[Elecraft] K3 AND QUADRA

[Joe Subich, W4TV]

> wire up the cable to interconnect everything, and enjoy.

Quadra    Quadra                   K3         K3 
  ALC    Band Data                ACC        +12
  RCA     DIN8/262               DE15HD      RCA
             1         13V                   Tip
             2         PTT          10
             3         GND           5      shell
             4          A           13
             5          B            3
             6          C            9
             7          D           14 
             8      Tx Inhibit       7
           shell      Shield       shell 
  Tip                  ALC          15  
 shell                 GND          12       

Note: Nonstandard numbering of DIN8/262 plug. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jerry Flanders
> Sent: Saturday, December 13, 2008 7:59 PM
> To: K9ZTV
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 AND QUADRA
> 
> 
> Quadra plus K3 works FB. Do the ALC mod, install the pull-up 
> resistors for the automatic BCD bandswitching, wire up the cable to 
> interconnect everything, and enjoy.
> 
> Jerry W4UK
> 
> At 03:18 PM 12/13/2008, K9ZTV wrote:
> >Would appreciate those driving a Quadra with their K3 contacting me
> >off-reflector.
> >
> >73,
> >
> >Kent   K9ZTV
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com