[Elecraft] KDVR3

[Mike Harris]

G'day Lyle,

Many thanks for that.  I've just discovered via the KDVR3 errata rev A 
that "the full set of KDVR3 features" is bundled with beta code v2.71.  So 
far I've only been able to locate v2.67 in the beta folder.  Not normally 
a problem accessing the latest beta so I guess it isn't currently on the 
site.

Regards,

Mike VP8NO

----- Original Message ----- 
From: "lyle johnson" <kk7p at wavecable.com>
To: "Mike Harris" <mike.harris at horizon.co.fk>; "Reflector Elecraft" 
<Elecraft at mailman.qth.net>
Sent: Sunday, December 07, 2008 5:49 PM
Subject: Re: [Elecraft] KDVR3


|> 1.    How many seconds of recording.
|
| TX MEMORIES
|
| Each transmit memory is up to 15 seconds in length.
|
| There are eight (8) memories, arranged as two (2) banks of four (4), 
just like
| the CW and Data memories.
|
| RX MEMORY
|
| There is a 90 second "endless loop".  New recordings are appended to the 
nests
| audio in the loop, and the oldest is earased as more audio is added.
|
| > 2.    It is stated that "recording starts at the beginning of 
available
| > space each time it is started, and will stop at the end if not 
terminated
| > sooner".  This would imply that memory is not divided equally between
| > M1-M4 but is dynamically available, depending upon the length of the 
prior
| > recordings.
| > 3.    How is memory erased.
|
| In the case of the TX memories, record something new.  It might be 
extremely
| short (44 milliseconds).
|
| In the case of the Rx loop, you don't erase it, you just record over old
| audio.
|
| > 4.    I assume that if recorded received audio on playback is heard on 
the
| > K3 speaker/phones it can also be sent to line out to enable archive on 
a
| > PC.
|
| I make the same assumption :-)
|
| The DVR Rx palyback audio substitutes for the main receiver audio just 
prior
| to the AF GAIN control so you can adjust its level on playback.  It is 
also
| routed to LINE OUT.
|
| 73,
|
| Lyle KK7P