January 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jan 1 02:21:37 EST 2013
Ending: Thu Jan 31 22:36:53 EST 2013
Messages: 1437

• [Elecraft] [KX3]2M Module   Robert Vargas (KP4Y)
• [Elecraft] Use K3/0 in another room in my QTH?   Robert Vargas (KP4Y)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] RX IQ sound card problems KX3   Peter Eijlander (PA0PJE)
• [Elecraft] K3 Remote VFO tuning control   Poul Erik Karlshøj (PKA)
• [Elecraft] (OT) HRD Remote Server on WIN7   Poul Erik Karlshøj (PKA)
• [Elecraft] Use K3/0 in another room in my QTH?   Poul Erik Karlshøj (PKA)
• [Elecraft] Humidity and corrosion reducers   Doug Faunt N6TQS +1-510-717-1197
• [Elecraft] My in-progress K1 is ALIVE!!!   Stan AE7UT
• [Elecraft] KPA-500 construction problem/question   AG0N-3055
• [Elecraft] KPA500 Firmware loading VERY long   AG0N-3055
• [Elecraft] KPA500 Firmware loading VERY long   AG0N-3055
• [Elecraft] KPA500 Firmware loading VERY long   AG0N-3055
• [Elecraft] KPA500 Firmware loading VERY long   AG0N-3055
• [Elecraft] [KPA500] Hole in front panel?   AG0N-3055
• [Elecraft] [KPA500] Hole in front panel?   AG0N-3055
• [Elecraft] Post to the group   AG0N-3055
• [Elecraft] Post to the group   AG0N-3055
• [Elecraft] Lee's HiJack Mail   AG0N-3055
• [Elecraft] [OT} Whole House Surge Protection   AG0N-3055
• [Elecraft] [K3] Operating Temperature Range   Rick Miller - AI1V
• [Elecraft] [KX3] KX3 BETA firmware release (rev 1.34) -- Digital Voice Recorder (DVR)   Christian AK4VV
• [Elecraft] Is the K3 a "fun" radio to operate ?   Michael Adams
• [Elecraft] K3 or KX3 on my sailing yacht?   Michael Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] RX IQ sound card problems KX3   W9TTW Tabb Adams
• [Elecraft] K3; Main menu and Config menu settings   Tommy Alderman
• [Elecraft] K3/100 into DX-CC antenna (HI-SWR)   Brian Alsop
• [Elecraft] [K2] Inductivity of Toroids   Brian Alsop
• [Elecraft] KPA-500 band data input   Brian Alsop
• [Elecraft] KPA-500 band data input   Brian Alsop
• [Elecraft] Odd subrx problem   Brian Alsop
• [Elecraft] KPA500 RFI problem   Brian Alsop
• [Elecraft] KPA500 RFI problem   Brian Alsop
• [Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80   Brian Alsop
• [Elecraft] Is the K3 a "fun" radio to operate ?   Brian Alsop
• [Elecraft] K3 Receiver   Brian Alsop
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   Brian Alsop
• [Elecraft] W1 wanted   Brian Alsop
• [Elecraft] Broadcast band interference [KX3}]   Gary Auchard
• [Elecraft] Elecraft Digest, Vol 104, Issue 47   KR9A BILL
• [Elecraft] (no subject)   JULIAN BRADBERRY
• [Elecraft] 472KHz transverter for KX3   Dominic Baines
• [Elecraft] 472KHz transverter for KX3   Dominic Baines
• [Elecraft] 472KHz transverter for KX3   Dominic Baines
• [Elecraft] 472KHz transverter for KX3   Dominic Baines
• [Elecraft] 472KHz transverter for KX3   Dominic Baines
• [Elecraft] WTB: K3   Robert Bajuk
• [Elecraft] OT: Receive noise / ground - NO NOISE   Eugene Balinski
• [Elecraft] K3 or KX3 on my sailing yacht?   Eugene Balinski
• [Elecraft] XG3 Extended Range (lower)   Eugene Balinski
• [Elecraft] K3 suggestion   Nate Bargmann
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Nate Bargmann
• [Elecraft] K3 Remote VFO tuning control   Nate Bargmann
• [Elecraft] Is the K3 a "fun" radio to operate ?   Nate Bargmann
• [Elecraft] The Old Days   Nate Bargmann
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Barry
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Barry
• [Elecraft] K3 suggestion   Barry
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Barry
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Barry
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Erik Basilier
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] KPA500 RFI problem   Rick Bates
• [Elecraft] KPA500 RFI problem   Rick Bates
• [Elecraft] PSK31 on K3/100   Rick Bates
• [Elecraft] KPA500 RFI problem   Rick Bates
• [Elecraft] K3 and HRD   Rick Bates
• [Elecraft] YALB   Rick Bates
• [Elecraft] K3 - DATA mode does not TX   Rick Bates
• [Elecraft] KAT500 Performance Clarification   Rick Bates
• [Elecraft] KX# power supply   Peter E. Beedlow
• [Elecraft] K3 ProSet Mic Adaptor   Bruce Beford
• [Elecraft] KX3 Power Cord   Bruce Beford
• [Elecraft] Is the K3 a "fun" radio to operate ?   Bruce Beford
• [Elecraft] P3 firmware updated fine   Bruce Beford
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Bruce Beford
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Bruce Beford
• [Elecraft] K3 RF Power Meter Accuracy   Jim Bennett
• [Elecraft] KX3 Mobile installation   Jack Berry
• [Elecraft] K3_EZ future??   Jack Berry
• [Elecraft] K3_EZ future??   Jack Berry
• [Elecraft] Weak signal DXing on 2 meters   W0WFH Bill
• [Elecraft] Pignology Pigtail For Sale   Joel Black
• [Elecraft] [KX3]2M Module   Alan Bloom
• [Elecraft] P3 MKR Operation is jumpy / baud rate   Alan Bloom
• [Elecraft] K3 and Heath SB-610   Alan Bloom
• [Elecraft] ESSB Equalization   Alan Bloom
• [Elecraft] I wish Elecraft would make this radio   Jeffrey Blumenfeld
• [Elecraft] Surge Protection   Bob
• [Elecraft] Is the K3 a "fun" radio to operate ?   Bob
• [Elecraft] K3 XV50 transverter question   KD7YZ Bob
• [Elecraft] K3 , XV144, XV432 for Satellite work?   KD7YZ Bob
• [Elecraft] Odd transverter bugaboo agian   KD7YZ Bob
• [Elecraft] Odd transverter bugaboo agian   KD7YZ Bob
• [Elecraft] Odd transverter bugaboo agian --solved   KD7YZ Bob
• [Elecraft] K3 Receiver   Larry Boekeloo
• [Elecraft] K3 Receiver Fade - Update   Larry Boekeloo
• [Elecraft] message no 3 VFO troubles   Hans Elfelt Bonnesen
• [Elecraft] K3 RF Gain Contol   Dale Boresz
• [Elecraft] Using monitor on K3   Dale Boresz
• [Elecraft] I am confused… or maybe its just a brain fart...   Dale Boresz
• [Elecraft] {K3} Amp Interface   Tom Boucher
• [Elecraft] {K3} Amp Interface   Tom Boucher
• [Elecraft] RemoteRig question   Hugh Bradley
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Buddy Brannan
• [Elecraft] P3 MKR Operation is jumpy / baud rate   Allen R. Brier
• [Elecraft] KPA-500 band data input   Jack Brindle
• [Elecraft] Measuring Inductors (was Re: [K2] Inductivity of Toroids)   Jim Brown
• [Elecraft] Measuring Inductors (was Re: [K2] Inductivity of Toroids)   Jim Brown
• [Elecraft] K3-JT65   Jim Brown
• [Elecraft] KPA500 RFI problem   Jim Brown
• [Elecraft] Broadcast band interference   Jim Brown
• [Elecraft] Surge Protection   Jim Brown
• [Elecraft] Is the K3 a "fun" radio to operate ?   Jim Brown
• [Elecraft] Is the K3 a "fun" radio to operate ?   Jim Brown
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Jim Brown
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Jim Brown
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Jim Brown
• [Elecraft] KPA500 240V wiring   Jim Brown
• [Elecraft] Using KAT500 With Antenna Switch   Jim Brown
• [Elecraft] 903 or 1296 Mhz Transverter   Jim Brown
• [Elecraft] The Old Days   Jim Brown
• [Elecraft] K3 Key Clicks   Jim Brown
• [Elecraft] 903 or 1296 Mhz Transverter   Jim Brown
• [Elecraft] Is the K3 a "fun" radio to operate ?   Ted Bryant
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Eric Buggee
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Eric Buggee
• [Elecraft] Elecraft hey   Lee Buller
• [Elecraft] Lee's HiJack Mail   Lee Buller
• [Elecraft] Info: Yahoo Hacked   Lee Buller
• [Elecraft] KX3 BETA firmware release (rev 1.34) -- Digital Voice Recorder (DVR)   Wayne Burdick
• [Elecraft] [KX3]2M Module   Wayne Burdick
• [Elecraft] KX3 EXTENDED VFO TEMPERATURE COMPENSATION PROCEDURE   Wayne Burdick
• [Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80   Wayne Burdick
• [Elecraft] Is the K3 a "fun" radio to operate ?   Wayne Burdick
• [Elecraft] KX3 Beta 1.36 Additional Instructions?   Wayne Burdick
• [Elecraft] KX3 NR   Wayne Burdick
• [Elecraft] KX3 NR   Wayne Burdick
• [Elecraft] KX3 NR   Wayne Burdick
• [Elecraft] KX3 NR   Wayne Burdick
• [Elecraft] KX3 AGC *PLS   Wayne Burdick
• [Elecraft] Post to the group   Wayne Burdick
• [Elecraft] KXBC3 charging   Don Butler
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Donald Butler
• [Elecraft] hi   WILLIS COOKE
• [Elecraft] K3 questioin   Jorge Diez CX6VM
• [Elecraft] [K3] AM-S VFO Tracking   Pierfrancesco Caci
• [Elecraft] OT-P3 capture of a 17M intruder   Pierfrancesco Caci
• [Elecraft] K3 S-Meter   Pierfrancesco Caci
• [Elecraft] K3 S-Meter   Pierfrancesco Caci
• [Elecraft] K3 Receiver   Pierfrancesco Caci
• [Elecraft] KX3 Switching Time   Fred Carvalho
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ken Chandler
• [Elecraft] K2 with options for sale   Len Chesler
• [Elecraft] Broadcast band interference   Tom H Childers
• [Elecraft] [k3] BAT LOW   Tom H Childers
• [Elecraft] [k3] BAT LOW   Tom H Childers
• [Elecraft] [k3] BAT LOW   Tom H Childers
• [Elecraft] P3 Freeze.   Tom H Childers
• [Elecraft] KAT500 problem   Tom H Childers
• [Elecraft] OT-P3 capture of a 17M intruder   Tom H Childers
• [Elecraft] OT-P3 capture of a 17M intruder   Tom H Childers
• [Elecraft] P3   Tom H Childers
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Tom H Childers
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Tom H Childers
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Tom H Childers
• [Elecraft] K3 or KX3 on my sailing yacht?   Tom H Childers
• [Elecraft] K3 or KX3 on my sailing yacht?   Tom H Childers
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Tom H Childers
• [Elecraft] K3 Receiver   Tom H Childers
• [Elecraft] Using KAT500 With Antenna Switch   Tom H Childers
• [Elecraft] [KAT500] Auto Tuning   Tom H Childers
• [Elecraft] Post to the group   Tom H Childers
• [Elecraft] Nickel Zinc Batteries   David Christ
• [Elecraft] Broadcast band interference [KX3}]   David Christ
• [Elecraft] K3- simplified remote tuning knob   David Christ
• [Elecraft] Edgeport [was: COM port not working]   David Christ
• [Elecraft] OT: High RF currents in small TX'ing lopps   Kenneth A Christiansen
• [Elecraft] OT: High RF currents in small TX'ing loops   Kenneth A Christiansen
• [Elecraft] K3 won't shut off?   Ron D'Eau Claire
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Ron D'Eau Claire
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ron D'Eau Claire
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ron D'Eau Claire
• [Elecraft] What CW Filters do others have   Ron D'Eau Claire
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ron D'Eau Claire
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ron D'Eau Claire
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ron D'Eau Claire
• [Elecraft] K3 RF Power Meter Accuracy   Ron D'Eau Claire
• [Elecraft] [KPA500] Hole in front panel?   Ron D'Eau Claire
• [Elecraft] [K3] Line Out level   Ron D'Eau Claire
• [Elecraft] KX3 Whip Antenna   Ron D'Eau Claire
• [Elecraft] New Output Power Issue   Ron D'Eau Claire
• [Elecraft] KX3 Battery Holder and Batter Removal   Ron D'Eau Claire
• [Elecraft] KX3 Kit Builder Alert #1: Battery holder attachment screws   Ron D'Eau Claire
• [Elecraft] K3 or KX3 on my sailing yacht?   Ron D'Eau Claire
• [Elecraft] [K3] Ref Cal failed   Ron D'Eau Claire
• [Elecraft] KXBC3 charging   Ron D'Eau Claire
• [Elecraft] [KAT500] Auto Tuning   Ron D'Eau Claire
• [Elecraft] {OT} - On the subject of "best" portable antennas   Ron D'Eau Claire
• [Elecraft] The Old Days   Ron D'Eau Claire
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3 Remote VFO tuning control   Bill Clarke
• [Elecraft] K3- simplified remote tuning knob   Bill Clarke
• [Elecraft] COM port not working   Bill Clarke
• [Elecraft] [KAT500] Auto Tuning   Bill Clarke
• [Elecraft] Post to the group   Bill Clarke
• [Elecraft] K3 RF Power Meter Accuracy   Edward R Cole
• [Elecraft] Dayton 2013   Edward R Cole
• [Elecraft] Is the K3 a "fun" radio to operate ?   Edward R Cole
• [Elecraft] [KAT500] more antennas   Edward R Cole
• [Elecraft] K3 630m-band   Edward R Cole
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Edward R Cole
• [Elecraft] K3 2 M solid state amps   Edward R Cole
• [Elecraft] Elecraft] K3 LONG delay in TX after TXINH removed (solved)   Edward R Cole
• [Elecraft] Post to the group   Edward R Cole
• [Elecraft] modified diagram for K3 Inhibit Control   Edward R Cole
• [Elecraft] 903 or 1296 Mhz Transverter   Edward R Cole
• [Elecraft] [Bulk] K2 Fault History?   Bill Coleman
• [Elecraft] [K3] Another K3 (SN 7071) on the air!   Bill Coleman
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] KPA500/KAT500 Delivery Anxiety   Ray Coles
• [Elecraft] PSK31 on K3/100   Ray Coles
• [Elecraft] KPA 100 T2 Winding Problem   Ray Collins
• [Elecraft] P3   David and Dianne on Comcast
• [Elecraft] K3_EZ Download Availability?   David and Dianne on Comcast
• [Elecraft] K3_EZ Download Availability   David and Dianne on Comcast
• [Elecraft] How do I print a spectrogram file?   Rick Commo
• [Elecraft] How do I print a spectrogram file?   Rick Commo
• [Elecraft] PIN for K3??   Bill Conkling
• [Elecraft] PIN for K3??   Bill Conkling
• [Elecraft] PIN for K3??   Bill Conkling
• [Elecraft] [K2] question about crystal filters and DSP audio filter settings   Kevin Crossett
• [Elecraft] K3 Remote VFO tuning control   David Cutter
• [Elecraft] Broadcast band interference   David Cutter
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   David Cutter
• [Elecraft] Best Portable Antenna   David Cutter
• [Elecraft] [XV432} LO Instability Problem   John D'Ausilio
• [Elecraft] Remote power on for k3/0 via remote rig or other   Mitch Wolfson DJØQN
• [Elecraft] Use K3/0 in another room in my QTH?   Win Kriegl DK9IP/KH7CD
• [Elecraft] K3 S-Meter   DL5OCD
• [Elecraft] K3 S-Meter   DL5OCD
• [Elecraft] K3 S-Meter   DL5OCD
• [Elecraft] K3 Sub Receiver Problems   DR
• [Elecraft] K3 Sub Receiver Problems   DR
• [Elecraft] WTB: K3 Arizona   ALAN Daggett
• [Elecraft] K3 or KX3 on my sailing yacht?   Dave
• [Elecraft] Low Power on K2   DaveVK
• [Elecraft] KX3 Smarter Charger   Alan Davenport
• [Elecraft] OT-P3 capture of a 17M intruder   David Ferrington, M0XDF
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Charlie Delta
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Charlie Delta
• [Elecraft] KX3 Whip Antenna   Chris Derr
• [Elecraft] Milliwatt output from KX3   Chris Derr
• [Elecraft] KX3 Kit Builder Alert #1: Battery holder attachment screws   Rick Dettinger
• [Elecraft] Builder's Alert #1 KX3 Battery Holder screw length   Rick Dettinger
• [Elecraft] Test…Disregard   David Dietrich
• [Elecraft] KXV3A Utility Program 1 milliwatt calibration failure   Dick Dievendorff
• [Elecraft] K3 Frequency Memory Editor 1.3.3.0 available   Dick Dievendorff
• [Elecraft] [KAT500] KPA500 firmware upgrade needed?   Dick Dievendorff
• [Elecraft] KAT500 Performance Clarification   Dick Dievendorff
• [Elecraft] BAND CODE OUTPUT CHANGE   Dick Dievendorff
• [Elecraft] Using KAT500 With Antenna Switch   Dick Dievendorff
• [Elecraft] K3 and Heath SB-610   Jan Ditzian
• [Elecraft] KX3 and KPA500 ... full power out?   Terry Domae
• [Elecraft] KAT500 problem   Geoffrey Downs
• [Elecraft] [KX3] - KXFL3   Geoffrey Downs
• [Elecraft] [KX3] - KXFL3   Geoffrey Downs
• [Elecraft] Humidity and corrosion reducers   Dr. William J. Schmidt, II
• [Elecraft] K3 won't shut off?   Dr. William J. Schmidt, II
• [Elecraft] K3 won't shut off?   Dr. William J. Schmidt, II
• [Elecraft] K3 won't shut off, turns on by itself   Dr. William J. Schmidt, II
• [Elecraft] K3 suggestion   Dr. William J. Schmidt, II
• [Elecraft] K3 Remote VFO tuning control   Dr. William J. Schmidt, II
• [Elecraft] K3 Remote VFO tuning control   Dr. William J. Schmidt, II
• [Elecraft] Is the K3 a "fun" radio to operate ?   Dr. William J. Schmidt, II
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Dr. William J. Schmidt, II
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Dr. William J. Schmidt, II
• [Elecraft] KPA500 Firmware loading VERY long   Nicolas Drin
• [Elecraft] KPA500 Firmware loading VERY long   Nicolas Drin
• [Elecraft] KPA500 Help - After 2 weeks : still no able to load firmware   Nicolas Drin
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   "Hjalmar Duklæt"
• [Elecraft] My in-progress K1 is ALIVE!!!   "Hjalmar Duklæt"
• [Elecraft] DVK question   Scott Dunlavey
• [Elecraft] P3   Scott Dunlavey
• [Elecraft] P3   Scott Dunlavey
• [Elecraft] P3   Scott Dunlavey
• [Elecraft] used P3   Scott Dunlavey
• [Elecraft] WTB used P3   Scott Dunlavey
• [Elecraft] used P3   Scott Dunlavey
• [Elecraft] PIN for K3??   Scott Dunlavey
• [Elecraft] PIN for K3??   Scott Dunlavey
• [Elecraft] CW Touch Keyer   David Dunn
• [Elecraft] P3 Firmware Checksum failure   Paul M Dunphy
• [Elecraft] P3 Firmware Checksum failure - Supplemental   Paul M Dunphy
• [Elecraft] P3 Firmware Checksum failure - Supplemental   Paul M Dunphy
• [Elecraft] P3 Firmware problem - Update   Paul M Dunphy
• [Elecraft] P3 firmware problem - resolved   Paul M Dunphy
• [Elecraft] Lee's HiJack Mail   Paul M Dunphy
• [Elecraft] Would like to purchase a used K3 from a Non Smoking Shack, please e mail me WP4o at tampabay.rr.com   ED
• [Elecraft] K2/10 upgrade question   EdKo
• [Elecraft] ESSB Equalization   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] 2-meter solid-state linear amplifiers with K3   WW2R Elecraft
• [Elecraft] 472KHz transverter for KX3   WW2R Elecraft
• [Elecraft] Paddle for the KX3 - has anyone tried the Begali Adventure?   David Elliott
• [Elecraft] [KX3]2M Module   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KAT500s now shipping in 2-5 days after order   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3][P3] Using the P3 for SSTV   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Sub Receiver Problems   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] FW: MD's gotta go... :>)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT-P3 capture of a 17M intruder   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 S-Meter   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 1.23 f/w released   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] P3   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] (no subject)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KX3 with a KPA500   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KX3 builder's alert #1 released - IMPORTANT   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KXBC3 shipping status   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft hey   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] RX IQ sound card problems KX3   F5LCI
• [Elecraft] KBPF3's for Sale   Ray Fallen
• [Elecraft] K3; Main menu and Config menu settings   Randy Farmer
• [Elecraft] [K3] Integration and Increasing complexity   Randy Farmer
• [Elecraft] Broadcast band interference   Mel Farrer
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Mel Farrer
• [Elecraft] mmtty setup for k3   Richard Ferch
• [Elecraft] K3 Remote VFO tuning control   Richard Ferch
• [Elecraft] K3 - DATA mode does not TX   Richard Ferch
• [Elecraft] COM port not working   Richard Ferch
• [Elecraft] K3 will not go into XMIT with MMTTY.EXTFSK   Richard Ferch
• [Elecraft] P3 Freeze.   Tom Fitzpatrick
• [Elecraft] OT; HRD's Audio Monitor feature.   Richard Fjeld
• [Elecraft] OT-P3 capture of a 17M intruder   Richard Fjeld
• [Elecraft] K3 "fun" Programmable switch display possible?   Richard Fjeld
• [Elecraft] P3   Richard Fjeld
• [Elecraft] K3; Main menu and Config menu settings   Richard Fjeld
• [Elecraft] K3; using QuickMix software.   Richard Fjeld
• [Elecraft] K3; using QuickMix software.   Richard Fjeld
• [Elecraft] (ELECRAFT) K3 RECEIVER   Richard Fjeld
• [Elecraft] ESSB Equalization   Richard Fjeld
• [Elecraft] ESSB Equalization   Richard Fjeld
• [Elecraft] Post to the group   Richard Fjeld
• [Elecraft] K3; Digital Voice on HF   Richard Fjeld
• [Elecraft] K3 ESSB question - data modes   Richard Fjeld
• [Elecraft] K3; using 'freeDV' digital voice software   Richard Fjeld
• [Elecraft] K3; Main menu and Config menu settings   Mike Flowers
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Bill Frantz
• [Elecraft] K3 suggestion   Bill Frantz
• [Elecraft] KX3 digital   Bill Frantz
• [Elecraft] How do I print a spectrogram file?   Robert Friess
• [Elecraft] [KAT500] more antennas   Robert Friess
• [Elecraft] [XV432} LO Instability Problem   Robert Friess
• [Elecraft] KPA500 / KAT 500   Robert Friess
• [Elecraft] [KX3] 160-80 meter mod?   John Fritze
• [Elecraft] [KX3] 160/80 meter SMT mod   John Fritze
• [Elecraft] Where are firmware releases announced?   Hisashi T Fujinaka
• [Elecraft] mmtty setup for k3   Dr. Werner Furlan
• [Elecraft] [KX3]2M Module   Gil G.
• [Elecraft] [KX3] Received today and filter question..   Gil G.
• [Elecraft] [KX3] Received today and filter question..   Gil G.
• [Elecraft] end fed   Gil G.
• [Elecraft] New KX3 - a few observations, a bug report, and suggestion   Gil G.
• [Elecraft] [KX3] SSB problem, settings issue?   Gil G.
• [Elecraft] [KX3] SSB, figured it out!   Gil G.
• [Elecraft] [KX3] Firmware suggestions.   Gil G.
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Gil G.
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Gil G.
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Gil G.
• [Elecraft] KPA500 Power problems   Bob G3PJT
• [Elecraft] KPA500 Power problems   Bob G3PJT
• [Elecraft] [K3][P3] Using the P3 for SSTV   David G4DMP
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   David G4DMP
• [Elecraft] My in-progress K1 is ALIVE!!!   David G4DMP
• [Elecraft] Elecraft hey   David G4DMP
• [Elecraft] K3 suggestion   G4HUE
• [Elecraft] P3, VGA card - USB connectors   G4HUE
• [Elecraft] iSDR and KX3 problems   GDR
• [Elecraft] Post to the group   GDanner
• [Elecraft] [OT] KX3UI for Mac   Nick Garner
• [Elecraft] [OT] The New Pigtail, Piglet   Nick Garner
• [Elecraft] K3, MicroHam MKII and SteppIr SDA100 controller   John Gaynard
• [Elecraft] K3 with SteppIR SDA100 controller and MK II   John Gaynard
• [Elecraft] [KX3] Now that was fun!!!!!   George Winship, NC5G
• [Elecraft] [KX3] Now that was fun!!!!!   George Winship, NC5G
• [Elecraft] K3/0: Use of Heil Proset 4/AD1-K   Robert A Gerard
• [Elecraft] KX1 - anyone operate standing?   Bill Gerth
• [Elecraft] OT: Receive noise / ground - NO NOISE   David Gilbert
• [Elecraft] Elecraft could offer small built transceivers, in addition to its kits   David Gilbert
• [Elecraft] KPA500 RFI problem   David Gilbert
• [Elecraft] KPA500 RFI problem   David Gilbert
• [Elecraft] KPA500 RFI problem   David Gilbert
• [Elecraft] KPA500 RFI problem   David Gilbert
• [Elecraft] KPA500 RFI problem   David Gilbert
• [Elecraft] How do I print a spectrogram file?   David Gilbert
• [Elecraft] The Old Days   David Gilbert
• [Elecraft] [OT} Whole House Surge Protection   David Gilbert
• [Elecraft] KX3 Battery Charging Question   Richard Gillingham
• [Elecraft] Best Portable Antenna   Richard Gillingham
• [Elecraft] [K1} Filter Board Issue/ Rapid pulse receiver noise   Quinton Gleason
• [Elecraft] KX3 Charger KXBC3 and alternative power source.   Vk3ccr - Gmail
• [Elecraft] P3 Freeze.   Eduardo González
• [Elecraft] KAT500 what backlog?   Ron Gould
• [Elecraft] KX3 - CW problem   Klaus-Dieter Graef
• [Elecraft] Remote Rig questions   Philip Graitcer
• [Elecraft] K3 RTTY Delay on RX   W0SD Ed Gray
• [Elecraft] K3 RTTY Delay on RX   W0SD Ed Gray
• [Elecraft] K3 RTTY Delay on RX   W0SD Ed Gray
• [Elecraft] [XV432} LO Instability Problem   Ian Greenshields
• [Elecraft] [XV432} LO Instability Problem   Ian Greenshields
• [Elecraft] XMIT EQUALIZTION   Mike Greenway
• [Elecraft] DISREGARD XMIT EQUALIZATION   Mike Greenway
• [Elecraft] BAND CODE OUTPUT CHANGE   Mike Greenway
• [Elecraft] Radio sport headset   Greg
• [Elecraft] KAT500 problem   Greg
• [Elecraft] KAT500 problem   Greg
• [Elecraft] [KX3]2M Module   Gary Gregory
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Gary Gregory
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Gary Gregory
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Gary Gregory
• [Elecraft] KX3 POWER ON/OFF OPTION   Gary Gregory
• [Elecraft] Fun To Use   Gary Gregory
• [Elecraft] P3   Gary Gregory
• [Elecraft] P3   Gary Gregory
• [Elecraft] P3   Gary Gregory
• [Elecraft] KPA500: strange behaviour - any ideas?   Gary Gregory
• [Elecraft] K3; Main menu and Config menu settings   Gary Gregory
• [Elecraft] PIN for K3??   Gary Gregory
• [Elecraft] PIN for K3??   Gary Gregory
• [Elecraft] USB Cable Power Requirements   Tim Groat
• [Elecraft] Is the K3 a "fun" radio to operate ?   Chuck Guenther
• [Elecraft] K3 RTTY Delay on RX   Dave Hachadorian
• [Elecraft] P3 svga mod problem   Dave Hachadorian
• [Elecraft] P3 svga mod problem   Dave Hachadorian
• [Elecraft] Harrowing P3SVGA firmware upgrade   Dave Hachadorian
• [Elecraft] K3 Receiver   Dave Hachadorian
• [Elecraft] K3 occasionally stuck in transmit with N1MM   Dave Hachadorian
• [Elecraft] K3 or KX3 on my sailing yacht?   Tim Hague
• [Elecraft] 472KHz transverter for KX3   Tim Hague
• [Elecraft] 472KHz transverter for KX3   Tim Hague
• [Elecraft] Don's comments on ESSB and AM   Tim Hague
• [Elecraft] New goodies   Tim Hague
• [Elecraft] KPA500 / KAT 500   Tim Hague
• [Elecraft] K3 2 M solid state amps   Joel Hallas
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] Digital modes   Ian Kahn - Ham
• [Elecraft] Surge Protection   Ian Kahn - Ham
• [Elecraft] Using KAT500 With Antenna Switch   Ian Kahn - Ham
• [Elecraft] Using KAT500 With Antenna Switch   Ian Kahn - Ham
• [Elecraft] OT-P3 capture of a 17M intruder   Bill Hammond
• [Elecraft] OT-P3 capture of a 17M intruder   Bill Hammond
• [Elecraft] OT-P3 capture of a 17M intruder   Bill Hammond
• [Elecraft] OT-P3 capture of a 17M intruder   Bill Hammond
• [Elecraft] KX3 and Heil Proset - IC PS-IC   Bill Hammond
• [Elecraft] KX3 Backpack Recommendations   Bruce Hammond
• [Elecraft] iSDR and KX3 problems   Augie Hansen
• [Elecraft] KX3 no cw in ssb mode?   Augie Hansen
• [Elecraft] (ELECRAFT) K3 RECEIVER   Augie Hansen
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Augie Hansen
• [Elecraft] KX1 - anyone operate standing?   John Harper
• [Elecraft] FW: MD's gotta go... :>)   Bill Harris
• [Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80   Mike Harris
• [Elecraft] K3; Main menu and Config menu settings   Mike Harris
• [Elecraft] KX# power supply   Alan Hawrylyshen
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Keith Heimbold
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Keith Heimbold
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Keith Heimbold
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Keith Heimbold
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Keith Heimbold
• [Elecraft] Is the K3 a "fun" radio to operate ?   Keith Heimbold
• [Elecraft] KX3 future sale   Keith Heimbold
• [Elecraft] KX3 future sale   Keith Heimbold
• [Elecraft] [K3] Integration and Increasing complexity   Keith Heimbold
• [Elecraft] [K3] Integration and Increasing complexity   Keith Heimbold
• [Elecraft] Lee's HiJack Mail   Keith Heimbold
• [Elecraft] [KX3] 160-80 meter mod?   Rich Heineck
• [Elecraft] Broadcast band interference [KX3}]   Rich Heineck
• [Elecraft] KXBC3 charging   Rich Heineck
• [Elecraft] KX3 Smarter Charger   Rich Heineck
• [Elecraft] [K2] Inductivity of Toroids   Daniel Heise
• [Elecraft] KX3 Mobile installation   Daniel Helmer
• [Elecraft] KX3 Mobile installation   Daniel Helmer
• [Elecraft] KX# power supply   Jeff Herr
• [Elecraft] [KX3] 160-80 meter mod?   Jeff Herr
• [Elecraft] KX3 Charger KXBC3 and alternative power source.   Jeff Herr
• [Elecraft] Kenwood MC43 with KX3   Jeff Hetherington
• [Elecraft] Fwd: Best Antenna Portable/Tabletop Operation for KX3   David Higdon
• [Elecraft] FS Bencher Elecraft Hex Key   Robert Higgins
• [Elecraft] K3 power drop and ERR 12V   W2RU - Bud Hippisley
• [Elecraft] OT-P3 capture of a 17M intruder   David Honey
• [Elecraft] K3 - Intermittently, using Band switch to return to 40M and the mode is in USB   J.K. Hooper
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Thomas Horsten
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Thomas Horsten
• [Elecraft] KPA500 HV concerns   Brett Howard
• [Elecraft] KPA 500 - Normal behavior?   Brett Howard
• [Elecraft] KX3 and KPA500 ... full power out?   Brett Howard
• [Elecraft] KX3 integration with the KPA500?   Brett Howard
• [Elecraft] KPA 500 - Normal behavior?   Brett Howard
• [Elecraft] [KX3] 160/80 meter SMT mod   Brett Howard
• [Elecraft] Remote Operation   Roger Huntley
• [Elecraft] Custom 700 Hz 8-Pole K3 Filters (by INRAD)   Gary W. Hvizdak
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   Gary W. Hvizdak
• [Elecraft] My K2 is finished up to testing stage but no Transmit - receives fine all bands ideas?   Clifford Hynds
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Clifford Hynds
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Clifford Hynds
• [Elecraft] My K2 is finished up to testing stage but no Transmit - receives fine all bands ideas? Now TX sought of?   Clifford Hynds
• [Elecraft] Troubleshooting my K2 U4 on RF board Pin 7 shows 4.8V manual says 0 ?   Clifford Hynds
• [Elecraft] My K2 is now Transmitting 15W on 80M CW but power drops off as I go up bands   Clifford Hynds
• [Elecraft] K2 Repairs on hold while i fix my K3 12V ERR - now Fixed   Clifford Hynds
• [Elecraft] K2 Repairs on hold while i fix my K3 12V ERR - now Fixed   Clifford Hynds
• [Elecraft] Seems R98 was the main culprit with my K2 Low power TX fault bad solder joint though looked ok.Now 90%+ there   Clifford Hynds
• [Elecraft] Its not over yet, I've gone back to basic K2 troubleshooting and find i have what seems a massive loss through the variable Crystal filter ?   Clifford Hynds
• [Elecraft] Its not over yet, I've gone back to basic K2 troubleshooting and find i have what seems a massive loss through the variable Crystal filter ?   Clifford Hynds
• [Elecraft] [KX3]2M Module   Phil Hystad
• [Elecraft] I wish Elecraft would make this radio   Phil Hystad
• [Elecraft] K3 suggestion   Phil Hystad
• [Elecraft] [KPA500] Hole in front panel?   Phil Hystad
• [Elecraft] [K3][P3] Using the P3 for SSTV   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] Is the K3 a "fun" radio to operate ?   Phil Hystad
• [Elecraft] KX3 Battery Holder and Batter Removal   Phil Hystad
• [Elecraft] KX3 Battery Holder and Batter Removal   Phil Hystad
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Phil Hystad
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Phil Hystad
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Phil Hystad
• [Elecraft] 2-meter solid-state linear amplifiers with K3   Phil Hystad
• [Elecraft] K3 2 M solid state amps   Phil Hystad
• [Elecraft] KAT500 Performance Clarification   Phil Hystad
• [Elecraft] KAT500 Performance Clarification   Phil Hystad
• [Elecraft] KAT500 Performance Clarification   Phil Hystad
• [Elecraft] Best Portable Antenna   Phil Hystad
• [Elecraft] Best Portable Antenna   Phil Hystad
• [Elecraft] K3 Remote VFO tuning control   Edward Dickinson III
• [Elecraft] Is the K3 a "fun" radio to operate ?   Edward Dickinson III
• [Elecraft] K3 Receiver   Edward Dickinson III
• [Elecraft] KAT500 problem   Hunsdon Cary III
• [Elecraft] K3-KAT500-KPA500 issues resolved   Hunsdon Cary III
• [Elecraft] W2 HF Wattmeter FOR SALE   Hunsdon Cary III
• [Elecraft] W2 HF Wattmeter FOR SALE   Hunsdon Cary III
• [Elecraft] OT: Receive noise / ground - NO NOISE   Ignacy
• [Elecraft] K3 2 M solid state amps   Ignacy
• [Elecraft] KPA500: strange behaviour - any ideas?   Ignacy
• [Elecraft] KAT500 Performance Clarification   Ignacy
• [Elecraft] ZS2/N2DE QRV from South Africa Today, Tomorrow   Ignacy
• [Elecraft] K3 occasionally stuck in transmit with N1MM   Ignacy
• [Elecraft] KX3 digital   Ariel Jacala
• [Elecraft] K2/10 upgrade question   Ariel Jacala
• [Elecraft] Has anyone tried the Ten-Tec 418 amp with the K2/K3/KX3?   Ariel Jacala
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Ariel Jacala
• [Elecraft] KX3 ~ factory testing   Jan
• [Elecraft] iSDR & KX3   Jan
• [Elecraft] KPA500 240V wiring   Jay
• [Elecraft] K3 will not go into XMIT with MMTTY.EXTFSK   Jay
• [Elecraft] K3 does not remember band modes   Jay
• [Elecraft] OT: High RF currents in small TX'ing lopps   Fred Jensen
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Fred Jensen
• [Elecraft] P3 - Fixed Tune Mode anomaly   Fred Jensen
• [Elecraft] KPA500 Firmware loading VERY long   Fred Jensen
• [Elecraft] KPA500 RFI problem   Fred Jensen
• [Elecraft] KPA500 RFI problem   Fred Jensen
• [Elecraft] Elecraft Digest, Vol 105, Issue 14   Fred Jensen
• [Elecraft] K3 S-Meter   Fred Jensen
• [Elecraft] [KAT500] Auto Tuning   Fred Jensen
• [Elecraft] {OT} - On the subject of "best" portable antennas   Fred Jensen
• [Elecraft] Post to the group   Fred Jensen
• [Elecraft] Post to the group   Fred Jensen
• [Elecraft] The Old Days   Fred Jensen
• [Elecraft] OT: Am for aircraft communications   Fred Jensen
• [Elecraft] What CW Filters do others have   Joe Subich, W4TV
• [Elecraft] [K3] Line Out level   Joe Subich, W4TV
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Joe Subich, W4TV
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Joe Subich, W4TV
• [Elecraft] COM port not working   Joe Subich, W4TV
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   Joe Subich, W4TV
• [Elecraft] K3 occasionally stuck in transmit with N1MM   Joe Subich, W4TV
• [Elecraft] PIN for K3??   Joe Subich, W4TV
• [Elecraft] mmtty setup for k3   John
• [Elecraft] KXV3A Utility Program 1 milliwatt calibration failure   JohnDePrimo
• [Elecraft] KXV3A Utility Program 1 milliwatt calibration failure   JohnDePrimo
• [Elecraft] P3   John_N1JM
• [Elecraft] P3-K For Sale   John_N1JM
• [Elecraft] P3-K For Sale   John_N1JM
• [Elecraft] KX3 AGC *PLS   John_N1JM
• [Elecraft] KX3 Shift Passband in FSK-D mode   John_N1JM
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   John_N1JM
• [Elecraft] XMIT EQUALIZTION   Lyle Johnson
• [Elecraft] K3 - DATA mode does not TX   Lyle Johnson
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Rick Johnson
• [Elecraft] [KX3] Firmware suggestions.   William C. Johnson
• [Elecraft] (Elecraft) Suggested key paddle for CW for the K3 and others (not expensive)   Joseph Trombino, Jr
• [Elecraft] Remote Operation   D Joyce
• [Elecraft] K3 Macros in memory   Rich - K1HTV
• [Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80   Brian - K1NW
• [Elecraft] KPA500 RFI problem   Guy Olinger K2AV
• [Elecraft] K3 Sub Receiver Problems   Guy Olinger K2AV
• [Elecraft] YALB   K2GN
• [Elecraft] P3 - Fixed Tune Mode anomaly   Mike K2MK
• [Elecraft] KPA500 Firmware loading VERY long   Mike K2MK
• [Elecraft] Relay type noise with KPA500 and PR6   Mike K2MK
• [Elecraft] P3 Freeze.   Mike K2MK
• [Elecraft] P3, VGA card - USB connectors   Mike K2MK
• [Elecraft] K3 A couple of buttons do not work   Vic K2VCO
• [Elecraft] P3   Vic K2VCO
• [Elecraft] PSK31 on K3/100   Elecraft K3
• [Elecraft] Is the K3 a "fun" radio to operate ?   Elecraft K3
• [Elecraft] KAT500 Shipping   Ken K3IU
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Ken K3IU
• [Elecraft] KPA500 Firmware loading VERY long   Ken Wagner K3IU
• [Elecraft] KX3 NR   K3WWP
• [Elecraft] KX3 encoder: mechanical noise?   K4THE
• [Elecraft] Remote Rig questions   K5WA
• [Elecraft] KX3 VOX in data mode   K7JLTextra
• [Elecraft] KX3 VOX in data mode   K7JLTextra
• [Elecraft] KX3 AGC *PLS   K7JLTextra
• [Elecraft] K3 XV50 transverter question   K7MDL
• [Elecraft] K144XV TX Spur   K7MDL
• [Elecraft] (OT) HRD Remote Server on WIN7   K7MDL
• [Elecraft] Elecraft FTP server unreachable?   Mike K8CN
• [Elecraft] Elecraft FTP server unreachable?   Mike K8CN
• [Elecraft] Elecraft FTP server unreachable?   Mike K8CN
• [Elecraft] K3 Remote VFO tuning control   Gary K9GS
• [Elecraft] K3 Remote VFO tuning control   Gary K9GS
• [Elecraft] Dayton 2013   Gary K9GS
• [Elecraft] K3 DVK Install   Gary K9GS
• [Elecraft] K3 DVK Install   Gary K9GS
• [Elecraft] SOLUTION IDENTIFIED--Relay type noise with KPA500 and PR6   K9IR
• [Elecraft] KPA500 interrupter question   K9IR
• [Elecraft] KPA500 Firmware loading VERY long   Bill K9YEQ
• [Elecraft] P3   Bill K9YEQ
• [Elecraft] P3   Bill K9YEQ
• [Elecraft] P3 Firmware Checksum failure - Supplemental   Bill K9YEQ
• [Elecraft] P3 Firmware Checksum failure - Supplemental   Bill K9YEQ
• [Elecraft] COM port not working   Bill K9YEQ
• [Elecraft] Edgeport [was: COM port not working]   Bill K9YEQ
• [Elecraft] N1MM Macro's for the KX3 Digital Voice Recorder.   KD3TB
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   KD8NNU
• [Elecraft] [KX3] Now that was fun!!!!!   KD8NNU
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   KD8NNU
• [Elecraft] K2 Filter Alignment   Bernie KF0QS
• [Elecraft] Question Regarding Direct Conversion Receiver   Bernie KF0QS
• [Elecraft] K3 Sub Receiver Problems   KGØUS
• [Elecraft] K3 Sub Receiver Problems   KGØUS
• [Elecraft] Perfect case for KX3!   KJ4VQI at aol.com
• [Elecraft] KX3 POWER ON/OFF OPTION   KM4VX
• [Elecraft] [OT] RBW of CW Skimmer?   KQ8M
• [Elecraft] Elecraft Digest, Vol 105, Issue 14   KR9A
• [Elecraft] New Output Power Issue   Ian Kahn
• [Elecraft] Is the K3 a "fun" radio to operate ?   Ian Kahn
• [Elecraft] Is the K3 a "fun" radio to operate ?   Ian Kahn
• [Elecraft] P3, VGA card - USB connectors   Ian Kahn
• [Elecraft] Elecraft hey   Phil Kane
• [Elecraft] end fed   Keith-K5ENS
• [Elecraft] K3 Remote VFO tuning control   Iain Kelly
• [Elecraft] K3 Remote VFO tuning control   Iain Kelly
• [Elecraft] [K2] question about crystal filters and DSP audio filter settings   Kevin
• [Elecraft] W3PFR/N0SS audio output board for K2 wanted   Chris Kimball
• [Elecraft] [K1} Filter Board Issue/ Rapid pulse receiver noise   Paul Kirley
• [Elecraft] Fun To Use   Steven Kline
• [Elecraft] K3 Keyer Cable Connection Problem   Mark Kopec
• [Elecraft] K3 Keyer Cable Connection Problem   Mark Kopec
• [Elecraft] Surge Protection   Mark Kopec
• [Elecraft] Surge Protection   Mark Kopec
• [Elecraft] [K3] For Sale K3/10   Mark Kopec
• [Elecraft] OT: High RF currents in small TX'ing lopps   Ken G Kopp
• [Elecraft] OT: Receive noise / ground - NO NOISE   Ken G Kopp
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Ken G Kopp
• [Elecraft] [KX3] Re: my first SOTA with my new KX3   Ken G Kopp
• [Elecraft] OT-P3 capture of a 17M intruder   Ken G Kopp
• [Elecraft] OT: Oregon SP Seasonde photos   Ken G Kopp
• [Elecraft] OT: Am for aircraft communications   Ken G Kopp
• [Elecraft] Unable to get mic working on K3   Jay Krishna
• [Elecraft] KX3 Charger KXBC3 and alternative power source.   Tighe Kuykendall
• [Elecraft] P3 Firmware Checksum failure - Supplemental   LA8AW
• [Elecraft] P3 w/SVGA card - and FW version 1.24 /Microham mK-II / DXBase2007 v1.10   LA8AW
• [Elecraft] KX3 3103 on air!   Dave LaBat
• [Elecraft] K3-EZ   Phil LaMarche
• [Elecraft] KX3 VOX in data mode   Barry LaZar
• [Elecraft] K3 or KX3 on my sailing yacht?   Barry LaZar
• [Elecraft] Internal Battery Run Times for KX3   John Lally
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Peter Lambert
• [Elecraft] How do I print a spectrogram file?   Peter Lambert
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Peter Lambert
• [Elecraft] K3 suggestion   Lance Collister, W7GJ
• [Elecraft] Clipperton Island Update - TX5K on 6m with a K3 and KX3!   Lance Collister, W7GJ
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Lance Collister, W7GJ
• [Elecraft] Update - TX5K Clipperton Island on 6m   Lance Collister, W7GJ
• [Elecraft] [KPA500] Hole in front panel?   Pete Lascell
• [Elecraft] Don's comments on ESSB and AM   John Lawrence
• [Elecraft] Don's comments on ESSB and AM   John Lawrence
• [Elecraft] end fed   Phillip Levine
• [Elecraft] Surge Protection   William Levy
• [Elecraft] KPA500 / KAT 500   Anthony Lewis
• [Elecraft] (no subject)   Michael Linden
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Thomas Lindner
• [Elecraft] KX3 builder's alert #1 released - IMPORTANT   Dave Lindsley
• [Elecraft] Invitation to connect on LinkedIn   Rich Zwirko K1HTV via LinkedIn
• [Elecraft] Kx3: How to interface UP, DOWN and PTT signal ?   Brian Lodahl
• [Elecraft] My in-progress K1 is ALIVE!!!   Scotty Long
• [Elecraft] I am confused… or maybe its just a brain fart...   Phil Townsend Lontz
• [Elecraft] [OT] RBW of CW Skimmer?   Al Lorona
• [Elecraft] Broadcast band interference   Al Lorona
• [Elecraft] Post to the group   Al Lorona
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Jim Lowman
• [Elecraft] Has anyone tried the Ten-Tec 418 amp with the K2/K3/KX3?   Jim Lowman
• [Elecraft] Is the K3 a "fun" radio to operate ?   Jim Lowman
• [Elecraft] Is the K3 a "fun" radio to operate ?   Jim Lowman
• [Elecraft] Will Elecraft be at the Yuma Hamfest?   Jim Lowman
• [Elecraft] Post to the group   Jim Lowman
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Jim Lowman
• [Elecraft] Post to the group   Jim Lowman
• [Elecraft] 903 or 1296 Mhz Transverter   Jim Lowman
• [Elecraft] [KAT500]schematic   Geoffrey Mackenzie-Kennedy
• [Elecraft] My K2 is finished up to testing stage but no Transmit - receives fine all bands ideas?   Geoffrey Mackenzie-Kennedy
• [Elecraft] [XV432} LO Instability Problem   Geoffrey Mackenzie-Kennedy
• [Elecraft] ESSB Equalization   Geoffrey Mackenzie-Kennedy
• [Elecraft] KPA500 Keying Issue   Dave's Mail
• [Elecraft] RFTB Sunday night   Larry Makoski
• [Elecraft] KX3 power supply   Bruce Manning
• [Elecraft] KPA500 For Sale   Scott Manthe
• [Elecraft] Elecraft K3/KRX3 for sale   Scott Manthe
• [Elecraft] SOLD!! KPA500 For Sale SOLD!!   Scott Manthe
• [Elecraft] Elecraft K3 for sale   Scott Manthe
• [Elecraft] Elecraft K3 for sale-NO LONGER AVAILABLE!   Scott Manthe
• [Elecraft] Dayton 2013   Scott Manthe
• [Elecraft] WTB: Elecraft P3   Scott Manthe
• [Elecraft] WTB: Elecraft P3   Scott Manthe
• [Elecraft] K3; Main menu and Config menu settings   Scott Manthe
• [Elecraft] ESSB Equalization   Scott Manthe
• [Elecraft] (no subject)   Michael Mardis
• [Elecraft] Kx3 for rtty. Wrong sideband on afsk etc.   Mark
• [Elecraft] Broadcast band interference [KX3}]   Mark
• [Elecraft] K3 LONG delay in TX after TXINH removed (solved)   Mark
• [Elecraft] Kx3 MCU 1.36 / DSP 1.05, AFSK-A ssb fixed!   Mark
• [Elecraft] K3 LONG delay in TX after TXINH removed (solved)   Mark
• [Elecraft] KX3 Battery Holder and Batter Removal   Gary Marklund
• [Elecraft] Edgeport [was: COM port not working]   Mike Markowski
• [Elecraft] ESSB Equalization   Mike Markowski
• [Elecraft] [K3] Ref Cal failed   Martin
• [Elecraft] [KX3]2M Module   Helmut Mayrhofer
• [Elecraft] Best Portable Antenna   David McAnally
• [Elecraft] Knob and Button Functions   Tom McCulloch
• [Elecraft] K2/10 upgrade question   Tom McCulloch
• [Elecraft] K2 Can't hear the side tone but it is working!   Tom McCulloch
• [Elecraft] K2 Can't hear the side tone but it is working!   Tom McCulloch
• [Elecraft] KX1   Robert S. McCuskey
• [Elecraft] Paddle for the KX3 - Begali Adventure   Robert S. McCuskey
• [Elecraft] KX1 - W5JH Baby Black Widow Key is sold.   Robert S. McCuskey
• [Elecraft] XMIT EQUALIZATION   Jim McDonald
• [Elecraft] K3_EZ Program   Jim McDonald
• [Elecraft] K3_EZ Program   Jim McDonald
• [Elecraft] Excel file of K3 & P3 menus   Jim McDonald
• [Elecraft] K3; Main menu and Config menu settings   Jim McDonald
• [Elecraft] K3; Main menu and Config menu settings   Jim McDonald
• [Elecraft] K3; Main menu and Config menu settings   Jim McDonald
• [Elecraft] K3; Main menu and Config menu settings   Jim McDonald
• [Elecraft] Strange K3 Utility Behavior   Jim McDonald
• [Elecraft] K3 question   Jim McDonald
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   John Merrill
• [Elecraft] Buddipole portable antenna   Michael Mickelson
• [Elecraft] No resopnse on config menu   Lars Midtboe
• [Elecraft] No resopnse on config menu   Lars Midtboe
• [Elecraft] Using monitor on K3   Ron Midwin
• [Elecraft] ESSB Equalization   Ron Midwin
• [Elecraft] Use K3/0 in another room in my QTH?   Ron Midwin
• [Elecraft] Use K3/0 in another room in my QTH?   Ron Midwin
• [Elecraft] Nickel Zinc Batteries   Mike
• [Elecraft] KX3 ground loop isolator   Mike
• [Elecraft] KX3 ground loop isolator   Mike
• [Elecraft] KX3 ground loop isolator   Mike
• [Elecraft] KX3 ground loop isolator   Mike
• [Elecraft] Text to RTTY via N1MM?   Jim Miller
• [Elecraft] K3 Utility - VFO B memory not being loaded   Jim Miller
• [Elecraft] KPA500 RFI problem   Jim Miller
• [Elecraft] K3 RTTY   Jim Miller
• [Elecraft] [OT] RBW of CW Skimmer?   Jim Miller
• [Elecraft] YALB   Jim Miller
• [Elecraft] YALB   Jim Miller
• [Elecraft] P3   Jim Miller
• [Elecraft] Edgeport [was: COM port not working]   Jim Miller
• [Elecraft] K3 Keyer speed?   Jim Miller
• [Elecraft] XMIT EQUALIZTION   david Moes
• [Elecraft] K3 Keyer Cable Connection Problem   david Moes
• [Elecraft] [K3] Line Out level   david Moes
• [Elecraft] OT-P3 capture of a 17M intruder   david Moes
• [Elecraft] P3   david Moes
• [Elecraft] K3 suggestion   David Moes
• [Elecraft] K3 Remote VFO tuning control   David Moes
• [Elecraft] What CW Filters do others have   David Moes
• [Elecraft] YALB   David Moes
• [Elecraft] KX3 no cw in ssb mode?   MontyS
• [Elecraft] KX3 encoder: mechanical noise?   Andrew Moore
• [Elecraft] K2 Can't hear the side tone but it is working!   Andrew Moore
• [Elecraft] K3 WSPR settings that work for me   Dennis Moore
• [Elecraft] [KAT500] KPA500 firmware upgrade needed?   Randy Moore
• [Elecraft] [KAT500] Auto Tuning   Randy Moore
• [Elecraft] [KAT500] Auto Tuning   Randy Moore
• [Elecraft] [KAT500] Auto Tuning   Randy Moore
• [Elecraft] Best Portable Antenna   Randy Moore
• [Elecraft] KX3 Battery Charging Question   Dave Moorman
• [Elecraft] K3 suggestion   Sam Morgan
• [Elecraft] K3 how do I reduce the beep tone volume   Sam Morgan
• [Elecraft] My in-progress K1 is ALIVE!!!   Mike Morrow
• [Elecraft] My in-progress K1 is ALIVE!!!   Mike Morrow
• [Elecraft] My in-progress K1 is ALIVE!!!   Mike Morrow
• [Elecraft] Question on KX1 paddle mount   John Evans - N0HJ
• [Elecraft] Question on KX1 paddle mount   John Evans - N0HJ
• [Elecraft] For Sale - handled/rackmount brackets/panels for K2   John Evans - N0HJ
• [Elecraft] For Sale - handled/rackmount brackets/panels for K2   John Evans - N0HJ
• [Elecraft] KX1 - anyone operate standing?   N1EU
• [Elecraft] KX1 - anyone operate standing?   N1EU
• [Elecraft] I wish Elecraft would make this radio   N1EU
• [Elecraft] I wish Elecraft would make this radio   N1EU
• [Elecraft] {OT} - On the subject of "best" portable antennas   N1EU
• [Elecraft] I wish Elecraft would make this radio   Barry N1EU
• [Elecraft] [k3] BAT LOW   N2TK, Tony
• [Elecraft] DVK question   N2TK, Tony
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   N2TK, Tony
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   N2TK, Tony
• [Elecraft] K3 RTTY Delay on RX   N3XX
• [Elecraft] K3 RTTY Delay on RX   N3XX
• [Elecraft] [K3] No-touch configuration for CW contesting   Pete Smith N4ZR
• [Elecraft] P3 MKR Operation is jumpy / baud rate   Allen Brier N5XZ
• [Elecraft] PIN for K3??   N6FD
• [Elecraft] P3 Freeze.   Paul Saffren N6HZ
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Paul Saffren N6HZ
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Paul Saffren N6HZ
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Paul Saffren N6HZ
• [Elecraft] XG3 Tones?   Paul Saffren N6HZ
• [Elecraft] Text to RTTY via N1MM?   iain macdonnell - N6ML
• [Elecraft] Text to RTTY via N1MM?   iain macdonnell - N6ML
• [Elecraft] Unable to get mic working on K3   iain macdonnell - N6ML
• [Elecraft] Unable to get mic working on K3   iain macdonnell - N6ML
• [Elecraft] KPA500 Firmware loading VERY long   iain macdonnell - N6ML
• [Elecraft] [K3] Line Out level   iain macdonnell - N6ML
• [Elecraft] [K3] - Speaker output in various modes   iain macdonnell - N6ML
• [Elecraft] K3 DVK Install   iain macdonnell - N6ML
• [Elecraft] Remote power on for k3/0 via remote rig or other   iain macdonnell - N6ML
• [Elecraft] KX3 ground loop isolator   iain macdonnell - N6ML
• [Elecraft] KPA500 Keying Issue   iain macdonnell - N6ML
• [Elecraft] KPA500 / KAT 500   iain macdonnell - N6ML
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Rick Tavan N6XI
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Rick Tavan N6XI
• [Elecraft] K2/10 upgrade question   Rick Tavan N6XI
• [Elecraft] KPA500 / KAT 500   Rick Tavan N6XI
• [Elecraft] K2 KSB2 help please   N8CEP
• [Elecraft] K2 KSB2 help please   N8CEP
• [Elecraft] K2 KSB2 help please   N8CEP
• [Elecraft] K2 KSB2 help please   N8CEP
• [Elecraft] NAQCC Sprint Wednesday night!   NAQCC
• [Elecraft] P3, VGA card - USB connectors   ANDY NEHAN
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   NM6E_QRP
• [Elecraft] The Old Days   NZ0T
• [Elecraft] WTB: 1.5" Tilt Stand   NZ1I
• [Elecraft] 903 or 1296 Mhz Transverter   NZ1I
• [Elecraft] 903 or 1296 Mhz Transverter   NZ1I
• [Elecraft] K3 suggestion   Ken Nicely
• [Elecraft] P3 Firmware Checksum failure   Nick
• [Elecraft] Is the K3 a "fun" radio to operate ?   Nick-WA5BDU
• [Elecraft] Post to the group   Nick-WA5BDU
• [Elecraft] KX# power supply   Bob Nielsen
• [Elecraft] iSDR and KX3 problems   JP OConnor
• [Elecraft] K3 Sub Receiver Problems   ON4YVO
• [Elecraft] KRX3 aux protection: good idea?   Franki ON5ZO
• [Elecraft] Kx3: How to interface UP, DOWN and PTT signal ?   Brian Lodahl OZ2BRN
• [Elecraft] [KX3] 160/80 meter SMT mod   Jessie Oberreuter
• [Elecraft] New KX3 - a few observations, a bug report, and suggestion   Oliver Olsen
• [Elecraft] KXBC3 shipping status   Jeffrey Otterson
• [Elecraft] K3 or KX3 on my sailing yacht?   Dietmar Otterstaetter
• [Elecraft] Is the K3 a "fun" radio to operate ?   Arie Kleingeld PA3A
• [Elecraft] KPA500 / KAT 500   PTA_ABD
• [Elecraft] K144XV TX Spur   Dale Parfitt
• [Elecraft] Don's comments on ESSB and AM   Ralph Parker
• [Elecraft] FS Begali Paddles for your Elecraft station   R Patrick
• [Elecraft] Post to the group   Paul
• [Elecraft] K3 remote VFO (KX3 too, for that matter)   Brian Pepperdine
• [Elecraft] P3 use   Brian Pepperdine
• [Elecraft] K2 compatible: 100 Watt amplifier and matching 100 Watt Automatic Tuner for sale   David Perrin
• [Elecraft] P3   VANO Peter
• [Elecraft] KX3 power supply   Don Pomplun
• [Elecraft] Post to the group   Don Pomplun
• [Elecraft] KX3 AC Power Supply followup   Don Pomplun
• [Elecraft] KX3 and Heil Proset - IC PS-IC   Richard Pongratz
• [Elecraft] 2-meter solid-state linear amplifiers with K3   Samir Popaja
• [Elecraft] P3 - Fixed Tune Mode anomaly   Rick Prather
• [Elecraft] K3 line out   Rick Prather
• [Elecraft] Lee's HiJack Mail   David Pratt
• [Elecraft] Perfect case for KX3!   Alan Price
• [Elecraft] Is "break-in" needed for NiMH batteries   Alan Price
• [Elecraft] Let me build your K2.   Alan Price
• [Elecraft] How do I print a spectrogram file?   Alan Price
• [Elecraft] test   Alan Price
• [Elecraft] test from hotmail   Alan Price
• [Elecraft] Let me build your K2 or other Elecraft radio   Alan Price
• [Elecraft] Let me build you a K2 or any other Elecraft kit.   Alan Price
• [Elecraft] K3 power drop and ERR 12V   Mark Pride
• [Elecraft] K3 power drop and ERR 12V - resolved   Mark Pride
• [Elecraft] MFJ-434B DVK wiring to K3   Mark Pride
• [Elecraft] K3 suggestion   Stephen Prior
• [Elecraft] KX3 VOX in data mode   Stephen Prior
• [Elecraft] OT-P3 capture of a 17M intruder   Stephen Prior
• [Elecraft] P3   Stephen Prior
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Stephen Prior
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Stephen Prior
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Stephen Prior
• [Elecraft] K3 or KX3 on my sailing yacht?   Stephen Prior
• [Elecraft] Is "break-in" needed for NiMH batteries   Dale Putnam
• [Elecraft] Post to the group   Dale Putnam
• [Elecraft] OT: QST article from one of our own   Don Putnick
• [Elecraft] CW Touch Keyer   Chr Quale
• [Elecraft] KPA500 - 230v Surge Protection   Randy
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Michael Ransom
• [Elecraft] K3-JT65   George Rebong
• [Elecraft] K3 enhancement request   David F. Reed
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   David F. Reed
• [Elecraft] [K2] For Sale: KDSP2, KAT100, KPA100, other parts   Dan Reimer
• [Elecraft] [K2] For Sale: KDSP2, KAT100, KPA100, other parts - SALE PENDING   Dan Reimer
• [Elecraft] Software   Mike Reublin
• [Elecraft] COM port not working   Mike Reublin
• [Elecraft] YALB   Jim Rhodes
• [Elecraft] Remote Rig questions   Jim Rhodes
• [Elecraft] YALB   Jim Rhodes
• [Elecraft] Edgeport [was: COM port not working]   Jim Rhodes
• [Elecraft] Use K3/0 in another room in my QTH?   Jim Rhodes
• [Elecraft] Lee's HiJack Mail   Jim Rhodes
• [Elecraft] K3 #7049 finished   Rich
• [Elecraft] Knob and Button Functions   Rich
• [Elecraft] K3 wont power on!   Rich
• [Elecraft] KX3 Battery Holder and Batter Removal   Rich
• [Elecraft] Where are firmware releases announced?   Rich
• [Elecraft] XMIT EQUALIZATION and K3EZ   Richard
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Richard
• [Elecraft] [Elecraft_K3] Deaf new kit built K3 .   Richard
• [Elecraft] [K3] Strange S meter behaviour   Richard
• [Elecraft] KPA500: strange behaviour - any ideas?   Richard
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Richard
• [Elecraft] KX3 Smarter Charger   Richard
• [Elecraft] [K3]: For Sale K3-100   Rob
• [Elecraft] [K3]: Re: For Sale K3-100   Rob
• [Elecraft] Vibroplex vari-speed attachment wanted   Stephen Roberts
• [Elecraft] CW Touch Keyer   Stephen Roberts
• [Elecraft] K2/10 upgrade question   Stephen Roberts
• [Elecraft] K1 backlight; trimming pins   Paul Roche
• [Elecraft] My in-progress K1 is ALIVE!!!   Paul Roche
• [Elecraft] Post to group   Mike Rodgers
• [Elecraft] best portable antenna   Mike Rodgers
• [Elecraft] Here's link for NorCal qrp doublet   Mike Rodgers
• [Elecraft] KPA 500 - Normal behavior?   Lu Romero
• [Elecraft] KPA 500 - Normal behavior?   Lu Romero
• [Elecraft] Is the K3 a "fun" radio to operate ?   Lu Romero
• [Elecraft] [KAT500] Auto Tuning   Lu Romero
• [Elecraft] K3 RTTY contest   Rory
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Rose
• [Elecraft] [k3] BAT LOW   Rose
• [Elecraft] OT-P3 capture of a 17M intruder   Rose
• [Elecraft] OT-P3 capture of a 17M intruder   Rose
• [Elecraft] (no subject)   Rose
• [Elecraft] Lee's HiJack Mail   Rose
• [Elecraft] K3 and HRD   Rick Ruhl
• [Elecraft] K3 and HRD   Rick Ruhl
• [Elecraft] K3/0 Audio mute when pressing SUB   Björn SM0MDG
• [Elecraft] FS: Bencher Hex Key Elecraft Edition   Alexander Sack
• [Elecraft] [KAT500]schematic   Phil & Debbie Salas
• [Elecraft] [KAT500]schematic   Phil & Debbie Salas
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Phil & Debbie Salas
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Phil & Debbie Salas
• [Elecraft] AARA Rayne LA Hamfest   Lisa Jones - Elecraft Sales
• [Elecraft] K3 Remote VFO tuning control   Charles Sanders
• [Elecraft] K3 at LOWFER   Mike Sanders
• [Elecraft] P3   Robert Sands
• [Elecraft] [KAT500] more antennas   Robert Sands
• [Elecraft] The Old Days   Sandy
• [Elecraft] The Old Days   Sandy
• [Elecraft] The Old Days   Sandy
• [Elecraft] Is the K3 a "fun" radio to operate ?   Anthony Scandurra
• [Elecraft] OT-P3 capture of a 17M intruder   Terry Schieler
• [Elecraft] [K3] new build (s/n 7080) Synthesizer calibration throws an E 00005/ERR VCO   Jeff Schmidt
• [Elecraft] [K3] new build (s/n 7080) Synthesizer calibration throws an E 00005/ERR VCO   Jeff Schmidt
• [Elecraft] [K3] Line Out level   Jeff Schmidt
• [Elecraft] [KX3]2M Module   Chris Schrecengost
• [Elecraft] I wish Elecraft would make this radio   Chris Schrecengost
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Chris Schrecengost
• [Elecraft] Knob and Button Functions   Chris Schrecengost
• [Elecraft] KX3 digital   Chris Schrecengost
• [Elecraft] KX3 Power Cord   Holger Schurig
• [Elecraft] KX3 Power Cord   Holger Schurig
• [Elecraft] OT-P3 capture of a 17M intruder   Merv Schweigert
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Merv Schweigert
• [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)   Scott
• [Elecraft] KPA500 1.23 f/w released   Sebastian, W4AS
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Sebastian, W4AS
• [Elecraft] Remote Operation   Jim Sharp
• [Elecraft] iSDR and KX3 problems   Jim Sheldon
• [Elecraft] K3 Remote VFO tuning control   Jim Sheldon
• [Elecraft] [K3] Line Out level   Jim Sheldon
• [Elecraft] K3 Remote VFO Tuning   Jim Sheldon
• [Elecraft] KX3 Beta 1.36 Additional Instructions?   Jim Sheldon
• [Elecraft] Elecraft SSB Net results (1/20/13)   Phil Shepard
• [Elecraft] Elecraft SSB net announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net results (1/27/13)   Phil Shepard
• [Elecraft] Elecraft SSB Net results (12/30/12)   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (1/6/13)   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (1/13/13)   Phillip Shepard
• [Elecraft] FS: K2/10   Sidney
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Ray Sills
• [Elecraft] Responding to posts was: KPA500 Firmware loading VERY long   Ray Sills
• [Elecraft] KX3 Power Cord   Ray Sills
• [Elecraft] KX3 Smarter Charger   Ray Sills
• [Elecraft] Fwd: K3 Sub Receiver Problems   Barry Simpson
• [Elecraft] FS: K60XV 60-M and transverter adapter - new unbuilt kit   Johnny Siu
• [Elecraft] [KX3]2M Module   Alan Slusher
• [Elecraft] K3 won't shut off?   Fred Smith
• [Elecraft] [K2] Inductivity of Toroids   Fred Smith
• [Elecraft] [KX3]2M Module   Fred Smith
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Fred Smith
• [Elecraft] KX3 Batteries Charger   Fred Smith
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Fred Smith
• [Elecraft] I wish Elecraft would make this radio   Fred Smith
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Fred Smith
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Fred Smith
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Fred Smith
• [Elecraft] KX3 - Factory Testing identical to Kit Testing?   Fred Smith
• [Elecraft] KX# power supply   Fred Smith
• [Elecraft] Elecraft could offer small built transceivers, in addition to its kits   Fred Smith
• [Elecraft] K3 RF Power Meter Accuracy   Fred Smith
• [Elecraft] [KPA500] Hole in front panel?   Fred Smith
• [Elecraft] [KX3] Firmware suggestions.   Fred Smith
• [Elecraft] KX3 Whip Antenna   Fred Smith
• [Elecraft] K2 Repairs on hold while i fix my K3 12V ERR - now Fixed   Fred Smith
• [Elecraft] KX3 power supply   Fred Smith
• [Elecraft] KX3 Power Cord   Fred Smith
• [Elecraft] KX3 Power Cord   Fred Smith
• [Elecraft] P3   Fred Smith
• [Elecraft] P3/SVGA Beta Firmware 1.24/1.14 Now Available   Fred Smith
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Fred Smith
• [Elecraft] XG3 Extended Range (lower)   Fred Smith
• [Elecraft] Post to the group   Fred Smith
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Fred Smith
• [Elecraft] Post to the group   Fred Smith
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Fred Smith
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Fred Smith
• [Elecraft] Fwd: Best Antenna Portable/Tabletop Operation for KX3   Fred Smith
• [Elecraft] {OT} - On the subject of "best" portable antennas   Fred Smith
• [Elecraft] Best Portable Antenna   Fred Smith
• [Elecraft] Best Portable Antenna   Fred Smith
• [Elecraft] Best Portable Antenna   Fred Smith
• [Elecraft] Best Portable Antenna   Fred Smith
• [Elecraft] COM port not working   Gary Smith
• [Elecraft] COM port not working   Gary Smith
• [Elecraft] headphone attenuators?   Gary Smith
• [Elecraft] headphone attenuators?   Gary Smith
• [Elecraft] Observations on the Variability of Toroid Inductance (was Inductivity of Toroids)   Jack Smith
• [Elecraft] Measuring Inductors (was Re: [K2] Inductivity of Toroids)   Jack Smith
• [Elecraft] Broadcast band interference   Jack Smith
• [Elecraft] Broadcast band interference [KX3}]   Igor Sokolov
• [Elecraft] KPA500 RFI problem   Igor Sokolov
• [Elecraft] [K3] KXV3 vs KXV3A   Jim Spears
• [Elecraft] [K3] KXV3 vs KXV3A   Jim Spears
• [Elecraft] [K3 - K144XV] frequency offset???   Jim Spears
• [Elecraft] Hardware   Clint Stark
• [Elecraft] YALB   Oscar Staudt
• [Elecraft] K3 doesn't boot when KAT500 is unpowered   Oscar Staudt
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Rick Stealey
• [Elecraft] [ELECRAFT] [k3] Ideas ....   Steef
• [Elecraft] Accessory Voice Recorder for K2...   Steve
• [Elecraft] P3   Wes Stewart
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   Wes Stewart
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Chip Stratton
• [Elecraft] Is "break-in" needed for NiMH batteries   Chip Stratton
• [Elecraft] Broadcast band interference   Chip Stratton
• [Elecraft] K2 Repairs on hold while i fix my K3 12V ERR - now Fixed   Chip Stratton
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   Chip Stratton
• [Elecraft] KX3 Smarter Charger   Chip Stratton
• [Elecraft] What CW Filters do others have   Robert G Strickland
• [Elecraft] [K2] question about crystal filters and DSP audio filter settings   Robert G Strickland
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Gary Surrency
• [Elecraft] Nickel Zinc Batteries   István Szabó
• [Elecraft] Looking for K3 or KX3   Tim
• [Elecraft] 2-meter solid-state linear amplifiers with K3 2-meter option   Peter Torry
• [Elecraft] [K2] Inductivity of Toroids   Fred Townsend
• [Elecraft] [ELECRAFT] [k3] Ideas ....   Fred Townsend
• [Elecraft] [K3] new build (s/n 7080) Synthesizer calibration throws an E 00005/ERR VCO   Fred Townsend
• [Elecraft] K3 Receiver   Lee Trout
• [Elecraft] KX3 What Batteries/Quality Power Supply to Choose?   Greg Troxel
• [Elecraft] KXBC3 charging   Greg Troxel
• [Elecraft] (no subject)   Randy Tudor
• [Elecraft] I wish Elecraft would make this radio   Doug Turnbull
• [Elecraft] P3   Doug Turnbull
• [Elecraft] [KAT500] more antennas   Walter Underwood
• [Elecraft] [KX3] - KXFL3   Walter Underwood
• [Elecraft] {OT} - On the subject of "best" portable antennas   Walter Underwood
• [Elecraft] The Old Days   Walter Underwood
• [Elecraft] KX3 Smarter Charger   Walter Underwood
• [Elecraft] Relay type noise with KPA500 and PR6   Paula Uscian
• [Elecraft] K3 and APRS problem   VE3NFK
• [Elecraft] K3 - DATA mode does not TX   VE3NFK
• [Elecraft] K3 - DATA mode does not TX   VE3NFK
• [Elecraft] K3 - DATA mode does not TX   VE3NFK
• [Elecraft] K3 - DATA mode does not TX   VE3NFK
• [Elecraft] Using KAT500 With Antenna Switch   Doug VE3VS
• [Elecraft] KXBC3 charging   VE3WDM
• [Elecraft] K3; Digital Voice on HF   Matt VK2RQ
• [Elecraft] OT-P3 capture of a 17M intruder   VR2BrettGraham
• [Elecraft] K3 - Microphone Connector   Roger de Valle
• [Elecraft] K3; using QuickMix software.   Roger de Valle
• [Elecraft] K3; using QuickMix software.   Roger de Valle
• [Elecraft] K3 630m-band   Hans H Vollmer
• [Elecraft] K3 RTTY Delay on RX   Bill W
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   W0FK
• [Elecraft] PIN for K3??   Scott W2NTV
• [Elecraft] [KX3] 160-80 meter mod?   Lou Voerman W2ROW
• [Elecraft] Kx3: How to interface UP, DOWN and PTT signal ?   Lou Voerman W2ROW
• [Elecraft] Digital modes   Ted Edwards W3TB
• [Elecraft] KPA500 HV concerns   Ron W3ZV
• [Elecraft] KPA500 RFI problem   Ron W3ZV
• [Elecraft] KPA RFI problem   Ron W3ZV
• [Elecraft] K3 DVK Install   Bill - W4RM
• [Elecraft] K3 ProSet Mic Adaptor   W4SK
• [Elecraft] K3 Amp Interface   W4SK
• [Elecraft] P3   W4SK
• [Elecraft] Best Antenna Portable/Tabletop Operation for KX3   W4SK
• [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)   Bill W4ZV
• [Elecraft] Elecraft K3 for Sale   Robert Dorchuck W6VY
• [Elecraft] Elecraft K3 for Sale   Robert Dorchuck W6VY
• [Elecraft] KPA500 Hole in front panel?   Robert Dorchuck W6VY
• [Elecraft] K3 - Elecraft K3 For Sale   Robert Dorchuck W6VY
• [Elecraft] K3 - Elecraft K3 For Sale   Robert Dorchuck W6VY
• [Elecraft] KX3 EXTENDED VFO TEMPERATURE COMPENSATION PROCEDURE   Mike WA8BXN
• [Elecraft] K3 Remote VFO tuning control   WM3M
• [Elecraft] P3   WM3M
• [Elecraft] KPA500: strange behaviour - any ideas?   WM3M
• [Elecraft] KPA500 / KAT 500   WM3M
• [Elecraft] WT: KDVR3 Digital Voice Recorder   Alfredo Vélez WP3C
• [Elecraft] OT: Elecraft could offer small built transceivers in addition to its kits   Chris Wagner
• [Elecraft] Paddle for the KX3 - has anyone tried the Begali Adventure?   Chris Wagner
• [Elecraft] Best Portable Antenna   Dave Van Wallaghen
• [Elecraft] Best Portable Antenna   Dave Van Wallaghen
• [Elecraft] Wanted: Elecraft K3 (any configuration)   Chad Wasinger
• [Elecraft] K3/KX3 and RemoteRig   Chad Wasinger
• [Elecraft] Remote Operation   Chad Wasinger
• [Elecraft] Wanted: Elecraft K3 (any configuration)   Chad Wasinger
• [Elecraft] K3 CWT Function with firmware MCU 4.60 / DSP 2.80   Chad Wasinger
• [Elecraft] K3 AGC settings for weak signal CW   Chad Wasinger
• [Elecraft] K3 AGC settings for weak signal CW   Chad Wasinger
• [Elecraft] Remote Operation   Chad Wasinger
• [Elecraft] Use K3/0 in another room in my QTH?   Chad Wasinger
• [Elecraft] WTB: K3 KAT3 Internal ATU   Chad Wasinger
• [Elecraft] KXBC3 charging   Mike Weir
• [Elecraft] KXBC3 trickle charge option?   Mike Weir
• [Elecraft] Build, Rescue, or Service your Elecraft?   Alan D. Wilcox
• [Elecraft] K2/10 upgrade question   Jim Wiley
• [Elecraft] [K2] VCO Aignment L30   Don Wilhelm
• [Elecraft] [K2] Inductivity of Toroids   Don Wilhelm
• [Elecraft] [K2] Inductivity of Toroids   Don Wilhelm
• [Elecraft] [K2] Inductivity of Toroids   Don Wilhelm
• [Elecraft] [Bulk] K2 Fault History?   Don Wilhelm
• [Elecraft] KX3 Mobile installation   Don Wilhelm
• [Elecraft] My K2 is finished up to testing stage but no Transmit - receives fine all bands ideas?   Don Wilhelm
• [Elecraft] [KX3] Received today and filter question..   Don Wilhelm
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Don Wilhelm
• [Elecraft] K3 won't shut off, turns on by itself   Don Wilhelm
• [Elecraft] No resopnse on config menu   Don Wilhelm
• [Elecraft] KPA-500 band data input   Don Wilhelm
• [Elecraft] No resopnse on config menu   Don Wilhelm
• [Elecraft] KPA-500 band data input   Don Wilhelm
• [Elecraft] OT: Elecraft could offer small built transceivers in addition to its kits   Don Wilhelm
• [Elecraft] K3 S/N 7081 VFO A Inop   Don Wilhelm
• [Elecraft] K2 - Turns on, locked in transmit   Don Wilhelm
• [Elecraft] Accessory Voice Recorder for K2...   Don Wilhelm
• [Elecraft] MFJ-434B DVK wiring to K3   Don Wilhelm
• [Elecraft] K3 RF Power Meter Accuracy   Don Wilhelm
• [Elecraft] KPA 100 T2 Winding Problem   Don Wilhelm
• [Elecraft] K2 KSB2 help please   Don Wilhelm
• [Elecraft] Question on KX1 paddle mount   Don Wilhelm
• [Elecraft] Troubleshooting my K2 U4 on RF board Pin 7 shows 4.8V manual says 0 ?   Don Wilhelm
• [Elecraft] My K2 is now Transmitting 15W on 80M CW but power drops off as I go up bands   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] RX IQ sound card problems KX3   Don Wilhelm
• [Elecraft] KX3 digital   Don Wilhelm
• [Elecraft] K2 KSB2 help please   Don Wilhelm
• [Elecraft] RX IQ sound card problems KX3   Don Wilhelm
• [Elecraft] How do I print a spectrogram file?   Don Wilhelm
• [Elecraft] KX3 no cw in ssb mode?   Don Wilhelm
• [Elecraft] KX3 power supply   Don Wilhelm
• [Elecraft] Surge Protection   Don Wilhelm
• [Elecraft] K2/10 upgrade question   Don Wilhelm
• [Elecraft] K2 Filter Alignment   Don Wilhelm
• [Elecraft] KX3 Power Cord   Don Wilhelm
• [Elecraft] KX3 Power Cord   Don Wilhelm
• [Elecraft] Is the K3 a "fun" radio to operate ?   Don Wilhelm
• [Elecraft] Is the K3 a "fun" radio to operate ?   Don Wilhelm
• [Elecraft] K2/10 upgrade question   Don Wilhelm
• [Elecraft] K3 AGC settings for weak signal CW   Don Wilhelm
• [Elecraft] [KAT500] more antennas   Don Wilhelm
• [Elecraft] Where are firmware releases announced?   Don Wilhelm
• [Elecraft] KX3 and Heil Proset - IC PS-IC   Don Wilhelm
• [Elecraft] K3 - DATA mode does not TX   Don Wilhelm
• [Elecraft] K3 - DATA mode does not TX   Don Wilhelm
• [Elecraft] K1 backlight; trimming pins   Don Wilhelm
• [Elecraft] COM port not working   Don Wilhelm
• [Elecraft] COM port not working   Don Wilhelm
• [Elecraft] KX3 Kit Builder Alert #1: Battery holder attachment screws   Don Wilhelm
• [Elecraft] KX3 NR   Don Wilhelm
• [Elecraft] K3 - Microphone Connector   Don Wilhelm
• [Elecraft] Question Regarding Direct Conversion Receiver   Don Wilhelm
• [Elecraft] 472KHz transverter for KX3   Don Wilhelm
• [Elecraft] 472KHz transverter for KX3   Don Wilhelm
• [Elecraft] K3 Receiver   Don Wilhelm
• [Elecraft] [XV432} LO Instability Problem   Don Wilhelm
• [Elecraft] [XV432} LO Instability Problem   Don Wilhelm
• [Elecraft] Low Power on K2   Don Wilhelm
• [Elecraft] Can Bluetooth be used to replace link between K2 and remote KPA100+KAT100   Don Wilhelm
• [Elecraft] K3 LONG delay in TX after TXINH removed (solved)   Don Wilhelm
• [Elecraft] Using KAT500 With Antenna Switch   Don Wilhelm
• [Elecraft] K3 will not go into XMIT with MMTTY.EXTFSK   Don Wilhelm
• [Elecraft] K3 will not go into XMIT with MMTTY.EXTFSK   Don Wilhelm
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   Don Wilhelm
• [Elecraft] Post to the group   Don Wilhelm
• [Elecraft] Post to the group   Don Wilhelm
• [Elecraft] ESSB Equalization   Don Wilhelm
• [Elecraft] Use K3/0 in another room in my QTH?   Don Wilhelm
• [Elecraft] Best Portable Antenna   Don Wilhelm
• [Elecraft] Its not over yet, I've gone back to basic K2 troubleshooting and find i have what seems a massive loss through the variable Crystal filter ?   Don Wilhelm
• [Elecraft] [K2] question about crystal filters and DSP audio filter settings   Don Wilhelm
• [Elecraft] Odd transverter bugaboo agian   Don Wilhelm
• [Elecraft] K3 does not remember band modes   Don Wilhelm
• [Elecraft] Odd transverter bugaboo agian --solved   Don Wilhelm
• [Elecraft] [OT} Whole House Surge Protection   Don Wilhelm
• [Elecraft] K2 7412 build   Don Wilhelm
• [Elecraft] K3_EZ Download Availability?   David Windisch
• [Elecraft] K3 Remote VFO tuning control   G Wood
• [Elecraft] K3 suggestion   Charles Woods
• [Elecraft] [KPA500] Hole in front panel?   Wright, Robert
• [Elecraft] [KPA500] Hole in front panel?   Wright, Robert
• [Elecraft] K3; using QuickMix software.   Wright, Robert
• [Elecraft] ESSB Equalization   Grant Youngman
• [Elecraft] K3 Key Out Issue   Paul Ormandy ZL4PW
• [Elecraft] K3 won't shut off?   Matt Zilmer
• [Elecraft] K3 Sub Receiver Problems   Matt Zilmer
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   Matt Zilmer
• [Elecraft] KX3 Battery Charging Question   Matt Zilmer
• [Elecraft] [Elecraft_K3] Deaf new kit built K3 .   Matt Zilmer
• [Elecraft] K3 or KX3 on my sailing yacht?   Matt Zilmer
• [Elecraft] ESSB Equalization   Matt Zilmer
• [Elecraft] ESSB Equalization   Matt Zilmer
• [Elecraft] [K3] KXV3 vs KXV3A   Matthew Zilmer
• [Elecraft] Broadcast band interference   Matthew Zilmer
• [Elecraft] K3 or KX3 on my sailing yacht?   Matthew Zilmer
• [Elecraft] K3; Main menu and Config menu settings   Matthew Zilmer
• [Elecraft] K3 ESSB question - data modes   Matthew Zilmer
• [Elecraft] KX3 Smarter Charger   Matthew Zilmer
• [Elecraft] [KAT500]schematic   ab2tc
• [Elecraft] [KAT500]schematic   ab2tc
• [Elecraft] [KAT500]schematic   ab2tc
• [Elecraft] [KAT500] remote in cold weather   ab2tc
• [Elecraft] OT-P3 capture of a 17M intruder   ab2tc
• [Elecraft] [KAT500] more antennas   ab2tc
• [Elecraft] OT: MFJ equipment for sale   ab2tc
• [Elecraft] OT: MFJ equipment for sale   ab2tc
• [Elecraft] [K3] Strange S meter behaviour   ab2tc
• [Elecraft] OT: MFJ equipment for sale   ab2tc
• [Elecraft] Elecraft FTP server unreachable?   ab2tc
• [Elecraft] What CW Filters do others have   ac8jd
• [Elecraft] What CW Filters do others have   ac8jd
• [Elecraft] What CW Filters do others have   ac8jd
• [Elecraft] [K2] VCO Aignment L30   andrew
• [Elecraft] KX3 EXTENDED VFO TEMPERATURE COMPENSATION PROCEDURE   AC6JA at aol.com
• [Elecraft] KX3 EXTENDED VFO TEMPERATURE COMPENSATION PROCEDURE   AC6JA at aol.com
• [Elecraft] K3 suggestion   AC6JA at aol.com
• [Elecraft] Paddle for the KX3 - has anyone tried the Begali Adventure?   AC6JA at aol.com
• [Elecraft] KX3 no cw in ssb mode?   AC6JA at aol.com
• [Elecraft] KX3 no cw in ssb mode?   AC6JA at aol.com
• [Elecraft] KX3 integration with the KPA500?   AC6JA at aol.com
• [Elecraft] KX3 with a KPA500   AC6JA at aol.com
• [Elecraft] [KAT500] Auto Tuning   AC6JA at aol.com
• [Elecraft] Remote Rig questions   JBaumgarte at aol.com
• [Elecraft] K3 questioin   JBaumgarte at aol.com
• [Elecraft] K3 questioin   JBaumgarte at aol.com
• [Elecraft] [KX3] Transverter Band TX output   Jimk8mr at aol.com
• [Elecraft] [KX3] Transverter Band TX output   Jimk8mr at aol.com
• [Elecraft] [KX3] Firmware suggestions.   Jimk8mr at aol.com
• [Elecraft] KX3 Mode Status and N1MM   N4CW at aol.com
• [Elecraft] KX3 N1MM "Error" Message Refined   N4CW at aol.com
• [Elecraft] KX3 digital   W2bpi1 at aol.com
• [Elecraft] KX3 NR   W2bpi1 at aol.com
• [Elecraft] KX3 NR   W2bpi1 at aol.com
• [Elecraft] K3 Synchronous AM   amfmtv at aol.com
• [Elecraft] For Sale - handled/rackmount brackets/panels for K2   k4tmc at aol.com
• [Elecraft] KXBC3 charging   k7sss at aol.com
• [Elecraft] K3 Key Clicks   w1gd at aol.com
• [Elecraft] Arkay Engravers / Elecraft Acrylic and Brass Plates   ken at arkayengravers.com
• [Elecraft] Post to the group   briana
• [Elecraft] k2 for sale   jcarey12 at cogeco.ca
• [Elecraft] [KX3]2M Module   amsctalx at comcast.net
• [Elecraft] K3 RTTY contest   amsctalx at comcast.net
• [Elecraft] (no subject)   amsctalx at comcast.net
• [Elecraft] KX3 digital   k3ndm at comcast.net
• [Elecraft] K2 7412 build   dan
• [Elecraft] [K3] Can't change Bands in WSPR   paul ecker
• [Elecraft] (K3) K3 WSPR settings that work for me   paul ecker
• [Elecraft] K2 - Turns on, locked in transmit   ed-ad7gr
• [Elecraft] K3 A couple of buttons do not work   lothar at erding-mail.de
• [Elecraft] [KX3]2M Module   va3bxg at gmail.com
• [Elecraft] (OT) HRD Remote Server on WIN7   va3bxg at gmail.com
• [Elecraft] KX3 digital   va3bxg at gmail.com
• [Elecraft] FW: MD's gotta go... :>)   va3bxg at gmail.com
• [Elecraft] [KX3]2M Module   gt-i at gmx.net
• [Elecraft] KX3 digital   goldtr8 at charter.net
• [Elecraft] I wish Elecraft would make this radio   hawley, charles j jr
• [Elecraft] KPA500 Power problems   hawley, charles j jr
• [Elecraft] KAT500 what backlog?   hawley, charles j jr
• [Elecraft] [KX3] Solid state amps and KX3 negative ALC   hawley, charles j jr
• [Elecraft] KPA500 Firmware loading VERY long   hawley, charles j jr
• [Elecraft] KPA 500 - Normal behavior?   hawley, charles j jr
• [Elecraft] YALB   hawley, charles j jr
• [Elecraft] KX3 Battery Holder and Batter Removal   hawley, charles j jr
• [Elecraft] COM port not working   hawley, charles j jr
• [Elecraft] Edgeport [was: COM port not working]   hawley, charles j jr
• [Elecraft] Edgeport [was: COM port not working]   hawley, charles j jr
• [Elecraft] KPA500: strange behaviour - any ideas?   hawley, charles j jr
• [Elecraft] KAT500 Performance Clarification   hawley, charles j jr
• [Elecraft] Edgeport [was: COM port not working]   hb9brj
• [Elecraft] KX3: RX dead in CW and DATA mode. Feedback MCU 1.36 / DSP 1.05   paul hippenmeyer
• [Elecraft] OT-P3 capture of a 17M intruder   n1sz at japierson.com
• [Elecraft] K3 won't shut off, turns on by itself   k3fo at juno.com
• [Elecraft] T1 autouner - remotely located   n5ib at juno.com
• [Elecraft] Best Portable Antenna   n5ib at juno.com
• [Elecraft] Broadcast band interference   w0ebb at juno.com
• [Elecraft] K3 Remote VFO tuning control   Todd - k1tm
• [Elecraft] FS: XV-432   k2qo
• [Elecraft] K3 "fun" Programmable switch display possible?   Buck - k4ia
• [Elecraft] Remote power on for k3/0 via remote rig or other   k7co
• [Elecraft] I wish Elecraft would make this radio   edward kacura
• [Elecraft] (no subject)   edward kacura
• [Elecraft] XG3 Tones?   qrv at kd4e.com
• [Elecraft] XG3 Tones?   qrv at kd4e.com
• [Elecraft] KAT500 Kit Shipping Status   ke9uw
• [Elecraft] [K3] JT65   rich kennedy
• [Elecraft] [K3] - Speaker output in various modes   rich kennedy
• [Elecraft] Elecraft CW Net Report for December 39th & 31st, 2012   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] 39th of December?   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Elecraft CW Net Report for January 13th & 14th, 2013   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Elecraft CW Net Report for January 20th & 21st, 2013   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] LP-PAN Panadapter Ser#041 For Sale   kk5na
• [Elecraft] SKN, VizKey, AF2   stan levandowski
• [Elecraft] [OT] Wanted to Buy - Sounder   stan levandowski
• [Elecraft] KX3 - "Vest Pocket DXpedition" to South Africa and Lesotho   stan levandowski
• [Elecraft] ZS2/N2DE QRV from South Africa Today, Tomorrow   stan levandowski
• [Elecraft] [KX3] ZS2/N2DE QRV from South Africa Today, Tomorrow   stan levandowski
• [Elecraft] {OT} - On the subject of "best" portable antennas   stan levandowski
• [Elecraft] {OT} - On the subject of "best" portable antennas   stan levandowski
• [Elecraft] Best Portable Antenna   stan levandowski
• [Elecraft] 7P8US   stan levandowski
• [Elecraft] 7P8US - Update   stan levandowski
• [Elecraft] K2/10 upgrade question   picmaster at mail.bg
• [Elecraft] Elecraft could offer small built transceivers, in addition to its kits   eric manning
• [Elecraft] RF Gain Control   kissov at me.com
• [Elecraft] K3 RF Gain Contol   kissov at me.com
• [Elecraft] W2   kissov at me.com
• [Elecraft] W2 problem solved   kissov at me.com
• [Elecraft] KX3 NR   kissov at me.com
• [Elecraft] NR Confusion   kissov at me.com
• [Elecraft] KX3 Smarter Charger   kissov at me.com
• [Elecraft] KX3 Smarter Charger   kissov at me.com
• [Elecraft] CW & keys   r miles
• [Elecraft] K3 LONG delay in TX after TXINH removed   Mark n2qt
• [Elecraft] K3 LONG delay in TX after TXINH removed (solved)   Mark n2qt
• [Elecraft] KPA500: strange behaviour - any ideas?   zendoc at netspace.net.au
• [Elecraft] Fwd: KPA500: strange behaviour - resolved.   zendoc at netspace.net.au
• [Elecraft] SKN, VizKey, AF2   eric norris
• [Elecraft] K3 line out   eric norris
• [Elecraft] KX3 with KAT500 and KPA500   eric norris
• [Elecraft] P3   eric norris
• [Elecraft] Strange K3 Utility Behavior   eric norris
• [Elecraft] [KX3] KXBC3 Battery Charge Times   eric norris
• [Elecraft] KX3 Smarter Charger   eric norris
• [Elecraft] K-3 power problem   Jerry pittenger
• [Elecraft] Paddle for the KX3 - has anyone tried the Begali Adventure?   pkhjr
• [Elecraft] Amp   emetcalf at q.com
• [Elecraft] Amp   emetcalf at q.com
• [Elecraft] KPA 100 Resistance Checks   raycollins
• [Elecraft] K3 S/N 7081 VFO A Inop   rboutell
• [Elecraft] K3 S/N 7081 VFO A Inop   rboutell
• [Elecraft] K3 trade.   l s
• [Elecraft] KFL3A-6K   l s
• [Elecraft] (no subject)   roger shirko
• [Elecraft] K2/10 upgrade question   sidney sudberg
• [Elecraft] K2/10 upgrade!   sidney sudberg
• [Elecraft] Elecraft K3 for sale   tbranton
• [Elecraft] K2 Can't hear the side tone but it is working!   w0iit
• [Elecraft] K3 Key Clicks   w1gd at aol.com
• [Elecraft] Question Regarding Direct Conversion Receiver   wa5pok
• [Elecraft] Can Bluetooth be used to replace link between K2 and remote KPA100+KAT100   harry weston
• [Elecraft] Can Bluetooth be used to replace link between K2 and remote KPA100+KAT100   harry weston
• [Elecraft] KX3 NB   bruce whitney
• [Elecraft] K3 RTTY contest   barry whittemore
• [Elecraft] KX3 Mobile installation   tnnyswy at yahoo.com
• [Elecraft] KPA500 Firmware loading VERY long   tnnyswy at yahoo.com
• [Elecraft] The Old Days   tnnyswy at yahoo.com
• [Elecraft] KPA500 / KAT 500   tnnyswy at yahoo.com
• [Elecraft] Lee's HiJack Mail   tnnyswy at yahoo.com
• [Elecraft] FS: NEW KXPD3 AND XG2   zumbruns
• [Elecraft] FS: KXPD3   zumbruns
• [Elecraft] (ELECRAFT) K3 RECEIVER   zumbruns
• [Elecraft] [KX3]2M Module   ~BG~
• [Elecraft] (no subject)   不銹鋼

Last message date: Thu Jan 31 22:36:53 EST 2013
Archived on: Sat Feb 2 18:27:13 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...