[Elecraft] No resopnse on config menu

[Don Wilhelm]

Lars,

Sorry, but you did not initially indicate that it was working previously.

My first guess is that your VFO B encoder has failed.  You could make a 
test by removing the Front Panel and swapping the encoders between A and 
B.  That step would verify that the problem is in fact the encoder.

73,
Don W3FPR

On 1/5/2013 10:39 AM, Lars Midtboe wrote:
> Yahh but nothing happen when rotating vfo-b....i have this k3 for sverals
> years soo i dont know what happen here??
>
> Any sggestions??
> All buttons are working and i tru reset with shift/power on reloaded older
> fw...nehhh no sesponse..
>
>