[Elecraft] Line Out Clicks

[jkelly]

I only have the main receiver. OK thanks.
Any way to assign the main receiver to both line outputs?

Jeff

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: "jkelly" <jkelly at bellatlantic.net>
Cc: <elecraft at mailman.qth.net>
Sent: Monday, December 08, 2008 8:11 AM
Subject: Re: [Elecraft] Line Out Clicks


> Jeff,
>
> Do you have the sub-receiver installed?  If not, the right channel will 
> not have any content.
> If you are driving external speakers, use the SPEAKER output jack.
>
> 73,
> Don W3FPR
>
> jkelly wrote:
>> Hello,
>>  I just received my K3 and when I connect it to the PC via the rear line 
>> out jack,
>> I have receive audio on one channel and clicks on the other channel. I 
>> tried fiddling with the connections and can't get receive audio on both 
>> channels. http://mysite.verizon.net/jkelly/ham/clicks.jpg
>>  I am using a 1/8" stereo patch cord.
>>  Any ideas?
>>  Thanks,
>>  Jeff
>> KT2K
>>  ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 
>> 270.9.15/1837 - Release Date: 12/8/2008 9:38 AM
>>
>>