[TheForge] table weight

[marc3rd at comcast.net]

And that is probably not counting the legs. I'll bet is has some hefty legs
to support that kind of weight!
----- Original Message ----- 
From: "David E. Smucker" <davesmucker at hotmail.com>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Monday, April 25, 2005 8:24 PM
Subject: Re: [TheForge] table weight


> About 3 tons, can't you do the math?  I use 0.3 pounds per cubic inch.(.28
> is a little better)  14 feet equals 168 inches, 7 foot 7 equals 91 inches,
> So the volume is equal to 168 x 91 x 1.25 = 19110 cubic inches.  Take the
> volume times 0.3 equals 5733 pounds or a little less than 3 tons.
>
> Dave
> ----- Original Message ----- 
> From: <SRiverF at aol.com>
> To: <theforge at mailman.qth.net>
> Sent: Monday, April 25, 2005 8:01 PM
> Subject: [TheForge] table weight
>
>
> >I have someone selling me a table for the scrap weight, Can anyone tell
me
> > what a table 14' X 7' - 7" x 1& 1/4" thick would weight?
> >
> > /Thanks
> > Mike IVey
> > Savannah River  Forge
> > _______________________________________________
> > Manage membership or unsubscribe at:
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is
> > http://www.photoaccess.com
> > Login:  blacksmithblacksmith at hotmail.com
> > password:  anvil
> > ___________
> >
> >
> >
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>