[Elecraft] K3 Band Data

[Greg - AB7R]

The Elecraft KRC-2 and 
>W9XT Band Decoders do not have pull-up resistors and will 
>require the addition of 2.2 - 10K resistors 

Not true of the KRC2 IF you are using the AuxBus line.  I have the K3 ACCY AuxBus connected to the KRC2 and it 
works great.  No changes needed.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Fri Dec  5  7:37 , "Joe Subich, W4TV"  sent:

>
>The BCD encoding is the same as the FT-1000D/FT-2000. 
>
>Interfacing to a microHAM or TopTen Band Decoder requires 
>no internal modification (both products include pull-up 
>resistors on their BCD inputs).  The Elecraft KRC-2 and 
>W9XT Band Decoders do not have pull-up resistors and will 
>require the addition of 2.2 - 10K resistors in the decoder 
>or on the KIO3 board as documented in the Negative ALC 
>Mod bulletin. 
>
>73, 
>
>   ... Joe, W4TV 
> 
>
>
>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net 
>> [elecraft-bounces at mailman.qth.net','','','')">elecraft-bounces at mailman.qth.net] On Behalf Of Jan Erik Holm
>> Sent: Friday, December 05, 2008 4:00 AM
>> To: Elecraft Reflector
>> Subject: [Elecraft] K3 Band Data
>> 
>> 
>> Is the K3 band data compatible with Yaesu (ex:FT1000D)
>> BCD band data. Looks to me that it is, or?
>> 
>> 73 Jim SM2EKM
>> 
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft    
>> 
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com