[Elecraft] K3 and MixW PSK31

[W2XB]

Hello Gary,

I had problems wetting up at first also.
Here are my settings,
In mixw I have the cat set to Kenwood...model to elecraft k2......
my com port is set to #1 and baud rate is "38400" same as rig.
Have ptt "via cat command" checked
afsk in place of fsk checked.
In the sound card "device is computer soundcard."
Then in input I have "mic" (soundcard name)
"output speakers" (soundcard name)
I have the sample rate at 1200 becuase I am using winkey...usually its at
11025.. If I remember right.
also have "full duplex" checked.
 On the rig I have data mode "afsk a "
"rts-dtr" is set in the menu. and "mic sel" is Line in...
Hope this helps..


Don...w2xb



Gary Gregory-3 wrote:
> 
> Thanks for the replies and settings etc. All to no avail sadly. The K3
> will
> work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31.
> 
> This was a factory built unit and if I was located near Aptos it would be
> on
> it's way back to be checked out fully, sadly I live a little ways beyond
> California.
> 
> Oh well, who wants to play with a computer when you can find a human to
> converse with...so no more data stuff for me, life is way too short to
> waste
> time playing with 4 data programs that simply don't work with this
> particular K3.
> 
> Regards,
> Gary
> I just got lost in thought............. It was unfamiliar territory
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

-- 
View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1639248.html
Sent from the Elecraft mailing list archive at Nabble.com.