[Elecraft] K3 Memory Recall - Acting Like Band Select

[Don Wilhelm]

Jim,

With MEM 0-9 set either to BAND SEL or NOR, the 0-9 buttons are *still* 
quick memories.  You cannot enter two digits from the keypad - you must 
use the VFO A knob to select memories with numerical value addresses 
greater than 9.

73,
Don W3FPR

Jim - W6VAR wrote:
> Thanks, Barry. This should be true if CONFIG: MEM 0-9 is set to BAND SEL, but
> I have it set to NOR. In which case, 0-9 should NOT be in the band select
> mode and ALL memories should be accessable with M>V ## M>V...unless of
> course I missed something in the updates :)
>
> Jim
>
>
>
>
> Barry Simpson wrote:
>   
>> Hi Jim
>>
>> Memories 0-9 are quick memories which are accessed by the commands M-V and
>> then the keypad number. I have programmed each of those memories with each
>> band 160 thru 6 metres so that I can change bands without having to use
>>     
>