calibration - Transverter   Jim - W6VAR
  • [Elecraft] Power Calibration - Transverter   Dick Dievendorff
    • [Elecraft] Power Calibration - Transverter   Jim - W6VAR
      • [Elecraft] Power Calibration - Transverter   Dick Dievendorff
    • [Elecraft] Power Calibration - Transverter   Jim - W6VAR
      • [Elecraft] Power Calibration - Transverter   Dick Dievendorff
• [Elecraft] Loud burst of audio   Roy Davis
• [Elecraft] AM   Todd Ruby
• [Elecraft] KRX3 - ATU or BNC   Benny Aumala
• [Elecraft] OT: (Price Reduced) FS Tektronix 465, 100 MHz dual trace scope   Jim Sheldon
• [Elecraft] Problem With Getting CW To Work   -.-. --.-N3TU -.-. --.-
  • [Elecraft] Problem With Getting CW To Work   Don Wilhelm
    • [Elecraft] Problem With Getting CW To Work   -.-. --.-N3TU -.-. --.-
      • [Elecraft] Problem With Getting CW To Work   Don Wilhelm
• [Elecraft] K3 250Hz Filter gain maxed yet low   Jim Miller
  • [Elecraft] K3 250Hz Filter gain maxed yet low   Don Wilhelm
    • [Elecraft] K3 250Hz Filter gain maxed yet low   Jim Miller
      • [Elecraft] K3 250Hz Filter gain maxed yet low   W7TEA
      • [Elecraft] K3 250Hz Filter gain maxed yet low   Bill W4ZV
      • [Elecraft] K3 250Hz Filter gain maxed yet low   Jim Miller
• [Elecraft] Computer SSB Problesm   Ken Widelitz
• [Elecraft] RE: K3 250Hz Filter gain maxed yet low   K2MK
  • [Elecraft] Re: K3 250Hz Filter gain maxed yet low   Jim Miller
• [Elecraft] Problem With Getting CW To Work   DOUGLAS ZWIEBEL
• [Elecraft] OT: FS: SOLD pending funds (Price Reduced) FS Tektronix 465, 100 MHz dual trace scope   Jim Sheldon
• [Elecraft] Low Power Out   Ed K1EP
• [Elecraft] Problem With Getting CW To Work   DOUGLAS ZWIEBEL
• [Elecraft] K-3 and Icom 4-KL Linear   Frederick W. Holmes, W1SKU
• [Elecraft] K3 AF Amp Protection Mod   Roy Morris
• [Elecraft] KRX3 Problem   Randy Downs
  • [Elecraft] KRX3 Problem   Barry N1EU
• [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dave G4AON
  • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dick Dievendorff
    • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Ken K3IU
      • [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dick Dievendorff
  • [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   jeff kb2m
    • [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   Dick Dievendorff
    • [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   Tom
• [Elecraft] KRX3 Problem   Randy Downs
• [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW   Dick Dievendorff
• [Elecraft] Reminder - UK Elecraft net Sundays 1000 local, 3630 KHz   Dave G4AON
• [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   jeff kb2m
  • [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   Dick Dievendorff
    • [Elecraft] Automated Transmit Gain Calibration at 5 W, 50W, err txf   jeff kb2m
• [Elecraft] K2 Rig to Computer and Paddle cable   Edward R. Breneiser
• [K3] [Elecraft] High Audio   Joe G
  • [K3] [Elecraft] High Audio   Ron D'Eau Claire
  • [K3] [Elecraft] High Audio   Joe Subich, W4TV
  • [K3] [Elecraft] High Audio   Greg
• [Elecraft] ftp file   Todd Ruby
  • [Elecraft] ftp file   Dick Dievendorff
• [Elecraft] KRX3 Problem   Randy Downs
• [Elecraft] KPA 100 Low power on 160M   Andrew Lenton (Linux account)
• [Elecraft] 6 meters   Phil LaMarche
• [Elecraft] ftp file   Dave G4AON
  • [Elecraft] ftp file   Cady, Fred
    • [Elecraft] ftp file   Dr. Werner Furlan
• [Elecraft] [K3] Are Elecraft open over holidays   David Ferrington, M0XDF
• [Elecraft] [K3] Are Elecraft open over holidays   David Ferrington, M0XDF
• [Elecraft] K3 and MixW audio input volume   Peter ZL1PWD
  • [Elecraft] K3 and MixW audio input volume   Greg
• [Elecraft] K-2 alignment and Test - Part 1 problem   Larry Wright
  • [Elecraft] K-2 alignment and Test - Part 1 problem   Don Wilhelm
• [Elecraft] S meter calibration?   K7WIA
  • [Elecraft] S meter calibration?   Ed Muns
    • [Elecraft] S meter calibration?   K7WIA
  • [Elecraft] S meter calibration?   K7WIA
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] K3 and MixW audio input volume   K2MK
• [Elecraft] KRX3 Problem Update   Randy Downs
• [Elecraft] KX-1 Trouble...   Burke Jones
  • [Elecraft] KX-1 Trouble...   Don Wilhelm
• [Elecraft] Problems With Six Meters   -.-. --.-N3TU -.-. --.-
• [Elecraft] K3 Memory Recall - Acting Like Band Select   Jim - W6VAR
  • [Elecraft] K3 Memory Recall - Acting Like Band Select   Barry Simpson
    • [Elecraft] K3 Memory Recall - Acting Like Band Select   Jim - W6VAR
      • [Elecraft] K3 Memory Recall - Acting Like Band Select   Don Wilhelm
      • [Elecraft] K3 Memory Recall - Acting Like Band Select   Barry Simpson
  • [Elecraft] K3 Memory Recall - Acting Like Band Select   Jim - W6VAR
• [Elecraft] UK Elecraft net report for Sunday 28th December   Dave G4AON
• [Elecraft] K3 AM & FM Proble Firmware 2.67   John Petters
  • [Elecraft] K3 AM & FM Proble Firmware 2.67   Don Wilhelm
• [Elecraft] K3 AM & FM Proble Firmware 2.67   Dave G4AON
  • [Elecraft] K3 AM & FM Proble Firmware 2.67   John A. McCabe
• [Elecraft] Question on Squelch; why not in other modes?   Eivind L. Reiersen
  • [Elecraft] Re: Question on Squelch; why not in other modes?   wayne burdick
    • [Elecraft] Squelch for non-FM modes   Ken Kopp
• [Elecraft] K3 AM & FM Proble Firmware 2.67   John Petters
• [Elecraft] K3 Utility doesn't respond   Colin Whitmore
  • [Elecraft] K3 Utility doesn't respond   Dick Dievendorff
• [Elecraft] Automatic diversity configuration   joachim.groeger at ewetel.net
  • [Elecraft] Re: Automatic diversity configuration   wayne burdick
    • [Elecraft] Re: Automatic diversity configuration   Bruce McLaughlin
    • [Elecraft] Automatic diversity configuration   Guy, K2AV
      • [Elecraft] Automatic diversity configuration   Barry N1EU
• [Elecraft] K3 - 6M issues   N2TK
• [Elecraft] K3 - Now, just waiting for ...   Ken Kopp
• [Elecraft] K3: Using 40m Loop for 10m   492commish at comcast.net
  • [Elecraft] K3: Using 40m Loop for 10m   David Cutter
• [Elecraft] [K3] Short TX burst when changing mode from Data to AM   Karza
  • [Elecraft] [K3] Short TX burst when changing mode from Data to AM   Joe Planisky
• [Elecraft] K3- NO Output Power   Jim Hester
  • [Elecraft] K3- NO Output Power   Ned
• [Elecraft] K3: Using 40m Loop for 10m   john petters
• [Elecraft] K3 Macros (help setting narrow filters on SSB)   Tony Fegan VE3QF
  • [Elecraft] K3 Macros (help setting narrow filters on SSB)   Barry N1EU
    • [Elecraft] K3 Macros (help setting narrow filters on SSB)   Tony Fegan VE3QF
• [Elecraft] TO ALL!   JIM DAVIS
  • [Elecraft] TO ALL!   Ken Kopp
    • [Elecraft] TO ALL! (K0PP)   JIM DAVIS
  • [Elecraft] TO ALL!   Bruce McLaughlin
• [Elecraft] second RX stopped   Dick Grolleman
  • [Elecraft] second RX stopped fixed   Dick Grolleman
• [Elecraft] K1 Intermittent power up problem   Bob VanFossen
  • [Elecraft] K1 Intermittent power up problem   Don Wilhelm
  • [Elecraft] K1 Intermittent power up problem   Don Wilhelm
• [Elecraft] K3 Versatility   Dave Yarnes
• [Elecraft] Preliminary Elecraft CW Net Report for December 28th & 29th, 2008   Kevin Rock
  • [Elecraft] Preliminary Elecraft CW Net Report for December 28th & 29th, 2008   Bruce McLaughlin
• [Elecraft] WTB - KAF2   Johnny Siu
• [Elecraft] KRX3 Mounting Problem   Kenneth Lopez
  • [Elecraft] KRX3 Mounting Problem   Johnny Siu
  • [Elecraft] KRX3 Mounting Problem   Don Wilhelm
    • [Elecraft] KRX3 Mounting Problem   W7TMT
• [Elecraft] K3 Panadaptor/Bandscope   Trevor Smithers
  • [Elecraft] K3 Panadaptor/Bandscope   dj7mgq at muenchen-mail.de
    • [Elecraft] Re: K3 Panadaptor/Bandscope   wayne burdick
      • [Elecraft] Re: K3 Panadaptor/Bandscope   Ralph Tyrrell
      • [Elecraft] Re: K3 Panadaptor/Bandscope   wayne burdick
      • [Elecraft] Re: K3 Panadaptor/Bandscope   David Ferrington, M0XDF
      • [Elecraft] Re: K3 Panadaptor/Bandscope   Joe Planisky
      • [Elecraft] Re: K3 Panadaptor/Bandscope   O. Johns
      • [Elecraft] Re: K3 Panadaptor/Bandscope   K8TB
• [Elecraft] K3: Antenna Ports   Ron Spencer
  • [Elecraft] K3: Antenna Ports   Bill W4ZV
  • [Elecraft] K3: Antenna Ports   Don Wilhelm
  • [Elecraft] K3: Antenna Ports   Brian Alsop
• [Elecraft] K3: Using 40m Loop for 10m   Mike Scott
• [Elecraft] K3: KAS3 (was Antenna Ports)   DOUGLAS ZWIEBEL
  • [Elecraft] K3: KAS3 (was Antenna Ports)   Don Wilhelm
    • [Elecraft] K3: KAS3 (was Antenna Ports)   ab2tc
• [Elecraft] Sub Receiver Filter Macros   Tony Fegan VE3QF
• [Elecraft] KRX3 Mounting Problem-Solved!   Kenneth Lopez
• [Elecraft] Re: K1 Intermittent power up problem   Bob VanFossen
• [Elecraft] Sell: LP-Pan and E-mu 0202 sound card   Greg-N4CC
• [Elecraft] Re: Automatic diversity configuration   Benny Aumala
• [Elecraft] Re: K3 Configuration   Gregory Fischer
• [Elecraft] Re: K3 Panadaptor/Bandscope   Dave G4AON
• [Elecraft] K3 Panadapter   Ken Kopp
• [Elecraft] K3 Panadaptor wishes   Ralph Parker
• [Elecraft] RS 232 cable?   W5CEM
  • [Elecraft] RS 232 cable?   Don Wilhelm
• [Elecraft] FS LP-PAN and E-MU 0202 as new   n6ax at speakeasy.net
  • [Elecraft] FS LP-PAN and E-MU 0202 as new   John Klewer
    • [Elecraft] FS LP-PAN and E-MU 0202 as new   John Klewer
      • [Elecraft] FS LP-PAN and E-MU 0202 as new   VK5ABQ
      • [Elecraft] FS LP-PAN and E-MU 0202 as new   John Klewer
• [Elecraft] K3 DVR   Barry Simpson
• [Elecraft] ?high ALC reading using voice recorder playback   Robert Sands
• [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Lee Buller
  • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Dick Dievendorff
  • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Dale Putnam
  • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Ron D'Eau Claire
    • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Jim Miller
  • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   John R. Lonigro
  • [Elecraft] OT Slightly: PC Board Recovery -Plated Through Holes   Joe W2KJ
• [Elecraft] OT: Removing Solder Through Plated Through Holes   Lee Buller
  • [Elecraft] OT: Removing Solder Through Plated Through Holes   Don Wilhelm
    • [Elecraft] OT: Removing Solder Through Plated Through Holes   Bill NY9H
  • [Elecraft] OT: Removing Solder Through Plated Through Holes   David Ferrington, M0XDF
• [Elecraft] K3 Panafapter   Gary Gregory
• [Elecraft] [ K2 KX1 K1 ] Advice sought on Elecraft radios   Daniel Paul Perez
  • [Elecraft] [ K2 KX1 K1 ] Advice sought on Elecraft radios   Ron D'Eau Claire
• [Elecraft] K3 question: setting monitor level via serial port command?   Dana Roode
  • [Elecraft] RE: K3 question: setting monitor level via serial portcommand?   list1
• [Elecraft] Woke Up With A Headache--No K3 ATU   Dave Yarnes
  • [Elecraft] Woke Up With A Headache--No K3 ATU   Bruce McLaughlin
    • [Elecraft] Woke Up With A Headache--No K3 ATU   Mike Harris
      • [Elecraft] Woke Up With A Headache--No K3 ATU   Bruce McLaughlin
      • [Elecraft] Woke Up With A Headache--No K3 ATU   Adam Koczarski
    • [Elecraft] Woke Up With A Headache--No K3 ATU   O. Johns
      • [Elecraft] Woke Up With A Headache--No K3 ATU   Bruce McLaughlin
• [Elecraft] OT-USB Serial Adapter   Dave Yarnes
  • [Elecraft] OT-USB Serial Adapter   Lennart
    • [Elecraft] OT-USB Serial Adapter   Grant Youngman
      • [Elecraft] OT-USB Serial Adapter   Dave Yarnes
    • [Elecraft] OT-USB Serial Adapter   Ron D'Eau Claire
    • [Elecraft] OT-USB Serial Adapter   André Santos
  • [Elecraft] OT-USB Serial Adapter   Johnny Siu
  • [Elecraft] OT-USB Serial Adapter   Matt Zilmer
  • [Elecraft] OT-USB Serial Adapter   O. Johns
• [Elecraft] K3 as a SW receiver   T W
  • [Elecraft] K3 as a SW receiver   André Santos
• [Elecraft] K3 #2450   f9oj.7
  • [Elecraft] [OT] Who knows anything about the 4635 tube   dj7mgq at muenchen-mail.de
• [Elecraft] Re: K3 Panadaptor/Bandscope   Thomas Bingenheimer
• [Elecraft] K3 drift   Steven.Zabarnick at notes.udayton.edu
  • [Elecraft] K3 drift   Bruce McLaughlin
  • [Elecraft] K3 drift   John A. McCabe
    • [Elecraft] K3 drift   JIM DAVIS
      • [Elecraft] K3 drift   Erik N Basilier
      • [Elecraft] K3 drift   Julian, G4ILO
      • [Elecraft] K3 drift   John A. McCabe
      • [Elecraft] K3 drift   JIM DAVIS
      • [Elecraft] K3 drift   Ron D'Eau Claire
      • [Elecraft] K3 drift   Ron D'Eau Claire
      • [Elecraft] Re: K3 drift   wayne burdick
    • [Elecraft] K3 drift   Monty Shultes
• [Elecraft] OT: Removing Solder Through Plated Through Holes   Arnie Grubbs
• [Elecraft] N2CQ QRP Contest Calendar: Jan 2009   Ken Newman
• [Elecraft] OT: Recommendation for QRP PSU   Julian, G4ILO
• [Elecraft] OT: Recommendation for QRP PSU   Julian, G4ILO
• [Elecraft] [ K2 KX1 K1 ] Advice sought on Elecraft radios   Ron D'Eau Claire
• [Elecraft] Rear Line Input   hb9ari
  • [Elecraft] Rear Line Input   Luc Favre
• [Elecraft] OT: 3L rotating 160m yagi   DOUGLAS ZWIEBEL
  • [Elecraft] OT: 3L rotating 160m yagi   Tom
    • [Elecraft] OT: 3L rotating 160m yagi   Vic K2VCO
      • [Elecraft] OT: 3L rotating 160m yagi   Bruce McLaughlin
  • [Elecraft] OT: 3L rotating 160m yagi   Jeff Wandling W7BRS
  • [Elecraft] OT: 3L rotating 160m yagi   Lee Buller
    • [Elecraft] OT: 3L rotating 160m yagi   Paul Christensen
      • [Elecraft] OT: 3L rotating 160m yagi   Jon Kåre Hellan
      • [Elecraft] OT: 3L rotating 160m yagi   Vic K2VCO
  • [Elecraft] OT: 3L rotating 160m yagi   Bill W4ZV
    • [Elecraft] OT: 3L rotating 160m yagi   Fred Jensen
• [Elecraft] Re: OT Slightly: PC Board Recovery -Plated Through Holes   Rick Shindley
• [Elecraft] FW: Your Buy.com order is on its way   Phil LaMarche
• [Elecraft] Any thoughts about rig LONGEVITY???   JIM DAVIS
  • [Elecraft] Any thoughts about rig LONGEVITY???   Stephen W. Kercel
  • [Elecraft] Any thoughts about rig LONGEVITY???   Don Wilhelm
    • [Elecraft] Any thoughts about rig LONGEVITY???   David Woolley (E.L)
  • [Elecraft] Any thoughts about rig LONGEVITY???   WILLIS COOKE
• [Elecraft] Receive antenna connection   Joe Hoffman
  • [Elecraft] Receive antenna connection   Dick Dievendorff
  • [Elecraft] Receive antenna connection   WILLIS COOKE
• [Elecraft] Re: [ K2 KX1 K1 ] Advice sought on Elecraft radios   Mike Morrow
• [Elecraft] RE: Receive antenna connection   K2MK
  • [Elecraft] RE: Receive antenna connection   Joe Hoffman
• [Elecraft] K3 as a SW receiver   Gordon & Lois Duff
• [Elecraft] KRX-s antenna connector   Ken Kopp
• [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   jimimaxi2 at comcast.net
  • [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   David Ferrington, M0XDF
  • [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   Don Wilhelm
    • [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   Mel Farrer
      • [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   Don Wilhelm
      • [Elecraft] Re: OT: Removing Solder Through Plated Through Holes   Mike S
• [Elecraft] KRX3 Install Comments   Kenneth Lopez
• [Elecraft] Longevity...push buttons   DOUGLAS ZWIEBEL
• [Elecraft] USB Adapter for Mac users   Randy Cook
• [Elecraft] looking for KAF2 and KIO2   Johnny Siu
• [Elecraft] K2 PLL reference oscillator range is zero   David Johnson
  • [Elecraft] K2 PLL reference oscillator range is zero   Don Wilhelm
    • [Elecraft] K2 PLL reference oscillator range is zero   David Johnson
• [Elecraft] K2 Head Phone Jack   Glenn Haffly
  • [Elecraft] K2 Head Phone Jack   Don Wilhelm
• [Elecraft] K3 and constant tone!   JIM DAVIS
  • [Elecraft] K3 and constant tone!   Roger Marrotte
    • [Elecraft] K3 and constant tone!   Robert Naumann
  • [Elecraft] K3 and constant tone!   Bob Tellefsen
    • [Elecraft] K3 and constant tone!   Gregory Fischer
    • [Elecraft] K3 and constant tone!   JIM DAVIS
• [Elecraft] K3 and constant tone!   DOUGLAS ZWIEBEL
• [Elecraft] K3 as a SW receiver   KM5Q
  • [Elecraft] Re: K3 as a SW receiver   wayne burdick
    • [Elecraft] Re: K3 as a SW receiver   Mike Harris
    • [Elecraft] Re: K3 as a SW receiver   Joe Subich, W4TV
      • [Elecraft] K3 as a SW receiver   ab2tc
      • [Elecraft] K3 as a SW receiver   ab2tc
      • [Elecraft] K3 as a SW receiver   ab2tc
      • [Elecraft] K3 as a SW receiver   ab2tc
  • [Elecraft] K3 as a SW receiver   Barbara Maloney
    • [Elecraft] K3 as a SW receiver   Grant Youngman
• [Elecraft] K3 interface to Kam Plus on HF   Gary Gregory
• [Elecraft] KDVR3, PR6 & K3AFMDKT arrived   David Ferrington, M0XDF
• [Elecraft] New Year   TA2AH
• [Elecraft] Re: K3 drift   Steven.Zabarnick at notes.udayton.edu
• [Elecraft] Happy New Year, Elecraft   Benny Aumala
  • [Elecraft] Happy New Year, Elecraft   Johnny Siu
• [Elecraft] OT:RFI   John
  • [Elecraft] OT:RFI   S Sacco
• [Elecraft] Only Slightly OT....The times, they're a changing, and frequency also..   K8TB
  • [Elecraft] Only Slightly OT....The times, they're a changing, and frequency also..   rrkrr
• [Elecraft] K3 as a SW receiver   KM5Q
  • [Elecraft] K3 as a SW receiver   Bill W5WVO
• [Elecraft] Auto TX Gain calibration error   Cady, Fred
  • [Elecraft] Auto TX Gain calibration error   BigAlT
    • [Elecraft] Auto TX Gain calibration error   Cady, Fred
      • [Elecraft] Auto TX Gain calibration error   Dick Dievendorff
      • [Elecraft] Auto TX Gain calibration error   Cady, Fred
  • [Elecraft] Auto TX Gain calibration error   Dick Dievendorff
• [Elecraft] K2 KX1 K1 More advice sought on Elecraft radios   Daniel Paul Perez
  • [Elecraft] K2 KX1 K1 More advice sought on Elecraft radios   Peter Wollan
    • [Elecraft] K2 KX1 K1 More advice sought on Elecraft radios   Daniel Paul Perez
  • [Elecraft] K2 KX1 K1 More advice sought on Elecraft radios   Ron D'Eau Claire
• [Elecraft] RE: K3 and constant tone!   Joel R. Hallas
• [Elecraft] Obscure RTTY bug?   Iain MacDonnell - N6ML
  • [Elecraft] Obscure RTTY bug?   dalspaugh at comcast.net
    • [Elecraft] Obscure RTTY bug?   Kok Chen
      • [Elecraft] Obscure RTTY bug?   Kok Chen
• [Elecraft] LP-PAN for sale   Lance Collister, W7GJ
• [Elecraft] Happy New Year   Toby Deinhardt
• [Elecraft] FS: Elecraft K2 Parts   Dave White
• [Elecraft] k2-100   ron
• [Elecraft] k2-100   ron
• [Elecraft] KX1, Removing Underside of Board   MASH
• [Elecraft] K2 Nifty Manual & K3 Navigator Cable   Dave Agsten