[Elecraft] K3 Band Data

[Joe Subich, W4TV]

The BCD encoding is the same as the FT-1000D/FT-2000. 

Interfacing to a microHAM or TopTen Band Decoder requires 
no internal modification (both products include pull-up 
resistors on their BCD inputs).  The Elecraft KRC-2 and 
W9XT Band Decoders do not have pull-up resistors and will 
require the addition of 2.2 - 10K resistors in the decoder 
or on the KIO3 board as documented in the Negative ALC 
Mod bulletin. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jan Erik Holm
> Sent: Friday, December 05, 2008 4:00 AM
> To: Elecraft Reflector
> Subject: [Elecraft] K3 Band Data
> 
> 
> Is the K3 band data compatible with Yaesu (ex:FT1000D)
> BCD band data. Looks to me that it is, or?
> 
> 73 Jim SM2EKM
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com