[Elecraft] Use K3/0 in another room in my QTH?

[Don Wilhelm]

Ron,

You can connect the K3 and the K3/0 or another K3 using a null modem cable.
The downside is that you do not have audio or keying capability on the 
local K3.  If you can live with that, just connect with the null modem 
serial cable - no network involved.
Hold CONFIG down for 3 seconds to put the K3 (or K3/0) into terminal mode.
At least that is how it worked when Wayne first developed the code - 
some things may have changed since then.

73,
Don W3FPR

On 1/28/2013 12:16 PM, Ron Midwin wrote:
> Thanks Chad,
>
> I assume that what you're doing requires purchasing 2 of the Remote Rigs.
>
> I am looking for a less expensive method since I have not need to run the
> K3 from another location using the internet.  I'd just like to know if
> there is a way to use what I have, interconnecting the K3 and K3/0 with my
> current network?
>