[Elecraft] K2/10 upgrade question

[Tom McCulloch]

To the group..

Do you need to use the KI02 to communicate with the amp if it is in the 
separate EC2 enclosure?  If so, do use lose use of the KI02 for 
communicating with your PC?

(I bought a used amp in the EC2 a few years back and it's still in 
mothballs because I don't have a working KI02)

Thanks
Tom wb2qdg

k2 #1103


On 1/15/2013 10:34 PM, EdKo wrote:
> Hello Sidney,
>
> I've had my K2 in both configurations.   I started out with the amp 
> built into my K2 and after a few years separated them and placed the 
> amp and the antenna tuner into it's own enclosure. With the units 
> separated I only need to disconnect a few things, grab and go to the 
> field if I want to, leaving the amp/tuner on the desk.   I only wish I 
> had made this change sooner.   If going to the field is not of 
> interest to you then just keep it in the K2.
>
> 72,
> Ed - ad7gr
>
> www.edlinko.net
> jn3.16 | rev14.6-12
>
> On 1/15/2013 7:16 PM, sidney sudberg wrote:
>> [snip]
>> Is there any reason or advantage to upgrade with the amplifier & 
>> radio in
>> one unit or in the EC2 with the KAT100-2?  I suppose it is a matter 
>> of how
>> it will be used but I guess I am looking for the experience of how 
>> others
>> use either or both configurations & why.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>