[Elecraft] K2 Can't hear the side tone but it is working!

[Tom McCulloch]

Good memory Andy -- I've done that and yep that's the solution,

It looks like it's on ST L and Tone Source is selectable.  The U8-4 is 
if you have the KI02 installed and the U6-25 if you don't  (I think)

Tom
wb2qdg


On 1/31/2013 10:20 PM, Andrew Moore wrote:
> There's a menu setting somewhere in there that determines the source for
> the sidetone. You probably inadvertently changed it from U8-4 to U6-25, or
> vice versa. Go into the menu settings and try setting it to whichever the
> other one is.
>
> Don't ask me how I know :)
>
> 73,
> --Andrew, NV1B
> ..
>
>
> On Thu, Jan 31, 2013 at 9:56 PM, w0iit <blawson2 at cox.net> wrote:
>
>> I have managed somehow to silence my side tone.  I can't hear it but the
>> interior keyer is working just fine(can hear it on another rcvr).  I have
>> gone into the menu and set the "ST L" and the "ST P" but get nothing.
>>
>> I have looked and looked to try to see what I have done.  Even the message
>> memories work fine.
>>
>> Worse part is that I think I did this once before and finally figured it
>> out
>> but not this time:-(
>>
>> tnx in adv!!!!!
>>
>> 73, Bart W0IIT
>> Pittsburg, KS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>