[Elecraft] KDVR3

[lyle johnson]

> 1.    How many seconds of recording.

TX MEMORIES

Each transmit memory is up to 15 seconds in length.

There are eight (8) memories, arranged as two (2) banks of four (4), just like 
the CW and Data memories.

RX MEMORY

There is a 90 second "endless loop".  New recordings are appended to the nests 
audio in the loop, and the oldest is earased as more audio is added.

> 2.    It is stated that "recording starts at the beginning of available 
> space each time it is started, and will stop at the end if not terminated 
> sooner".  This would imply that memory is not divided equally between 
> M1-M4 but is dynamically available, depending upon the length of the prior 
> recordings.
> 3.    How is memory erased.

In the case of the TX memories, record something new.  It might be extremely 
short (44 milliseconds).

In the case of the Rx loop, you don't erase it, you just record over old 
audio.

> 4.    I assume that if recorded received audio on playback is heard on the 
> K3 speaker/phones it can also be sent to line out to enable archive on a 
> PC.

I make the same assumption :-)

The DVR Rx palyback audio substitutes for the main receiver audio just prior 
to the AF GAIN control so you can adjust its level on playback.  It is also 
routed to LINE OUT.

73,

Lyle KK7P