April 2005 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Apr 1 08:42:45 EST 2005
Ending: Sat Apr 30 23:47:08 EST 2005
Messages: 320

• [TheForge] WRABA sale items for Sorber collection   Walter Mullett
  • [TheForge] WRABA sale items for Sorber collection   xlch58 at swbell.net
• [TheForge] local source of ITC 100   Gladish Family
  • [TheForge] local source of ITC 100   Mark A. Pesetsky
• [TheForge] Re: cutting propane cylinders- fuel-air mixture   jack andrews
• [TheForge] local source of ITC 100   Jeffrey Polaski
• [TheForge] local source of ITC 100   Larry Zoeller
• [TheForge] local source of ITC 100   S. Pohlman
  • [TheForge] local source of ITC 100   Gladish Family
  • [TheForge] local source of ITC 100   Steve Smith
• [TheForge] Testing   Keporter at aol.com
• [TheForge] local source of ITC 100   Keporter at aol.com
  • [TheForge] local source of ITC 100   Michael Horgan
  • [TheForge] local source of ITC 100   Gladish Family
• [TheForge] local source of ITC 100   Keporter at aol.com
  • [TheForge] local source of ITC 100   Gladish Family
    • [TheForge] local source of ITC 100   Mark A. Pesetsky
      • [TheForge] local source of ITC 100   Schade
      • [TheForge] local source of ITC 100   Jay Hayes
      • [TheForge] iron sale in chicago   Schade
      • [TheForge] A-frame cooking iron   John Switzer
      • [TheForge] local source of ITC 100   Schade
• [TheForge] local source of ITC 100   Keporter at aol.com
• [TheForge] long distance freight   celtarch at direcway.com
• [TheForge] seeking Bob Tuftee? and flint source?   celtarch at direcway.com
• [TheForge] local source of ITC 100   Keporter at aol.com
  • [TheForge] local source of ITC 100   Gladish Family
• [TheForge] local source of ITC 100   S. Pohlman
  • [TheForge] local source of ITC 100   Chuck Robinson
  • [TheForge] local source of ITC 100   Mark A. Pesetsky
    • [TheForge] local source of ITC 100   S. Pohlman
• [TheForge] local source of ITC 100   PlumDon at aol.com
  • [TheForge] drilling 3/8 rod   Ralph Sproul
    • [TheForge] drilling 3/8 rod   Ron Childers
• [TheForge] Drilling holes in rods   PlumDon at aol.com
  • [TheForge] Drilling holes in rods   knight fish
  • [TheForge] Drilling holes in rods   magichammer
    • [TheForge] Drilling holes in rods   Schade
      • [TheForge] Drilling holes in rods   magichammer
• [TheForge] local source of ITC 100   Justin Fellenz
  • [TheForge] local source of ITC 100   Ralph Sproul
• [TheForge] local source of ITC 100   Justin Fellenz
• [TheForge] Drilling holes in rods   debmiller at fuse.net
• [TheForge] Re: Drilling jig   Bob Ehrenberger
• [TheForge] Re: Drilling jig   Justin Fellenz
• [TheForge] Rodent Wrist   Jerry
• [TheForge] long distance freight   S. Pohlman
• [TheForge] Re: Drilling jig   PlumDon at aol.com
  • [TheForge] Re: Drilling jig   Mark A. Pesetsky
• [TheForge] Re: Drilling jig   PlumDon at aol.com
  • [TheForge] Re: Drilling jig   Ralph Sproul
• [TheForge] Drilling holes in rods   PlumDon at aol.com
  • [TheForge] Drilling holes in rods   magichammer
    • [TheForge] Drilling holes in rods   Blacksmith
    • [TheForge] Drilling holes in rods   Peter Fels And Phoebe Palmer
      • [TheForge] Drilling holes in rods   greg
      • [TheForge] Drilling holes in rods   magichammer
• [TheForge] Drilling holes in rods   PlumDon at aol.com
• [TheForge] Re: Drilling jig   Bob Ehrenberger
• [TheForge] Drilling holes in rods   Bruce Freeman
• [TheForge] FW: Possible truckload shipment to Portland - Vancouver area   Howell Steve
• [TheForge] Surgery Date   Jerry
  • [TheForge] Surgery Date   Barking Crow
  • [TheForge] Surgery Date   David E. Smucker
  • [TheForge] Surgery Date   magichammer
  • [TheForge] Re: Surgery Date   Mike Spencer
  • [TheForge] Surgery Date   John Husvar
• [TheForge] Surgery Date   Justin Fellenz
• [TheForge] Building my gas forge-vertical or horizontal?   kent
  • [TheForge] Building my gas forge-vertical or horizontal?   Mark A. Pesetsky
  • [TheForge] Building my gas forge-vertical or horizontal?   Jerry Frost
  • [TheForge] Building my gas forge-vertical or horizontal?   Dan Tull
• [TheForge] OT Test   magichammer
  • [TheForge] OT Test   Kevin D
    • [TheForge] OT Test   magichammer
    • [TheForge] Re painting machinery was : OT Test   xlch58 at swbell.net
      • [TheForge] Re painting machinery was : OT Test   xlch58 at swbell.net
      • [TheForge] Re painting machinery was : OT Test   Kevin D
      • [TheForge] Re painting machinery was : OT Test   Clyde
      • [TheForge] Re painting machinery was : OT Test   Jerry Frost
      • [TheForge] Re painting machinery was : OT Test   Clyde
      • [TheForge] Re painting machinery was : OT Test   Gladish Family
      • [TheForge] Re painting machinery was : OT Test   Jerry Frost
      • [TheForge] (no subject)   Schade
      • [TheForge] Is it On?   Dave Smucker
      • [TheForge] Re painting machinery was : OT Test   Kevin D
• [TheForge] OT Test   Justin Fellenz
• [TheForge] Re painting machinery was : OT Test   Keporter at aol.com
• [TheForge] Re: Re painting machinery was : OT Test   kent
• [TheForge] Re: Update Drilling holes in rods   PlumDon at aol.com
• [TheForge] cutting 1/4 copper   Kevin D
  • [TheForge] cutting 1/4 copper   magichammer
    • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   Grover Richardson
      • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   magichammer
      • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   Steve Smith
      • [TheForge] cutting 1/4 copper   Grover Richardson
      • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   Justin Fellenz
      • [TheForge] cutting 1/4 copper   Grover Richardson
      • [TheForge] cutting 1/4 copper   Steve Smith
      • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   Grover Richardson
      • [TheForge] was cutting 1/4 copper now welders   Grover Richardson
      • [TheForge] was cutting 1/4 copper now welders   Steve Smith
      • [TheForge] was cutting 1/4 copper now welders   Kevin D
      • [TheForge] now The Amateur Scientist -- from Scientific American   David E. Smucker
      • [TheForge] now The Amateur Scientist -- from Scientific American   Grover Richardson
      • [TheForge] now The Amateur Scientist -- from Scientific American   Gladish Family
      • [TheForge] now The Amateur Scientist -- from Scientific American   Grover Richardson
      • [TheForge] glass   schade at acegroup.cc
      • [TheForge] glass   John Switzer
      • [TheForge] glass   magichammer
      • [TheForge] now The Amateur Scientist -- from Scientific American   Gladish Family
  • [TheForge] cutting 1/4 copper   Darrell
  • [TheForge] cutting 1/4 copper   gblacksmith
    • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   gblacksmith
  • [TheForge] cutting 1/4 copper   Ralph Sproul
  • [TheForge] cutting 1/4 copper   Blacksmith
  • [TheForge] cutting 1/4 copper   Larry Brown
• [TheForge] cutting 1/4 copper   Bruce Freeman
  • [TheForge] cutting 1/4 copper   Kevin D
  • [TheForge] cutting 1/4 copper   David E. Smucker
    • [TheForge] cutting 1/4 copper   Kevin D
      • [TheForge] cutting 1/4 copper   greg
      • [TheForge] cutting 1/4 copper   Jerry Frost
• [TheForge] cutting 1/4 copper   Justin Fellenz
  • [TheForge] cutting 1/4 copper   Kevin D
• [TheForge] cutting 1/4 copper   Chris Kilpatrick
  • [TheForge] cutting 1/4 copper   Kevin D
    • [TheForge] Re: cutting 1/4 copper   Mike Spencer
      • [TheForge] Re: cutting 1/4 copper   Kevin D
• [TheForge] cutting 1/4 copper   debmiller at fuse.net
• [TheForge] cutting 1/4 copper   Bob Ehrenberger
  • [TheForge] cutting 1/4 copper   Kevin D
• [TheForge] Re: cutting copper   LrdThorolf at aol.com
• [TheForge] cutting 1/4 copper   debmiller at fuse.net
• [TheForge] Welding Cast Iron   Phil
  • [TheForge] Welding Cast Iron   magichammer
  • [TheForge] Welding Cast Iron   knight fish
    • [TheForge] Welding Cast Iron   Ron Childers
  • [TheForge] Welding Cast Iron   Woolley
• [TheForge] Article on cast iron and early cauldrons   Phlip
• [TheForge] Welding Cast Iron   Mlforge at aol.com
• [TheForge] Welding Cast Iron   Chris Kilpatrick
• [TheForge] Welding Cast Iron   Phil
  • [TheForge] Welding Cast Iron   Ron Childers
• [TheForge] Welding Cast Iron   Justin Fellenz
• [TheForge] Welding Cast Iron   Chris Kilpatrick
  • [TheForge] Welding electrodes   Ron Childers
• [TheForge] Welding electrodes   Chris Kilpatrick
  • [TheForge] Welding electrodes   Schade
  • [TheForge] Welding electrodes   Larry Brown
  • [TheForge] Welding electrodes   Ralph Sproul
  • [TheForge] Welding electrodes   JOHN CHOBRDA
    • [TheForge] Welding electrodes   John Husvar
      • [TheForge] Welding electrodes   Ron Childers
• [TheForge] cutting 1/4 copper   TodEstesRN at aol.com
• [TheForge] Steel weight   Phlip
  • [TheForge] Steel weight   Steve Smith
    • [TheForge] Steel weight   Jerry
      • [TheForge] Steel weight   Jerry
      • [TheForge] Steel weight   Marc Godbout
      • [TheForge] Steel weight   Phlip
  • [TheForge] Steel weight   Jerry Frost
    • [TheForge] Steel weight   gblacksmith
      • [TheForge] Steel weight   Ron Childers
      • [TheForge] Steel weight   mrscherm at aol.com
    • [TheForge] Steel weight   David E. Smucker
  • [TheForge] Drilling centered transverse hole   Mike Spencer
• [TheForge] welding... my two cents   S. Pohlman
  • [TheForge] welding... my two cents   Woolley
    • [TheForge] welding... my two cents   S. Pohlman
• [TheForge] I want a T-shirt...   Phlip
  • [TheForge] I want a T-shirt...   Rick
    • [TheForge] I want a T-shirt...   gblacksmith
      • [TheForge] I want a T-shirt...   Jerry Frost
• [TheForge] Steel weight   Chris Kilpatrick
• [TheForge] Steel weight   Bruce Freeman
• [TheForge] Super Quenched Dies?   Carl Tappan
  • [TheForge] Super Quenched Dies?   Dan Tull
    • [TheForge] Super Quenched Dies?   David E. Smucker
      • [TheForge] Super Quenched Dies?   schade at acegroup.cc
      • [TheForge] Super Quenched Dies?   Dan Tull
  • [TheForge] Super Quenched Dies?   jolarson at comcast.net
  • [TheForge] Super Quenched Dies?   magichammer
• [TheForge] interested   Andi Ward
  • [TheForge] interested   Phlip
  • [TheForge] interested   Aaron Silver
  • [TheForge] interested   magichammer
• [TheForge] Super Quenched Dies?   Albin Drzewianowski
  • [TheForge] Super Quenched Dies?   Peter Fels And Phoebe Palmer
    • [TheForge] Super Quenched Dies?   Carl Tappan
      • [TheForge] Super Quenched Dies?   Ron Childers
      • [TheForge] Super Quenched Dies?   schade at acegroup.cc
      • [TheForge] Super Quenched Dies?   Ron Childers
      • [TheForge] Super Quenched Dies?   Gladish Family
      • [TheForge] Super Quenched Dies?   Ron Childers
      • [TheForge] Super Quenched Dies?   magichammer
• [TheForge] Southeastern Blacksmith Conference - Camping   Phil
  • [TheForge] Southeastern Blacksmith Conference - Camping   Mike Linn
• [TheForge] Super Quenched Dies?   Chris Kilpatrick
  • [TheForge] Super Quenched Dies?   Dan Tull
    • [TheForge] Super Quenched Dies?   Ron Childers
      • [TheForge] Super Quenched Dies?   Dan Tull
    • [TheForge] Super Quenched Dies?   schade at acegroup.cc
• [TheForge] Super Quenched Dies?   Chris Kilpatrick
  • [TheForge] Super Quenched Dies?   Dan Tull
    • [TheForge] Super Quenched Dies? Now trial and error   Grover Richardson
      • [TheForge] Super Quenched Dies? Now trial and error   Dan Tull
      • [TheForge] Super Quenched Dies? Now trial and error   Jim Pigott
      • [TheForge] Super Quenched Dies? Now trial and error   Dan Tull
      • [TheForge] Super Quenched Dies? Now trial and error   Grover Richardson
    • [TheForge] Super Quenched Dies?   David E. Smucker
      • [TheForge] Super Quenched Dies?   Carl Tappan
      • [TheForge] Super Quenched Dies?   David E. Smucker
    • [TheForge] Super Quenched Dies?   schade at acegroup.cc
      • [TheForge] Super Quenched Dies?   Dan Tull
• YAK [TheForge] Super Quenched Dies? Now trial and error   Chris Kilpatrick
• [TheForge] [Fwd: Re: [castinghobby] Re: need welding goggles?]   xlch58 at swbell.net
  • [TheForge] [Fwd: Re: [castinghobby] Re: need welding goggles?]   xlch58 at swbell.net
• [TheForge] Pure Iron and 00Fe   April & Bill Clemens
  • [TheForge] Pure Iron and 00Fe   Steve Smith
    • [TheForge] Pure Iron and 00Fe   April & Bill Clemens
• [TheForge] Super Quenched Dies? Now trial and error, completly off topic now   TodEstesRN at aol.com
  • [TheForge] Super Quenched Dies? Now trial and error, completly off topic now   Dan Tull
    • [TheForge] Rebar   Ron Childers
      • [TheForge] Rebar   Dan Tull
• [TheForge] Dan Tull... (off topic)   Phil
• [TheForge] Hand Tools in History - Davistown Museum   magichammer
• [TheForge] Cut-off hardies   Phlip
  • [TheForge] Re: Cut-off hardies   Mike Spencer
• [TheForge] Cut-off hardies   Phil
  • [TheForge] Cut-off hardies   Phlip
• [TheForge] Cut-off hardies   Bruce Freeman
• [TheForge] table weight   SRiverF at aol.com
  • [TheForge] table weight   David E. Smucker
    • [TheForge] table weight   marc3rd at comcast.net
    • [TheForge] Math   Ron Childers
      • [TheForge] Math   Grover Richardson
      • [TheForge] Math   Phlip
      • [TheForge] Math   magichammer
• [TheForge] table weight   SRiverF at aol.com
• [TheForge] table weight   SRiverF at aol.com
• [TheForge] table weight   debmiller at fuse.net
  • [TheForge] table weight   David E. Smucker
  • [TheForge] table weight   Gladish Family
    • [TheForge] table weight   Kevin D-
      • [TheForge] table weight   Ralph Sproul
      • [TheForge] table weight   Gladish Family
    • [TheForge] table weight   Clyde
    • [TheForge] table weight   Chuck Robinson
• [TheForge] table weight   Chris Kilpatrick
  • [TheForge] table weight   JOHN CHOBRDA
    • [TheForge] table weight   schade at acegroup.cc
    • [TheForge] table weight   Gladish Family
  • [TheForge] table weight   Ries Niemi
• [TheForge] table weight   debmiller at fuse.net
• [TheForge] table weight   debmiller at fuse.net
• [TheForge] table weight/scrap price   Bob Ehrenberger
• [TheForge] table weight   debmiller at fuse.net
• [TheForge] Dona Meilach - Teapots   PlumDon at aol.com
  • [TheForge] Dona Meilach - Teapots   The Millers
  • [TheForge] Dona Meilach - Teapots   magichammer
• [TheForge] tool steel mark   Ron Swisher
  • [TheForge] tool steel mark   David E. Smucker
    • [TheForge] tool steel mark   Ron Swisher
      • [TheForge] tool steel mark   David E. Smucker
      • [TheForge] tool steel mark   Ron Swisher
      • [TheForge] tool steel mark   xlch58 at swbell.net
• [TheForge] Cut-off hardies   TodEstesRN at aol.com
• [TheForge] table weight   TodEstesRN at aol.com
• [TheForge] Math   SRiverF at aol.com
  • [TheForge] Math, H/L sec, etc   Ron Childers
    • [TheForge] Math, H/L sec, etc   Dan Tull
      • [TheForge] Flight test   Ron Childers
• [TheForge] gilderspaste?   Fiorini & Skiles
  • [TheForge] gilderspaste?   Peter Fels And Phoebe Palmer
• [TheForge] gilderspaste?   debmiller at fuse.net
• [TheForge] gilderspaste?   Mlforge at aol.com
• [TheForge] Flight test   Dan Tull
• [TheForge] gilders paste   Fiorini & Skiles
• [TheForge] Flight test   rfertner at cox.net
• [TheForge] gilders paste   debmiller at fuse.net
• [TheForge] gilders paste   Mlforge at aol.com
  • [TheForge] gilders paste   Dan Tull
    • [TheForge] gilders paste   gblacksmith
      • [TheForge] God, I love the junkyard. A huge post vise!   Barking Crow
      • [TheForge] God, I love the junkyard. A huge post vise!   Ron Childers
      • [TheForge] Re: God, I love the junkyard. A huge post vise!   Dann Johnson
      • [TheForge] Re: God, I love the junkyard. A huge post vise!   Barking Crow
      • [TheForge] Re: God, I love the junkyard. A huge post vise!   Patty Draper/Bill Robertson
      • [TheForge] God, I love the junkyard. A huge post vise!   Jerry Frost
• [TheForge] Fw: [EKMetalsmiths] URL - Forging...   Phlip
  • [TheForge] way way OT (solar systems)   Dan Scheid
    • [TheForge] way way OT (solar systems)   Ron Childers
    • [TheForge] way way OT (solar systems)   Walter Mullett
    • [TheForge] way way OT (solar systems)   magichammer
• [TheForge] way way OT (solar systems)   Chris Kilpatrick
  • [TheForge] way way OT (solar systems)   Gladish Family
• [TheForge] God, I love the junkyard. A huge post vise!   Frederick Faller
  • [TheForge] Free the post vise!   Ron Childers
• [TheForge] way way OT (solar systems)   Frederick Faller
• [TheForge] way way OT (solar systems)   Chris Kilpatrick
• [TheForge] solar systems   S. Pohlman
  • [TheForge] solar systems   Ries Niemi
    • [TheForge] solar systems   James Binnion
      • [TheForge] solar systems   John Switzer
      • [TheForge] solar systems   James Binnion
      • [TheForge] solar systems   John Switzer
      • [TheForge] solar systems   James Binnion
      • [TheForge] solar systems   schade at acegroup.cc
• [TheForge] Re: solar house.   LrdThorolf at aol.com
• [TheForge] Funky right angle drive mechanism   xlch58 at swbell.net
• [TheForge] Rub it In... Hee-Hee   Mike Linn
  • [TheForge] Rub it In... Hee-Hee   Ken Mortimer
  • [TheForge] Rub it In... Hee-Hee   Michael Horgan

Last message date: Sat Apr 30 23:47:08 EST 2005
Archived on: Sat Apr 30 23:53:26 EST 2005

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...