[Elecraft] Auto TX Gain calibration error

[Dick Dievendorff]

That is strange.  I thought I switched to the antenna you've selected in the
wizard for every band and restore it to what it was before. 

I've been doing most of my testing with the Dummy Load on AN2 and the "real"
antennas on ANT1.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Cady, Fred
Sent: Wednesday, December 31, 2008 2:52 PM
To: BigAlT; elecraft at mailman.qth.net
Subject: RE: [Elecraft] Auto TX Gain calibration error

Thanks Al, that did it.
I did discover maybe another little glitch. I have an 18 MHz antenna on
ANT2 and the AUTO config seemed to use that instead of the dummy on
ANT1.
Great utility, thanks.
Fred


Fred Cady
fcady at ieee dot org  

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of BigAlT
> Sent: Wednesday, December 31, 2008 12:13 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Auto TX Gain calibration error
> 
> 
> Do you have Config:Tech MD turned ON ?. It's necessary for it 
> to be on ( a
> small bug in this version of the utility which will be fixed 
> in the next
> release )
>  73
>  Al
>  WB6HPF
> 
> Cady, Fred wrote:
> > 
> > Hi all,
> > Have installed (and re-installed) firmware version 2.76 and 
> the new K3
> > utility to do the auto tx gain. I get the following error:
> > 'Unexpected response "DS at NQR@008**;" to "DS;". State 41'
> > 
> > Must have something wrong in my config or something.
> > Anybody else seeing this or have any suggestions?
> > Thanks.
> > Fred
> > KE7X
> > 
> > Fred Cady
> > fcady at ieee dot org 
> > This email and any files transmitted with it are 
> confidential and intended
> > solely for the use of the individual or entity to whom they 
> are addressed.
> > If you have received this email in error please notify the 
> system manager.
> > This message contains confidential information and is 
> intended only for
> > the individual named. If you are not the named addressee 
> you should not
> > disseminate, distribute or copy this e-mail.
> > 
> >  
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft    
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> > 
> 
> -- 
> View this message in context: 
> http://n2.nabble.com/Auto-TX-Gain-calibration-error-tp2096956p
> 2096978.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com