March 2005 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Mar 1 06:23:43 EST 2005
Ending: Thu Mar 31 23:44:47 EST 2005
Messages: 535

• [TheForge] cutting propane cylinders   Doug Ayen
• [TheForge] Welding advice -- Now Heavy Welds   James Binnion
• [TheForge] Welding advice -- Now Heavy Welds   James Binnion
• [TheForge] Argentium Silver   James Binnion
• [TheForge] argentium silver   James Binnion
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   James Binnion
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   James Binnion
• [TheForge] NJMT (was: rivets: chapter two)   Blacksmith
• [TheForge] Japanese Sen experimentation   Blacksmith
• [TheForge] AMF means Adios M ..   Dave Brown
• [TheForge] Black finish for galvanized   Larry Brown
• [TheForge] Welding Liberty Ships   Larry Brown
• [TheForge] rivets: chapter two   Larry Brown
• [TheForge] preserving heat colors   Larry Brown
• [TheForge] leather   Larry Brown
• [TheForge] leather   Larry Brown
• [TheForge] leather   Larry Brown
• [TheForge] RE: AMF   Larry and Pat Brown
• [TheForge] leather   Larry and Pat Brown
• [TheForge] leather   Larry and Pat Brown
• [TheForge] Metal porosity and purging tanks (was: cutting propane cylinders- fuel-air mixture)   Larry and Pat Brown
• [TheForge] Welding Liberty Ships   JOHN CHOBRDA
• [TheForge] CR 1018 .25 x 1.5   JOHN CHOBRDA
• [TheForge] seeking Bob Tuftee? and flint source?   JOHN CHOBRDA
• [TheForge] seeking Bob Tuftee? and flint source?   JOHN CHOBRDA
• [TheForge] cutting propane cylinders   JOHN CHOBRDA
• [TheForge] Welding advice   Ron Childers
• [TheForge] Hevy Welds on a big shaft   Ron Childers
• [TheForge] Welding Liberty Ships   Ron Childers
• [TheForge] Liberty Ships & wrought anchor chain   Ron Childers
• [TheForge] Dump plunder   Ron Childers
• [TheForge] wrought iron   Ron Childers
• [TheForge] wrought iron *refined*   Ron Childers
• [TheForge] Off Topic lead vessel   Ron Childers
• [TheForge] Another lesson   Ron Childers
• [TheForge] Another lesson   Ron Childers
• [TheForge] Japanese Sen shapes   Ron Childers
• [TheForge] Looking for the cast type hammer drifts...   Ron Childers
• [TheForge] Looking for the cast type hammer drifts...   Ron Childers
• [TheForge] Looking for the cast type hammer drifts...   Ron Childers
• [TheForge] long distance freight   Ron Childers
• [TheForge] leather   Ron Childers
• [TheForge] cutting propane cylinders, soap drums, gas tanks, etc   Ron Childers
• [TheForge] cutting propane cylinders- fuel-air mixture   Ron Childers
• [TheForge] local source of ITC 100   Ron Childers
• [TheForge] cutting propane cylinders- fuel-air mixture   Ron Childers
• [TheForge] local source of ITC 100   Ron Childers
• [TheForge] report on one small compressed air portable tankexperience   Ron Childers
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   April & Bill Clemens
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   April & Bill Clemens
• [TheForge] preserving heat colors   Clyde
• [TheForge] cutting propane cylinders   Clyde
• [TheForge] Caniron V   Bob Cook
• [TheForge] Forge and Anvil in Ont.   Bob Cook
• [TheForge] Off Topic lead vessel   Barking Crow
• [TheForge] Another lesson   Barking Crow
• [TheForge] Japanese Sen experimentation   Barking Crow
• [TheForge] cutting propane cylinders   Barking Crow
• [TheForge] Sorber collection   Barking Crow
• [TheForge] report on one small compressed air portable tank experience   Barking Crow
• [TheForge] A-frame cooking iron   Daniel Crowther
• [TheForge] A-Frame Cooking Iron   Daniel Crowther
• [TheForge] Help a sinking ship?   Kevin D
• [TheForge] Looking for the cast type hammer drifts...   Kevin D
• [TheForge] air hammer   Kevin D
• [TheForge] Sorber collection   Kevin D
• [TheForge] A-frame cooking iron   Darrell
• [TheForge] 301 buffallo   Darrell
• [TheForge] Auctions   Darrell
• [TheForge] Sorber collection   Darrell
• [TheForge] Auctions   Darrell
• [TheForge] cutting propane cylinders- fuel-air mixture   Darrell
• [TheForge] Sorber collection   Roger R Degner
• [TheForge] Welding advice -- Now Heavy Welds   Kevin Donahoe
• [TheForge] Welding Liberty Ships   Kevin Donahoe
• [TheForge] Dump plunder OT   Kevin Donahoe
• [TheForge] Welding Liberty Ships OT   Kevin Donahoe
• [TheForge] Liberty Ships & wrought anchor chain   Kevin Donahoe
• [TheForge] Black finish for galvanized   Kevin Donahoe
• [TheForge] wrought iron OT   Kevin Donahoe
• [TheForge] wrought iron OT   Kevin Donahoe
• [TheForge] Neat Folding Fariers tool on Ebay   Kevin Donahoe
• [TheForge] Welding advice   Ralph Douglass
• [TheForge] Wrist problem   Ralph Douglass
• [TheForge]Help a sinking ship?   Ralph Douglass
• [TheForge] air hammer   Ralph Douglass
• [TheForge] Auctions   Ralph Douglass
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Albin Drzewianowski
• [TheForge] RE: Smithing Question - Hold down   Bob Ehrenberger
• [TheForge] A-Frame Cooking Iron (coherency and reading   Bob Ehrenberger
• [TheForge] RE: AMF   Bob Ehrenberger
• [TheForge] CR 1018 .25 x 1.5   Bob Ehrenberger
• [TheForge] Air compressor question   Bob Ehrenberger
• [TheForge] RE: Air compressor question   Bob Ehrenberger
• [TheForge] Re: long distance freight   Bob Ehrenberger
• [TheForge] RE: Smithing Question - Hold down   Frederick Faller
• [TheForge] Japanese Sen experimentation   Frederick Faller
• [TheForge] Japanese Sen experimentation   Frederick Faller
• [TheForge] Putting an oxide finish on mild steel?   Gladish Family
• [TheForge] preserving heat colors   Gladish Family
• [TheForge] CanIron V (Re: Test)   Gladish Family
• [TheForge] air hammer   Gladish Family
• [TheForge] cutting propane cylinders   Gladish Family
• [TheForge] cutting propane cylinders   Gladish Family
• [TheForge] cutting propane cylinders   Gladish Family
• [TheForge] cutting propane cylinders   Gladish Family
• [TheForge] local source of ITC 100   Gladish Family
• [TheForge] cutting propane cylinders- fuel-air mixture   Gladish Family
• [TheForge] A-frame cooking iron   Justin Fellenz
• [TheForge] A-Frame Cooking Iron (coherency and reading comprehension)   Justin Fellenz
• [TheForge] Putting an oxide finish on mild steel?   Justin Fellenz
• [TheForge] Air compressor question   Justin Fellenz
• [TheForge] Air compressor question   Justin Fellenz
• [TheForge] Air compressor question   Justin Fellenz
• [TheForge] cutting propane cylinders   Justin Fellenz
• [TheForge] Thanks Phlip (was: Flint nodules) (OT, Pennsic invitations)   Justin Fellenz
• Pennsic Smith's Party- was Re: [TheForge] Thanks Phlip   Justin Fellenz
• [TheForge] leather   Justin Fellenz
• [TheForge] local source of ITC 100   Justin Fellenz
• [TheForge] cutting propane cylinders (OT, fun with fuel tanks)   Justin Fellenz
• [TheForge] leather   Justin Fellenz
• [TheForge] cutting propane cylinders (OT, fun with fuel tanks)   Justin Fellenz
• [TheForge] Welding advice   Bruce Freeman
• [TheForge] Welding advice   Bruce Freeman
• [TheForge] NJMT (was: rivets: chapter two)   Bruce Freeman
• [TheForge] NJMT   Bruce Freeman
• [TheForge] Wrist problem   Bruce Freeman
• [TheForge] preserving heat colors   Bruce Freeman
• [TheForge] Japanese Sen experimentation   Bruce Freeman
• [TheForge] Japanese Sen experimentation   Bruce Freeman
• [TheForge] Patinas   Bruce Freeman
• [TheForge] long distance freight   Bruce Freeman
• [TheForge] leather   Bruce Freeman
• [TheForge] Flint nodules   Bruce Freeman
• [TheForge] Glass knapping (was: Flint nodules)   Bruce Freeman
• [TheForge] A Source for Rivets   Bruce Freeman
• [TheForge] cutting propane cylinders   Bruce Freeman
• [TheForge] cutting propane cylinders   Bruce Freeman
• [TheForge] Metal porosity and purging tanks (was: cutting propane cylinders- fuel-air mixture)   Bruce Freeman
• [TheForge] wrought iron   Jerry Frost
• [TheForge] wrought iron   Jerry Frost
• [TheForge] Smithing Question   Jerry Frost
• [TheForge] A-frame cooking iron   Jerry Frost
• [TheForge] Wrist   Jerry Frost
• [TheForge] Wrist   Jerry Frost
• [TheForge] A-Frame Cooking Iron   Jerry Frost
• [TheForge] A-Frame Cooking Iron   Jerry Frost
• [TheForge] A-Frame Cooking Iron   Jerry Frost
• [TheForge] A-frame cooking iron   Jerry Frost
• [TheForge] A-frame cooking iron   Jerry Frost
• [TheForge] preserving heat colors   Jerry Frost
• [TheForge] Flint nodules   Jerry Frost
• [TheForge] Wrist problem   GHS
• [TheForge] Off Topic lead vessel   GHS
• [TheForge] Air compressor question   GHS
• [TheForge] Air compressor question   GHS
• [TheForge] air hammer   GHS
• [TheForge] air hammer   GHS
• [TheForge] leather   GHS
• [TheForge] A-frame cooking iron   Kevin Gallagher
• [TheForge] Sorber collection   Marc Godbout
• [TheForge] roper whitney notcher   Jay Hayes
• [TheForge] preserving heat colors   Hochewa at aol.com
• [TheForge] preserving heat colors   Hochewa at aol.com
• [TheForge] preserving heat colors   Hochewa at aol.com
• [TheForge] Welding advice   Michael Horgan
• [TheForge] Test   Michael Horgan
• [TheForge] Conspiracy of silence   Michael Horgan
• [TheForge] Conspiracy of silence   Michael Horgan
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   Michael Horgan
• [TheForge] local source of ITC 100   Michael Horgan
• [TheForge] RE: Smithing Question - Hold down   John Husvar
• [TheForge] RE: Smithing Question - Hold down   John Husvar
• [TheForge] Wrist problem   John Husvar
• [TheForge] Wrist problem   John Husvar
• [TheForge] Wrist problem   John Husvar
• [TheForge] Sorber collection   Rome Hutchings
• [TheForge] Wrist   Jerry
• [TheForge] Wrist   Jerry
• [TheForge] Wrist   Jerry
• [TheForge] DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   Jerry
• [TheForge] DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   Jerry
• [TheForge] CanIron V (Re: Test)   Jerry
• [TheForge] Re: CanIron V   Jerry
• [TheForge] Looking for the cast type hammer drifts...   Jerry
• [TheForge] Looking for the cast type hammer drifts...   Jerry
• [TheForge] Looking for the cast type hammer drifts...   Jerry
• [TheForge] air hammer   Jerry
• [TheForge] air hammer   Jerry
• [TheForge] Forge and Anvil In Ont.   Jerry
• [TheForge] Forge and Anvil In Ont.   Jerry
• [TheForge] air hammer-2   Jerry
• [TheForge] leather   Jerry
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   Jerry
• [TheForge] Re: DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   Dann Johnson
• [TheForge] Re: Conspiracy of silence   Dann Johnson
• [TheForge] Black finish for galvanized   RICK KORINEK
• [TheForge] Black finish for galvanized   RICK KORINEK
• [TheForge] Black finish for galvanized   RICK KORINEK
• [TheForge] Help Save part of the Sorber Collection   RICK KORINEK
• [TheForge] Help Save part of the Sorber Collection   RICK KORINEK
• [TheForge] cutting propane cylinders   RICK KORINEK
• [TheForge] argentium silver   RICK KORINEK
• [TheForge] argentium silver   RICK KORINEK
• [TheForge] Welding advice   Chris Kilpatrick
• [TheForge] Sheet vs plate   Chris Kilpatrick
• [TheForge] Forge and Anvil In Ont.   Chris Kilpatrick
• [TheForge] Forge and Anvil In Ont.   Chris Kilpatrick
• [TheForge] cutting propane cylinders- fuel-air mixture   Chris Kilpatrick
• [TheForge] A-frame cooking iron   Daniel Kretchmar
• [TheForge] A-frame cooking iron   Daniel Kretchmar
• [TheForge] A-Frame Cooking Iron   Daniel Kretchmar
• [TheForge] A-frame cooking iron   Daniel Kretchmar
• [TheForge] CR 1018 .25 x 1.5   Daniel Kretchmar
• [TheForge] CR 1018 .25 x 1.5   Daniel Kretchmar
• [TheForge] helping anvilfire   Daniel Kretchmar
• [TheForge] seeking Bob Tuftee? and flint source?   Daniel Kretchmar
• [TheForge] seeking Bob Tuftee? and flint source?   Daniel Kretchmar
• [TheForge] Thanks Phlip (was: Flint nodules)   Daniel Kretchmar
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Daniel Kretchmar
• [TheForge] Southeastern Blacksmith Conference   Mike Linn
• [TheForge] Interesting Power Hammer   Mike Linn
• [TheForge] seeking Bob Tuftee? and flint source?   Mike Linn
• [TheForge] Flint nodules   Mike Linn
• [TheForge] seeking Bob Tuftee? and flint source?   Mike Linn
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   Loktr at aol.com
• [TheForge] Test   MHF
• [TheForge] Re: Air compressor question   Kenneth Mayer
• [TheForge] Re: long distance freight   Kenneth Mayer
• [TheForge] Titanium   The Millers
• [TheForge] AMF means Adios M ..   The Millers
• [TheForge] WRABA   Mlforge at aol.com
• [TheForge] Welding advice   Walter Mullett
• [TheForge] rivets: chapter two   Walter Mullett
• [TheForge] NJMT (was: rivets: chapter two)   Walter Mullett
• [TheForge] NJMT (was: rivets: chapter two)   Walter Mullett
• [TheForge] Smithing Question   Walter Mullett
• [TheForge] NJMT   Walter Mullett
• [TheForge] Wrist problem   Walter Mullett
• [TheForge] Wrist problem   Walter Mullett
• [TheForge] Wrist problem   Walter Mullett
• [TheForge] Neat Folding Fariers tool on Ebay   Walter Mullett
• [TheForge] Test   Walter Mullett
• [TheForge] Looking for the cast type hammer drifts...   Walter Mullett
• [TheForge] Looking for the cast type hammer drifts...   Walter Mullett
• [TheForge] 301 buffallo   Walter Mullett
• [TheForge] CAD designing   Walter Mullett
• [TheForge] air hammer   Walter Mullett
• [TheForge] air hammer   Walter Mullett
• [TheForge] WRABA   Walter Mullett
• [TheForge] CAD designing   Walter Mullett
• [TheForge] long distance freight   Walter Mullett
• [TheForge] air hammer-2   Walter Mullett
• [TheForge] seeking Bob Tuftee? and flint source?   Walter Mullett
• [TheForge] Sorber collection   Walter Mullett
• [TheForge] Sorber collection   Walter Mullett
• [TheForge] report on one small compressed air portabletankexperience   Walter Mullett
• [TheForge] Black finish for galvanized   Ries Niemi
• [TheForge] Titanium   Ries Niemi
• [TheForge] NJMT (was: rivets: chapter two)   Ries Niemi
• [TheForge] Putting an oxide finish on mild steel?   Ries Niemi
• [TheForge] Re: Off Topic lead vessel   Ries Niemi
• [TheForge] Manual shears and punches   Ries Niemi
• [TheForge] Manual shears and punches   Ries Niemi
• [TheForge] Manual shears and punches   Ries Niemi
• [TheForge] fireplace screen   Ries Niemi
• [TheForge] Arizona   Ries Niemi
• [TheForge] air hammer   Ries Niemi
• [TheForge] long distance freight   Ries Niemi
• [TheForge] Glass knapping (was: Flint nodules)   Ries Niemi
• [TheForge] Brushed Finished Stainless Steel   Ries Niemi
• [TheForge] Auctions   Ries Niemi
• [TheForge] 301 buffallo   Kenny O.
• [TheForge] 301 buffallo   Kenny O.
• [TheForge] RE: Smithing Question - Hold down   Peter Fels & Phoebe Palmer
• [TheForge] RE: Smithing Question - Hold down   Peter Fels & Phoebe Palmer
• [TheForge] RE: Smithing Question - POS pie..OT   Peter Fels & Phoebe Palmer
• [TheForge] Welding Liberty Ships   Peter Fels And Phoebe Palmer
• [TheForge] Putting an oxide finish on mild steel?   Peter Fels And Phoebe Palmer
• [TheForge] RE: AMF   Peter Fels And Phoebe Palmer
• [TheForge] Test   Peter Fels And Phoebe Palmer
• [TheForge] Patinas   Peter Fels And Phoebe Palmer
• [TheForge] Patinas   Peter Fels And Phoebe Palmer
• [TheForge] Conspiracy of silence   Peter Fels And Phoebe Palmer
• [TheForge] Conspiracy of silence   Peter Fels And Phoebe Palmer
• [TheForge] Re: Conspiracy of silence   Peter Fels And Phoebe Palmer
• [TheForge] Help a sinking ship?   Peter Fels And Phoebe Palmer
• [TheForge] cutting propane cylinders   Peter Fels And Phoebe Palmer
• [TheForge] Way OT --- Gopher Vacuum   Peter Fels And Phoebe Palmer
• [TheForge] Japanese Sen experimentation   Mark A. Pesetsky
• [TheForge] Patinas   Mark A. Pesetsky
• [TheForge] Japanese Sen experimentation   Mark A. Pesetsky
• [TheForge] long distance freight   Mark A. Pesetsky
• [TheForge] Roper Whitney Model 100 Corner Notcher   Phil
• [TheForge] roper whitney notcher   Phil
• [TheForge] Re: TheForge Digest, Vol 14, Issue 42   Phil
• [TheForge] seeking Bob Tuftee? and flint source?   Phil
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Phil
• [TheForge] Sheet vs plate   Phlip
• [TheForge] A-Frame Cooking Iron   Phlip
• [TheForge] A-Frame Cooking Iron   Phlip
• [TheForge] Fw: [SCA-AS] Almanac: The Master - Hans Seusenhoffer / Master Emrys.   Phlip
• [TheForge] Neat Folding Fariers tool on Ebay   Phlip
• [TheForge] Fw: [EKMetalsmiths] This might be of interest   Phlip
• [TheForge] Flint nodules   Phlip
• [TheForge] Glass knapping (was: Flint nodules)   Phlip
• [TheForge] Thanks Phlip (was: Flint nodules)   Phlip
• Pennsic Smith's Party- was Re: [TheForge] Thanks Phlip   Phlip
• Pennsic Smith's Party- was Re: [TheForge] Thanks Phlip   Phlip
• [TheForge] Argentium Silver   Phlip
• [TheForge] ALLOYS AND SUPPLIERS FOR MOKUME   Jim Pigott
• [TheForge] Smithing Question   PlumDon at aol.com
• [TheForge] Manual shears and punches   PlumDon at aol.com
• [TheForge] Manual shears and punches   PlumDon at aol.com
• [TheForge] Neat Folding Fariers tool on Ebay   PlumDon at aol.com
• [TheForge] local source of ITC 100   S. Pohlman
• [TheForge] local source of ITC 100   S. Pohlman
• [TheForge] air hammer   Silver Creek Pottery
• [TheForge] air hammer-2   Silver Creek Pottery
• [TheForge] Neat Folding Fariers tool on Ebay   Rick
• [TheForge] Looking for the cast type hammer drifts...   Rick
• [TheForge] Re: Madison   Patty Draper/Bill Robertson
• [TheForge] Welding advice -- Now Heavy Welds   Chuck Robinson
• [TheForge] Welding advice -- Now Heavy Welds   Chuck Robinson
• [TheForge] rivets: chapter two   Chuck Robinson
• [TheForge] Titanium   Chuck Robinson
• [TheForge] Titanium   Chuck Robinson
• [TheForge] Titanium   Chuck Robinson
• [TheForge] Air compressor question   Chuck Robinson
• [TheForge] Air compressor question   Chuck Robinson
• [TheForge] Air compressor question   Chuck Robinson
• [TheForge] leather   Chuck Robinson
• [TheForge] AMF means Adios M ..   Schade
• [TheForge]Help a sinking ship?   Schade
• [TheForge] Glass knapping (was: Flint nodules)   Schade
• [TheForge] Auctions   Schade
• [TheForge] local source of ITC 100   Schade
• [TheForge] local source of ITC 100   Schade
• [TheForge] cutting propane cylinders- fuel-air mixture   Schade
• [TheForge] Metal porosity and purging tanks (was: cutting propane cylinders- fuel-air mixture)   Schade
• [TheForge] cutting propane cylinders (OT, fun with fuel tanks)   Craig Schaefer
• [TheForge] Neat Folding Fariers tool on Ebay   Dan Scheid
• [TheForge] long distance freight   Fiorini & Skiles
• [TheForge] thanks- shipping info (& sales pitch)   Fiorini & Skiles
• [TheForge] tarnish-free silver info   Fiorini & Skiles
• [TheForge] argentium silver   Fiorini & Skiles
• [TheForge] silver cost   Fiorini & Skiles
• [TheForge] RE: Smithing Question - Hold down   Steve Smith
• [TheForge] Wrist problem   Steve Smith
• [TheForge] Putting an oxide finish on mild steel?   Steve Smith
• [TheForge] Wrist   Steve Smith
• [TheForge] AMF means Adios M ..   Steve Smith
• [TheForge] air hammer   Steve Smith
• [TheForge] Looking for the cast type hammer drifts...   Steve Smith
• [TheForge] air hammer   Steve Smith
• [TheForge] cutting propane cylinders   Steve Smith
• [TheForge] cutting propane cylinders- fuel-air mixture   Steve Smith
• [TheForge] Metal porosity and purging tanks (was: cutting propane cylinders- fuel-air mixture)   Steve Smith
• [TheForge] Welding advice -- Now Heavy Welds   David E. Smucker
• [TheForge] Welding advice -- Now Heavy Welds   David E. Smucker
• [TheForge] Sheet vs plate   David E. Smucker
• [TheForge] Sheet vs plate   David E. Smucker
• [TheForge] riveted joints aren't flexible   David E. Smucker
• [TheForge] rivets: chapter two and half   David E. Smucker
• [TheForge] Titanium   David E. Smucker
• [TheForge] Titanium   David E. Smucker
• [TheForge] Titanium   David E. Smucker
• [TheForge] CR 1018 .25 x 1.5   David E. Smucker
• [TheForge] Air compressor question   David E. Smucker
• [TheForge] Looking for the cast type hammer drifts...   David E. Smucker
• [TheForge] air hammer   David E. Smucker
• [TheForge] Re: Off Topic lead vessel   Mike Spencer
• [TheForge] Re: Off Topic lead vessel   Mike Spencer
• [TheForge] Re: A-frame cooking iron   Mike Spencer
• [TheForge] Re: CR 1018 .25 x 1.5   Mike Spencer
• [TheForge] Re: Test   Mike Spencer
• [TheForge] CanIron V (Re: Test)   Mike Spencer
• [TheForge] Re: CanIron V   Mike Spencer
• [TheForge] seeking Bob Tuftee? and flint source?   Paul Sperbeck
• [TheForge] Welding advice- carbon arc   Ralph Sproul
• [TheForge] Welding advice   Ralph Sproul
• [TheForge] Welding Liberty Ships   Ralph Sproul
• [TheForge] Smithing Question   Ralph Sproul
• [TheForge] RE: Smithing Question - POS pie   Ralph Sproul
• [TheForge] AMF means Adios M ..   Ralph Sproul
• [TheForge] preserving heat colors   Ralph Sproul
• [TheForge] Re: Test   Ralph Sproul
• [TheForge] HERE"S THE REAL Link! Sorry   Ralph Sproul
• [TheForge] Looking for the cast type hammer drifts...   Ralph Sproul
• [TheForge] cutting propane cylinders   Ralph Sproul
• [TheForge] cutting propane cylinders   Ralph Sproul
• [TheForge] cutting propane cylinders- fuel-air mixture   Ralph Sproul
• [TheForge] cutting propane cylinders- fuel-air mixture   Ralph Sproul
• [TheForge] Putting an oxide finish on mild steel?   Aaron Stavens
• [TheForge] preserving heat colors   Aaron Stavens
• [TheForge] Looking for the cast type hammer drifts...   Howell Steve
• [TheForge] Smithing Question   John Switzer
• [TheForge] FREE Picture Processing Software   Carl Tappan
• [TheForge] roper whitney notcher   Ed Thomas
• [TheForge] Re: TheForge Digest, Vol 14, Issue 42   Ed Thomas
• [TheForge] Anvilfire   Ed Thomas
• [TheForge] riveted joints aren't flexible   Thomas A. Troszak
• [TheForge] rivets: chapter two   Thomas A. Troszak
• [TheForge] rivets and bolts and blacksmiths   Thomas A. Troszak
• [TheForge] rivets revisited   Thomas A. Troszak
• [TheForge] riveting references   Thomas A. Troszak
• [TheForge] OT: boiler explosion cause   Thomas A. Troszak
• [TheForge] wrought iron   Dan Tull
• [TheForge] Titanium   Dan Tull
• [TheForge] Smithing Question   Dan Tull
• [TheForge] NJMT   Dan Tull
• [TheForge] preserving heat colors   Dan Tull
• [TheForge] leather   Dan Tull
• [TheForge] Welding advice   Andrew Vida
• [TheForge] Welding advice   Andrew Vida
• [TheForge] Welding advice -- Now Heavy Welds   Andrew Vida
• [TheForge] Welding advice   Andrew Vida
• [TheForge] Welding advice   Andrew Vida
• [TheForge] Black finish for galvanized   Andrew Vida
• [TheForge] Welding Liberty Ships   Andrew Vida
• [TheForge] Sheet vs plate   Andrew Vida
• [TheForge] wrought iron   Andrew Vida
• [TheForge] wrought iron   Andrew Vida
• [TheForge] wrought iron OT   Andrew Vida
• [TheForge] Titanium   Andrew Vida
• [TheForge] Titanium   Andrew Vida
• [TheForge] NJMT   Andrew Vida
• [TheForge] NJMT   Andrew Vida
• [TheForge] NJMT   Andrew Vida
• [TheForge] Wrist   Andrew Vida
• [TheForge] Another lesson   Andrew Vida
• [TheForge] Putting an oxide finish on mild steel?   Andrew Vida
• [TheForge] Putting an oxide finish on mild steel?   Andrew Vida
• [TheForge] Help a sinking ship?   Andrew Vida
• [TheForge] Looking for the cast type hammer drifts...   Andrew Vida
• [TheForge] Looking for the cast type hammer drifts...   Andrew Vida
• [TheForge] air hammer   Andrew Vida
• [TheForge] air hammer   Andrew Vida
• [TheForge] long distance freight   Andrew Vida
• [TheForge] long distance freight   Andrew Vida
• [TheForge] leather   Andrew Vida
• [TheForge] Brushed Finished Stainless Steel   Andrew Vida
• [TheForge] leather   Andrew Vida
• [TheForge] leather   Andrew Vida
• [TheForge] Argentium Silver   Andrew Vida
• [TheForge] leather   Andrew Vida
• [TheForge] Brushed Finished Stainless Steel OT OT OT OT Noo Joizee   Andrew Vida
• [TheForge] leather   Andrew Vida
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Andrew Vida
• [TheForge] silver cost   Andrew Vida
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Andrew Vida
• [TheForge] argentium silver   Andrew Vida
• [TheForge] Sale of Bill Gichner's Books and Equipment 7-8 May 2005   Andrew Vida
• [TheForge] Powell's...   Andrew Vida
• [TheForge] Auctions   Andrew Vida
• [TheForge] Very OT: deadly assault bananas foil robbery.   Andrew Vida
• [TheForge] fireplace screen   Wayne
• [TheForge] report on one small compressed air portable tank experience   The Wilson's
• [TheForge] NJMT (was: rivets: chapter two)   Woolley
• [TheForge] Smithing Question   Woolley
• [TheForge] Smithing Question   Woolley
• [TheForge] Smithing Question   Woolley
• [TheForge] Putting an oxide finish on mild steel?   Woolley
• [TheForge] Another lesson   Woolley
• [TheForge] Putting an oxide finish on mild steel?   Woolley
• [TheForge] Brushed Finished Stainless Steel   Woolley
• [TheForge] Interesting Power Hammer   Chris Worsley
• [TheForge] Help a sinking ship?   Chris Worsley
• [TheForge] Looking for the cast type hammer drifts...   Chris Worsley
• [TheForge] Arizona   Chris Worsley
• [TheForge] Sorber collection   Chris Worsley
• [TheForge] local source of ITC 100   Larry Zoeller
• [TheForge] Titanium   debmiller at fuse.net
• [TheForge] Japanese Sen experimentation   debmiller at fuse.net
• [TheForge] fireplace screen   debmiller at fuse.net
• [TheForge] FREE Picture Processing Software   debmiller at fuse.net
• [TheForge] HERE"S THE REAL Link! Sorry   debmiller at fuse.net
• [TheForge] leather   debmiller at fuse.net
• [TheForge] leather   debmiller at fuse.net
• [TheForge] Brushed Finished Stainless Steel   debmiller at fuse.net
• [TheForge] Brushed Finished Stainless Steel   debmiller at fuse.net
• [TheForge] Brushed Finished Stainless Steel   debmiller at fuse.net
• [TheForge] Brushed Finished Stainless Steel   debmiller at fuse.net
• [TheForge] Brushed Finished Stainless Steel OT OT OT OT Noo Joizee   debmiller at fuse.net
• [TheForge] Looking for the cast type hammer drifts...   ed
• [TheForge] Looking for the cast type hammer drifts...   ed
• [TheForge] Sheet vs plate   gabriel at dreamingcrow.com
• [TheForge] Welding advice -- Now Heavy Welds   gblacksmith
• [TheForge] Welding Liberty Ships   gblacksmith
• [TheForge] fireplace screen   gblacksmith
• [TheForge] air hammer   kim george
• [TheForge] air hammer-2   kim george
• [TheForge] Welding Liberty Ships   greg
• [TheForge] Electronic rust removal: stainless anode?   greg
• [TheForge] cutting propane cylinders   greg
• [TheForge] local source of ITC 100   greg
• Dashboards (was: RE: [TheForge] Neat Folding Fariers tool on Ebay)   kent
• [TheForge] Re: Japanese Sen experimentation   kent
• [TheForge] Test ot   magichammer
• [TheForge] test   magichammer
• [TheForge] DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   magichammer
• [TheForge] DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   magichammer
• [TheForge] DAKOTA ARTIST-BLACKSMITHS' ASSOCIATION   magichammer
• [TheForge] Air compressor question   magichammer
• [TheForge] Air compressor question   magichammer
• [TheForge] Air compressor question   magichammer
• [TheForge] Japanese Sen experimentation   magichammer
• [TheForge] Help Save part of the Sorber Collection   magichammer
• [TheForge] Test   magichammer
• [TheForge] Conspiracy of silence   magichammer
• [TheForge] Re: Test   magichammer
• [TheForge] CanIron V (Re: Test)   magichammer
• [TheForge] Help Save part of the Sorber Collection   magichammer
• [TheForge] Help a sinking ship?   magichammer
• [TheForge]Help a sinking ship?   magichammer
• [TheForge] air hammer   magichammer
• [TheForge] Anvilfire   magichammer
• [TheForge] Electronic rust removal: stainless anode?   northpt at blarg.net
• [TheForge] long distance freight   northpt at blarg.net
• [TheForge] NC Abana Meeting hosted by Big Blu Hammer Mfg.   oakhilliron at bellsouth.net
• [TheForge] Welding Liberty Ships   xlch58 at swbell.net
• [TheForge] Sheet vs plate   xlch58 at swbell.net
• [TheForge] Manual shears and punches   xlch58 at swbell.net
• [TheForge] Manual shears and punches   xlch58 at swbell.net
• [TheForge] Wrist   xlch58 at swbell.net
• [TheForge] Putting an oxide finish on mild steel?   xlch58 at swbell.net
• [TheForge] Putting an oxide finish on mild steel?   xlch58 at swbell.net
• [TheForge] Neat Folding Fariers tool on Ebay   xlch58 at swbell.net
• [TheForge] Neat Folding Fariers tool on Ebay   xlch58 at swbell.net
• [TheForge] leather   xlch58 at swbell.net
• [TheForge] leather   xlch58 at swbell.net
• [TheForge] cutting propane cylinders   xlch58 at swbell.net
• [TheForge] cutting propane cylinders   xlch58 at swbell.net
• [TheForge] cutting propane cylinders- fuel-air mixture   xlch58 at swbell.net
• [TheForge] Way OT --- Gopher Vacuum   xlch58 at swbell.net

Last message date: Thu Mar 31 23:44:47 EST 2005
Archived on: Thu Mar 31 23:45:56 EST 2005

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...