[Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50 W, and 1 mW

[Dick Dievendorff]

This is interesting, I'll fool with this.  I don't know why the
pre-calibration power setting would affect the automatic calibration,
because the power is set by the calibration routine to 5 or 50 watts or 1
milliwatt (on each band) before any transmission.  

73 de Dick, K6KR


-----Original Message-----
From: Dave G4AON [mailto:elecraft at astromag.co.uk] 
Sent: Saturday, December 27, 2008 2:26 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3: Automated Transmit Gain Calibration at 5 W, 50
W, and 1 mW

Dick, nice utility. I've noticed an error can occur if the K3 is set to
lowish power when you start the calibration run. I had power set to 5.6
Watts and the 5 Watt cal routine failed. Setting the power to 35 Watts
allowed it all to run correctly. Apologies if this has already been noted.

73 and all the best for 2009
Dave, G4AON
K3 #80 f/w 2.76