[Elecraft] K3 Macros (help setting narrow filters on SSB)

[Tony Fegan VE3QF]

Thanks Barry,

	Yes it works fine. I had it working before and then it stopped working 
correctly. I thought I had tried all combinations! Now I can set macros 
for some preset "Contour filters" using the sub-receiver. I haven't had 
much time to play recently.
	I hope to learn more about "K2" and "K3" modes.

73
Tony VE3QF

Barry N1EU wrote:
> 
> Tony Fegan VE3QF wrote:
>> I am having trouble understanding the "K2" and "K3" mode commands and 
>> when they are appropriate. If I want to set a bandwidth of 1.6 kHz and I 
>> have a 1.8 kHz roofing filter in position 4, how do I set it with a 
>> center frequency of 1.2 kHz? I usually end up with the roofing filter 
>> bandwidth and the default (no good for SSB) center frequency.
>>
> 
> I'm not sure if this will help Tony:  K31;FW0160;IS 1200; will get you
> 1.6Khz and 1.2Khz center frequency.  I would think that the 1.8Khz roofing
> filter should automatically be selected when you set the width to 1.6Khz, as
> my K3 does.
> 
> 73,
> Barry N1EU
>