October 2005 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Oct 1 08:03:41 EST 2005
Ending: Mon Oct 31 23:58:37 EST 2005
Messages: 335

• [TheForge] Nasty Slack Tub now sealer   Ralph Sproul
  • [TheForge] Nasty Slack Tub now sealer   Grant Marcoux
    • [TheForge] Nasty Slack Tub now sealer   Ralph Sproul
• [TheForge] Re: bridge crane   Ralph Sproul
  • [TheForge] Re: bridge crane   Woolley
    • [TheForge] Re: bridge crane   Ralph Sproul
      • [TheForge] Re: bridge crane   Woolley
    • [TheForge] Re: bridge crane   Jay Hayes
      • [TheForge] Re: bridge crane   Ralph Sproul
      • [TheForge] Re: bridge crane   Dann
      • [TheForge] Re: bridge crane   Jay Hayes
      • [TheForge] Re: bridge crane   xlch58 at swbell.net
• [TheForge] bridge crane   Ralph Sproul
• [TheForge] forging copper?   Ralph Sproul
• [TheForge] Input wanted   Tod Estes
• [TheForge] Re: Bridge Crane (off-list response)   Bruce Freeman
• [TheForge] Re: bridge crane   debmiller at fuse.net
• [TheForge] drop hammer   Bruce Freeman
  • [TheForge] drop hammer   mrscherm at aol.com
    • [TheForge] drop hammer   Rick
  • [TheForge] drop hammer   Nick Vincent
• [TheForge] drop hammer   Chris Kilpatrick
• [TheForge] treadle fuller   Bruce Freeman
• [TheForge] Input wanted   Bruce Freeman
  • [TheForge] Input wanted   Jerry Frost
    • [TheForge] Input wanted   Justin Fellenz
      • [TheForge] Input wanted   Jerry Frost
      • [TheForge] Input wanted   Darrell
      • [TheForge] Input wanted   Jerry Frost
      • [TheForge] Input wanted   John Husvar
      • [TheForge] Input wanted   Jerry Frost
      • [TheForge] Input wanted   Darrell
      • [TheForge] Input wanted   Justin Fellenz
      • [TheForge] Input wanted   Justin Fellenz
      • [TheForge] Input wanted   Darrell
      • [TheForge] Input wanted   Justin Fellenz
      • [TheForge] Input wanted   Jerry Frost
      • [TheForge] Input wanted   Darrell
      • [TheForge] Input wanted   Jerry Frost
      • [TheForge] Input wanted   Justin Fellenz
      • [TheForge] Input wanted (more)   Justin Fellenz
      • [TheForge] Input wanted (more)   Phlip
      • [TheForge] Input wanted (more)   Justin Fellenz
      • [TheForge] Input wanted (more)   Phlip
• [TheForge] Multi 2500VR Electrostatic Plate Maker   Chris Kilpatrick
• [TheForge] "DROP" Hammer   Jonathan Nedbor
  • [TheForge] "DROP" Hammer   Justin Fellenz
    • [TheForge] "DROP" Hammer   Dann
    • [TheForge] "DROP" Hammer   Michael Horgan
      • [TheForge] "DROP" Hammer   Dan Scheid
      • GWW was RE: [TheForge] "DROP" Hammer   Michael Horgan
      • GWW was RE: [TheForge] "DROP" Hammer   Ries Niemi
• [TheForge] "DROP" Hammer - Question   Bruce Freeman
  • [TheForge] "DROP" Hammer - Question   Michael Horgan
  • [TheForge] "DROP" Hammer - Bounce vs. dead drop   mrscherm at aol.com
• [TheForge] "DROP" Hammer - Bounce vs. dead drop   Bruce Freeman
• Making Threads, was RE: [TheForge] Re: Vice repair   Jeff P.
• [TheForge] Re: [kl] Chuck Robinison   Chuck Robinson
  • [TheForge] Re: [kl] Chuck Robinison   Ralph Sproul
• [TheForge] Identifying metals   Jonathan Nedbor
• [TheForge] Identifying metals   Hochewa at aol.com
• [TheForge] Identifying metals   Bruce Freeman
  • [TheForge] Identifying metals   Clyde
    • [TheForge] Contact info   Rick Korinek
• [TheForge] Seattle area smiths   Phlip
  • [TheForge] Seattle area smiths   Ries Niemi
    • [TheForge] Seattle area smiths   Phlip
• [TheForge] Fw: To Phlip re unusual Viking Sword from Danube/Eastern Europe   Phlip
• [TheForge] Mystery Metal   Jonathan Nedbor
  • [TheForge] Mystery Metal   Justin Fellenz
    • [TheForge] Mystery Metal   Ralph Sproul
  • [TheForge] Mystery Metal   Paul Sperbeck
  • [TheForge] Mystery Metal   Ralph Sproul
• [TheForge] Mystery Metal   Bruce Freeman
• [TheForge] Wire Cloth   Hufford, David
• [TheForge] Wire Cloth   Roy Wilson
• [TheForge] Re: TheForge Digest, Vol 21, Issue 12   LrdThorolf at aol.com
  • [TheForge] Re: TheForge Digest, Vol 21, Issue 12   John Husvar
• [TheForge] Input wanted   Chris Kilpatrick
  • [TheForge] Input wanted   Phlip
• [TheForge] Input wanted (more)   Chris Kilpatrick
  • [TheForge] Input wanted (more)   Phlip
• [TheForge] Chris Worsley   Phil
• [TheForge] Input wanted   Chris Kilpatrick
  • [TheForge] Input wanted   Justin Fellenz
• [TheForge] Input wanted   Chris Kilpatrick
  • [TheForge] Input wanted   Justin Fellenz
  • [TheForge] Input wanted   Daniel Crowther
• [TheForge] Input wanted   Chris Kilpatrick
  • [TheForge] Input wanted   Daniel Crowther
    • [TheForge] Source for copper or brass wire brushes   Jerry Smith
      • [TheForge] Source for copper or brass wire brushes   The Wilson's
      • [TheForge] Source for copper or brass wire brushes   Mike Linn
      • [TheForge] Source for copper or brass wire brushes   Jerry Smith
      • [TheForge] Source for copper or brass wire brushes   Peter Fels And Phoebe Palmer
      • [TheForge] Source for copper or brass wire brushes   Justin Fisher
      • [TheForge] Source for copper or brass wire brushes   Steve Smith
  • HALP !!! Re: [TheForge] Input wanted   Phlip
    • HALP !!! Re: [TheForge] Input wanted   Daniel Kretchmar
• HALP !!! Re: [TheForge] Input wanted   Phlip
• [TheForge] Baskets   ductility at juno.com
  • [TheForge] Baskets   Ries Niemi
    • [TheForge] Baskets   Rick Korinek
• [TheForge] Re: bridge crane   Jeffrey Polaski
  • [TheForge] Re: bridge crane   Rick Korinek
  • [TheForge] Re: bridge crane   Ralph Sproul
    • [TheForge] Re: bridge crane   Dave Mudge
      • [TheForge] Re: bridge crane   Jerry Frost
• [TheForge] Source for copper or brass wire brushes   Bruce Freeman
• [TheForge] Baskets   Bruce Freeman
• [TheForge] Re: Baskets   Bob Ehrenberger
• [TheForge] Re: bridge crane   Jeffrey Polaski
• [TheForge] Re: bridge crane   Chris Kilpatrick
  • [TheForge] Re: bridge crane   Justin Fellenz
• [TheForge] Show Canopy   Mike Linn
  • [TheForge] Re:Tannehill   Dan Tull
    • [TheForge] Re:Tannehill   Dan Tull
• [TheForge] Pretty useful publications   Steve Smith
  • [TheForge] Pretty useful publications   Phlip
    • [TheForge] Pretty useful publications   Steve Smith
      • [TheForge] Pretty useful publications   Jerry Smith
      • [TheForge] Pretty useful publications   Peter Fels And Phoebe Palmer
      • [TheForge] toys how many?   Dan Scheid
      • [TheForge] toys how many?   Jerry Frost
      • [TheForge] toys how many?   Dan Scheid
      • [TheForge] toys how many?   Jerry Frost
      • [TheForge] toys how many?   Dan Scheid
      • [TheForge] steel scrap   Gladish Family
      • [TheForge] steel scrap   Roger Olsen
      • [TheForge] steel scrap   Peter Fels And Phoebe Palmer
      • [TheForge] steel scrap   Jerry Frost
      • [TheForge] steel scrap   Peter Fels And Phoebe Palmer
      • [TheForge] steel scrap   Jerry Frost
      • [TheForge] steel scrap   Peter Fels And Phoebe Palmer
      • [TheForge] steel scrap   Jerry Frost
      • [TheForge] steel scrap   mrscherm at aol.com
      • [TheForge] toys how many?   Jerry Frost
      • [TheForge] toys how many?   Ralph Sproul
      • [TheForge] toys how many?   Jerry Frost
• [TheForge] Air hammer anvil height   Woolley
  • [TheForge] Air hammer anvil height   Peter Fels And Phoebe Palmer
    • [TheForge] Air hammer anvil height   Ries Niemi
  • [TheForge] Re: Air hammer anvil height   Mike Spencer
    • [TheForge] Re: Air hammer anvil height   Peter Fels And Phoebe Palmer
      • [TheForge] Re: Air hammer anvil height   Ries Niemi
  • [TheForge] Air hammer anvil height   Jerry Frost
    • [TheForge] berillium check   Peter Fels And Phoebe Palmer
• [TheForge] Hammer Height   Jonathan Nedbor
  • [TheForge] Hammer Height   Ralph Sproul
    • [TheForge] Hammer Height   Woolley
• [TheForge] Greetings Phlip   Grover Richardson
• [TheForge] toys how many?   Bob Ehrenberger
• RE; [TheForge] Air hammer anvil height   Bob Ehrenberger
• [TheForge] steel scrap   Bruce Freeman
  • [TheForge] steel scrap   Ries Niemi
  • [TheForge] steel scrap   mrscherm at aol.com
    • [TheForge] steel scrap   Jerry Frost
      • [TheForge] Just had to pass this on.   GHS
      • [TheForge] Just had to pass this on.   Peter Fels And Phoebe Palmer
      • [TheForge] Just had to pass this on; now Solid Platinum Anvil   mrscherm at aol.com
      • [TheForge] Re: Just had to pass this on; now Solid Platinum Anvil   Mike Spencer
      • [TheForge] Re: Just had to pass this on; now Solid Platinum Anvil   Grant Marcoux
• [TheForge] Just had to pass this on.   Bruce Freeman
• [TheForge] Just had to pass this on; now Solid Platinum Anvil   Chris Kilpatrick
• [TheForge] Just had to pass this on; now Solid Platinum Anvil   Chris Kilpatrick
  • [TheForge] YAK Solid Platinum Anvil and Dan Brown   mrscherm at aol.com
• [TheForge] Jerry Smith   kim george
• [TheForge] YAK Solid Platinum Anvil and Dan Brown   Hochewa at aol.com
  • [TheForge] YAK Solid Platinum Anvil and Dan Brown   James Binnion
• [TheForge] YAK Solid Platinum Anvil and Dan Brown   Hochewa at aol.com
• [TheForge] andiron bar replacement   PlumDon at aol.com
  • [TheForge] andiron bar replacement   Jerry Frost
    • [TheForge] andiron bar replacement   Jay Hayes
  • [TheForge] Re: andiron bar replacement   Mike Spencer
  • [TheForge] andiron bar replacement   Dan Tull
  • [TheForge] andiron bar replacement   JOHN CHOBRDA
  • [TheForge] andiron bar replacement   James Binnion
  • [TheForge] andiron bar replacement   Peter Fels And Phoebe Palmer
• [TheForge] andiron bar replacement   PlumDon at aol.com
  • [TheForge] andiron bar replacement   James Binnion
• [TheForge] andiron bar replacement   Bruce Freeman
• [TheForge] S1 Heat Treating   Ed F
  • [TheForge] S1 Heat Treating   Grant Marcoux
• [TheForge] Fw: Ancient metallurgy article...   Phlip
  • [TheForge] Fw: Ancient metallurgy article...   Daniel Crowther
    • [TheForge] Fw: Ancient metallurgy article...   Phlip
  • [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   mrscherm at aol.com
• [TheForge] andiron bar replacement   PlumDon at aol.com
  • [TheForge] andiron bar replacement   Jay Hayes
    • [TheForge] andiron bar replacement   Rick Korinek
• [TheForge] berillium check   Hochewa at aol.com
  • [TheForge] berillium check   Darrell
    • [TheForge] berillium check   Peter Fels And Phoebe Palmer
      • [TheForge] berillium check   Phlip
      • [TheForge] berillium check   Phlip
      • [TheForge] berillium check   Ries Niemi
      • [TheForge] berillium check   Gladish Family
• [TheForge] S1 Heat Treating   bamablacksmith at comcast.net
• [TheForge] Fw: Ancient metallurgy article...   PlumDon at aol.com
• [TheForge] Baskets   ductility at juno.com
  • [TheForge] Re: Baskets   Mike Spencer
  • [TheForge] Baskets   Rick
• [TheForge] berillium check   Bruce Freeman
  • [TheForge] Re: berillium check   Mike Spencer
• [TheForge] Baskets   ductility at juno.com
• [TheForge] Test mail   Stephen Viola
  • [TheForge] Test mail   Jerry Frost
  • [TheForge] Moving big stuff across country   Mike Spencer
  • [TheForge] Re: Test mail   Mike Spencer
    • [TheForge] Re: Test mail   Stephen Viola
      • [TheForge] Re: Test mail   Rick
      • [TheForge] Re: Test mail   Ries Niemi
      • [TheForge] Re: Test mail   Jerry Frost
      • [TheForge] Re: Test mail   Stephen Viola
      • [TheForge] Re: Test mail   schade at acegroup.cc
  • [TheForge] Test mail   Jerry Frost
  • [TheForge] Test mail   Grant Marcoux
    • [TheForge] Q&A   Ron Childers
      • [TheForge] Q&A   Stephen Viola
      • [TheForge] Q&A   Rob Fertner
      • [TheForge] Q&A   Stephen Viola
      • [TheForge] Q&A   schade at acegroup.cc
      • [TheForge] Q&A   Ries Niemi
• [TheForge] Fw: [Aoife-Links] More Power! Medieval Machinery   Phlip
• [TheForge] Re: Test mail   Bruce Freeman
  • [TheForge] Re: Test mail   Ron Childers
    • Aussie smith in Finland- was Re: [TheForge] Re: Test mail   Phlip
    • [TheForge] Re: Test mail   Chuck Robinson
  • [TheForge] Re: Test mail   schade at acegroup.cc
    • [TheForge] Bealer's mistakes?   Jerry Frost
      • [TheForge] Bealer's mistakes?   Phlip
      • [TheForge] Bealer's mistakes?   Steve Smith
      • [TheForge] Bealer's mistakes?   Dan Tull
      • [TheForge] Bealer's mistakes?   schade at acegroup.cc
• [TheForge] welding spring steel   Wayne
  • [TheForge] welding spring steel   Ron Childers
    • [TheForge] welding spring steel   Dan Tull
• [TheForge] Beginning Books (was Mail Test)   Sean
  • [TheForge] Beginning Books (was Mail Test)   Stephen Viola
  • [TheForge] Top Three?   Kenny O.
    • [TheForge] Top Three?   Albin Drzewianowski
• [TheForge] re: welding spring steel   S. Pohlman
• [TheForge] They finally got it right   Bob Ehrenberger
  • [TheForge] They finally got it right   Larry and Pat Brown
  • [TheForge] They finally got it right   Bob Willman
• [TheForge] BlackSmith's Creed ?   Sean
  • [TheForge] BlackSmith's Creed ?   Roger Olsen
  • SPAM [TheForge] BlackSmith's Creed ?   Roger Olsen
    • SPAM [TheForge] BlackSmith's Creed ?   Robert Oppenheimer
      • SPAM [TheForge] BlackSmith's Creed ?   Jerry Frost
      • SPAM [TheForge] BlackSmith's Creed ?   Oppie
• [TheForge] Top Three?   Chris Kilpatrick
• [TheForge] Books etc.   jonned at hvc.rr.com
  • [TheForge] Re: Books etc.   Dann Johnson
    • [TheForge] Re: Books etc.   schade at acegroup.cc
  • [TheForge] Books etc.   Jerry Frost
    • [TheForge] Books etc.   Stephen Viola
      • [TheForge] Books etc.   Roger R Degner
      • [TheForge] Books etc.   Jerry Frost
      • [TheForge] Books etc.   Robert Morris
      • [TheForge] Books etc.   Ron Childers
    • [TheForge] Books etc.   schade at acegroup.cc
      • [TheForge] Books etc.   Stephen Viola
      • [TheForge] Books etc.   Jerry Frost
• [TheForge] re top three   TOOL GYPSY
• [TheForge] Re: Test mail - metric imperial   Larry Brown
• [TheForge] "Gichner Meet"   Larry Brown
  • [TheForge] "Gichner Meet"   Albin Drzewianowski
    • [TheForge] "Gichner Meet"   Albin Drzewianowski
• [TheForge] Blacksmith reading list   Stephen Viola
  • [TheForge] Blacksmith reading list   Wayne
  • [TheForge] Blacksmith reading list   Chuck Robinson
    • [TheForge] Blacksmith reading list   Dave Mudge
      • [TheForge] Blacksmith reading list   Chuck Robinson
      • [TheForge] Blacksmith reading list   Stephen Viola
      • [TheForge] Blacksmith reading list   Ralph Sproul
    • [TheForge] Blacksmith reading list   Dave Mudge
  • [TheForge] Blacksmith reading list   Mike Linn
    • [TheForge] Blacksmith reading list   Jerry Frost
      • [TheForge] Blacksmith reading list   Mike Linn
      • [TheForge] Blacksmith reading list   Stephen Viola
      • [TheForge] Blacksmith reading list   Jerry Frost
• [TheForge] OT- Check your hand-eye coordination ;-)   Phlip
  • [TheForge] OT- Check your hand-eye coordination ;-)   Darrell
• [TheForge] Re: Books etc.   brhlbsmt at mcttelecom.com
• [TheForge] Blacksmith reading list   brhlbsmt at mcttelecom.com
• [TheForge] Blacksmith reading list   brhlbsmt at mcttelecom.com
• [TheForge] Blacksmith reading list   Mike Linn
  • [TheForge] POOO!   Jerry Frost
    • [TheForge] POOO!   Ralph Sproul
      • [TheForge] POOO!   Mark A. Pesetsky
      • [TheForge] POOO!   Stephen Viola
    • [TheForge] Re: OT POOO!   Dann Johnson
    • [TheForge] POOO!   marc at ironringforge.com
• [TheForge] Re: Test mail   Bruce Freeman
• [TheForge] request for suggestions   terry l. ridder
  • [TheForge] request for suggestions   marc at ironringforge.com
  • [TheForge] request for suggestions   schade at acegroup.cc
    • [TheForge] request for suggestions   Larry Ruebush
    • [TheForge] request for suggestions   terry l. ridder
      • [TheForge] request for suggestions   schade at acegroup.cc
      • [TheForge] request for suggestions   Stephen Viola
      • [TheForge] request for suggestions   terry l. ridder
      • [TheForge] request for suggestions   Stephen Viola
    • [TheForge] request for suggestions   Larry Ruebush
  • [TheForge] request for suggestions   Dick Snow
• [TheForge] Top Three?   Bruce Freeman
• [TheForge] Books etc.   Bruce Freeman
  • [TheForge] Books etc.   Stephen Viola
• [TheForge] Opinions on Blacksmith reading list   Bruce Freeman
  • [TheForge] Opinions on Blacksmith reading list   Dan Tull
• SPAM [TheForge] BlackSmith's Creed ?   Jeffrey Polaski
• [TheForge] Fw: Ancient metallurgy article...   Bruce Freeman
• [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Bruce Freeman
  • [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Rowland Smuck
    • [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   mrscherm at aol.com
  • [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   mrscherm at aol.com
• [TheForge] request for suggestions - Printing   codpilot at bellsouth.net
  • [TheForge] request for suggestions - Printing   Clyde
• [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Bruce Freeman
• [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Bruce Freeman
• [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Bruce Freeman
  • [TheForge] Fw: Ancient metallurgy - US Bicentennial Bloom   Stephen Viola
• [TheForge] Books Books Books   Sean
  • [TheForge] food-safe finishes   Steven.Walker at its.state.ms.us
    • [TheForge] food-safe finishes   Mike Linn
      • [TheForge] food-safe finishes   Daniel Crowther
• [TheForge] request for suggestions   Bob Ehrenberger
• [TheForge] request for suggestions   Bob Ehrenberger
• [TheForge] Williamsburg   PlumDon at aol.com
• [TheForge] request for suggestions   Chris Kilpatrick
  • [TheForge] request for suggestions   terry l. ridder
    • [TheForge] request for suggestions   Doug Ayen
      • [TheForge] request for suggestions   Mike Linn
• [TheForge] Non-Toxic Finish   Jonathan Nedbor

Last message date: Mon Oct 31 23:58:37 EST 2005
Archived on: Tue Nov 1 02:40:52 EST 2005

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...