[Elecraft] Use K3/0 in another room in my QTH?

[Jim Rhodes]

If you use Cat to make a simple 3 wire null modem cable you could use the
other wires for keying and audio.

Jim K0XU Sent from my Xoom tablet
On Jan 28, 2013 11:31 AM, "Don Wilhelm" <w3fpr at embarqmail.com> wrote:

> Ron,
>
> You can connect the K3 and the K3/0 or another K3 using a null modem cable.
> The downside is that you do not have audio or keying capability on the
> local K3.  If you can live with that, just connect with the null modem
> serial cable - no network involved.
> Hold CONFIG down for 3 seconds to put the K3 (or K3/0) into terminal mode.
> At least that is how it worked when Wayne first developed the code - some
> things may have changed since then.
>
> 73,
> Don W3FPR
>
> On 1/28/2013 12:16 PM, Ron Midwin wrote:
>
>> Thanks Chad,
>>
>> I assume that what you're doing requires purchasing 2 of the Remote Rigs.
>>
>> I am looking for a less expensive method since I have not need to run the
>> K3 from another location using the internet.  I'd just like to know if
>> there is a way to use what I have, interconnecting the K3 and K3/0 with my
>> current network?
>>
>>
> ______________________________**______________________________**__
> Elecraft mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.**net <Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>