[Elecraft] KPA 500 - Normal behavior?

[Brett Howard]

You are using a DB-15HD cable that has all of the wires present.  There are
some lines in the DB15HD that should be cut.  If you get the official K3
cable from Elecraft some of the pins in the connector have been cut out.
The KPA500 manual will show you what pins should be present in a cable.
Make sure that your cable only has these pins present.  The KPA500
shouldn't turn on when the K3 turns on.

~Brett


On Mon, Jan 14, 2013 at 6:41 PM, Lu Romero <lromero at ij.net> wrote:

> 1170 up and running now for several months.
> I wonder if other users see what I see:
>