[Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW

[Dave G4AON]

Dick, nice utility. I've noticed an error can occur if the K3 is set to
lowish power when you start the calibration run. I had power set to 5.6
Watts and the 5 Watt cal routine failed. Setting the power to 35 Watts
allowed it all to run correctly. Apologies if this has already been noted.

73 and all the best for 2009
Dave, G4AON
K3 #80 f/w 2.76