[Elecraft] 50 and 100 DSP positions

[W8ZN at comcast.net]

Thanks John,

That was it. Both rigs use the same config file so it makes sense that they both acted the same way. I guess the equalization happens before the bandwidth instead of after. So now the question is, should the DSP be smart enough to know when it's equalization has be changed and you ask it to go to 100 or 50Hz, should it display some kind of warning message like, "Hey stupid, I can't do that" or maybe "RTFM"

Thanks again for the info.

Terry

 -------------- Original message ----------------------
From: "John King" <wa1abi at cox.net>
> Hello Terry,
> 
> Are you using receive EQ? This threw me as well.
> Set the EQ to flat and try it. I believe someone
> said you can get around this by using only 'cut'
> instead of 'boost' in your EQ curve.
> 
> 73,
>   john WA1ABI
> 
> 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net
> > [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of W8ZN at comcast.net
> > Sent: Tuesday, December 23, 2008 12:25 PM
> > To: Elecraft at mailman.qth.net
> > Subject: [Elecraft] 50 and 100 DSP positions
> > 
> > 
> > Hi all,
> > 
> > On K3's #94 and #965, on cw when you narrow the DSP down past 150 
> > to 100, there is a noticable pop in the speaker and the audio 
> > becomes quite muted. The S meter still shows the same strength. 
> > Both are running 2.73. I've tried moving the IF shift but still 
> > muted audio. You can hear it, but just way down.
> > 
> > Can anyone verify if their's acts the same way?
> > 
> > thanks!!
> > 
> > Terry
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft    
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> >