[Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?

[Howard K2HK]

Thanks for the reply Dick. That's the first thing I checked and I wish that was the problem with it's easy fix.  I might also thank you now for the very useful program which I use more often than I anticipated. Luckily this the 160 CW contest weekend. Nothing lost yet but if I don't come up with an answer soon it looks like I will lose lots of time when I return to Aptos.
73,
Howard..K2HK 
HK

From: dieven at comcast.netTo: k2hk at arrl.net; elecraft at mailman.qth.netSubject: RE: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?Date: Sun, 7 Dec 2008 08:03:32 -0800



Have you enabled the 2.7 kHz filter for all modes in receive using the CONFIG FLx menu or the K3 Utility’s Crystal Filter Configuration page?
 
Dick, K6KR
 
 


From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Howard K2HKSent: Sunday, December 07, 2008 7:33 AMTo: elecraft at mailman.qth.netSubject: [Elecraft] Update and another request Lost SSB after KRX3 install..Ideas?
 
After sending the msg below I removed the KRX3 and also reinstalled the 2.7 filter whose position had been moved on the RF board. Neither of these made any difference. KRX3 works as expected, CW works as usual but......no audio output on SSB. Howard..K2HK
HK
No TX audioDate: Sat, 6 Dec 2008 18:12:28 +0000I recently installed the KRX3 in my K3. At the same time I moved some filters and installed an additional one on the main board . I now have the problem of no audio on SSB. Works FB on CW. I am thinking the culprit is likely to be the 2.7KC filter on the main board. Before opening up things again I thought I would ask for some suggestions.Howard..K2HK HK
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081207/bae828d8/attachment.htm