[Elecraft] K3 - 2.73/1.98 Clicks on Power On

[Ken K3IU]

I notice the same thing, but only when there is a signal on the 
frequency tuned in on the K3 when power is turned ON. AF gain set at 
about 9 o'clock, CONFIG:AF GAIN HI. With no signal on the tuned 
frequency, the loud audio does not happen. I did not notice this on 
previous firmware versions. Later this morning I'll reinstall previous 
firmware and double check.
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Stewart Baker wrote:
> Hi,
> Since installing MCU 2.73. I have noticed that power on is 
> accompanied by a number of loud, rather unpleasant clicks/clunks 
> from the speaker.
>
> 73
> Stewart G3RXQ
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081212/75d096c0/attachment.htm